Selective glucose sensing in complex media using a biomimetic receptor

Glucose is a key biomedical analyte, especially relevant to the management of diabetes. Current methods for glucose determination rely on the enzyme glucose oxidase, requiring specialist instrumentation and suffering from redox-active interferents. In a new approach, a powerful and highly selective achiral glucose receptor is mixed with a sample, l-glucose is added, and the induced CD spectrum is measured. The CD signal results from competition between the enantiomers, and is used to determine the d-glucose content. The involvement of l-glucose doubles the signal range from the CD spectrometer and allows sensitivity to be adjusted over a wide dynamic range. It also negates medium effects, which must be equal for both enantiomers. The method has been demonstrated with human serum, pre-filtered to remove proteins, giving results which closely match the standard biochemical procedures, as well as a cell culture medium and a beer sample containing high (70 mM) and low (0.4 mM) glucose concentrations respectively.

A highly selective receptor, circular dichroism and chiral competition are combined in this versatile method for d-glucose analysis.     

Matrix diversion methods for improved analysis of perchlorate by suppressed ion chromatography and conductivity detection

Two inline matrix diversion methods were developed for the sensitive analysis of perchlorate in a matrix comprising up to 1000 mg l⁻¹ of chloride, sulfate and bicarbonate ions using suppressed ion chromatography and conductivity detection. The first method used a cryptand C1 concentrator column, which exhibited a high selectivity for perchlorate ion over the other matrix anions. After retaining the sample anions in a concentrator column derivatized with a crytpand phase, a rinse step was implemented with a weak base to divert the matrix ions to waste while selectively retaining perchlorate in the concentrator column for subsequent analysis. The analysis was done using a 2 mm IonPac^® AS16 or 2 mm IonPac^® AS20 separator column. The second method was a two-dimensional matrix diversion method with a focus on improving the detection sensitivity. The first dimension was used to achieve some resolution of the matrix ions from perchlorate. The perchlorate ion was then diverted into a concentrator column for subsequent analysis in the second dimension. By pursuing analysis using a 4 mm IonPac^® AS16 or IonPac^® AS20 column in the first dimension and subsequently pursuing analysis using a 2 mm IonPac^® AS16 or IonPac^® AS20 column format, excellent sensitivities were achieved when the first and second dimensions were operated at the same linear flow velocity (cm min⁻¹). While sensitive detection of perchlorate in the low μg l⁻¹ regime was achieved by the above methods in the presence of matrix ions, superior recovery for perchlorate was demonstrated under a variety of matrix concentrations by the second method.     

酪氨酸磷酸化多肽的化学选择性富集

酪氨酸激酶在生物分子的信号转导中起着非常重要的作用,目前除抗体技术外尚无有效的化学方法能够实现对酪氨酸磷酸化蛋白或多肽的选择性富集,然而抗体通常成本较高,而且往往会有模体序列的选择性识别。本文发展了一种基于化学反应的酪氨酸磷酸化肽段的选择性富集,该方法利用了β消除反应只能发生在丝氨酸和苏氨酸磷酸化多肽的特性,以反相选择方法,从而实现对酪氨酸磷酸化肽段的选择性富集。以标准多肽对其反应效率和回收率进行了考察,20分钟内丝氨酸磷酸化多肽的β消除反应效率可达99%以上,而同时酪氨酸磷酸化肽段可保持70%的回收率。进一步以六种标准蛋白混合物的酶解产物对其进行考察,经β消除反应和亲和富集之后,只有酪氨酸磷酸化多肽可以被检测出来,该方法为蛋白质酪氨酸磷酸化的分析提供了一种新的手段。     

Application of Phosphorus-31 Nuclear Magnetic Resonance Spectrosocopy for the Study of Human Diabetic Cataractogenesis

Intact human Senses incubated at 5.5 mM (normal) and 35.5 mM glucose were examined by phosphorus-31 nuclear magnetic resonance (31P NMR) spectroscopy. Lense in 35.5 mM glucose showed an altered metabolic steady-state characterized by a lowered adenosine triphosphate/inorganic orthophosphate ratio. ³¹P NMR spectroscopy can be used to measure metabolic changes in the lens. This model offers an important means to study dynamic metabolism in the human lens in the setting of diabetic cataractogenesis.     

High capacity, charge-selective protein uptake by polyelectrolyte brushes

Surface plasmon resonance was used to measure binding of proteins from solution to poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) brushes end-grafted from gold surfaces by atom transfer radical polymerization (ATRP). PDMAEMA brushes were prepared with a variety of grafting densities and degrees of polymerization. These brushes displayed charge selective protein uptake. The extent of uptake for net negatively charged bovine serum albumin (BSA) scaled linearly with the surface mass concentration of grafted PDMAEMA, regardless of grafting density. BSA was bound at a constant ratio of 120 DMAEMA monomer units per protein molecule for all brushes examined. The equivalent three-dimensional concentration of BSA bound in the brush (i.e., the bound BSA surface excess concentration divided by the brush thickness) decreased monotonically with decreasing grafting density. The concentration of BSA bound within brushes prepared at higher grafting densities was comparable with the aqueous protein solubility limit. BSA desorption from the brush required changes in solution pH and/or ionic strength to eliminate its net electrostatic attraction to PDMAEMA. Net positively charged lysozyme was completely rejected by the PDMAEMA brushes.     

Irreversible Collapse of Poly(vinyl stearate) Monolayers at the Air-Water Interface

The collapse of Langmuir monolayers of poly(vinyl stearate) (PVS) at the air-water interface has been investigated by combined measurements of the surface pressure-area isotherms and Brewster angle microscopy (BAM). Atomic force microscopy (AFM) has been used to gain out-of-plane structural information on collapsed films transferred onto a solid substrate by a modified version of the inverse Langmuir-Schaefer deposition method. At high areas per monomer repeat unit, BAM imaging revealed that the films are heterogeneous, with large solidlike domains (25-200 mum in diameter) coexisting with liquidlike domains. Upon film compression, the domains coalesced to form a homogeneous monolayer before the film collapsed at constant pressure, forming irreversible three-dimensional (3D) structures. BAM images showed that two 3D structures coexisted: buckles of varying width extending across the surface and perpendicular to the direction of the compression and dotted islandlike structures. Upon expansion, the film fractured and both 3D protrusions persisted, explaining the marked hysteresis recorded in the Langmuir isotherms. Experiments with AFM confirmed the 3D nature of both protrusions and revealed that many buckles contain substructures corresponding to narrow buckles whose heights are a multiple of a single bilayer. Additionally, many multilayer islands with diameters spanning from 0.2 mum to over 3.5 mum were characterized by varying heights between 2 nm and up to over 50 nm. The key to the formation of the irreversible 3D structures is the presence of large inhomogeneities in the PVS monolayer, and a generalized phenomenological model is proposed to explain the collapse observed.     

Effect of surface condition on liquid crystal photoalignment by light-induced azo dye adsorption phenomena

The effect of surface condition on the photoalignment of light-induced methyl red (MR) adsorption phenomena on various substrates based on azo dye-doped liquid crystals is investigated. The results show that the polar surface energy determines the initiation of MR adsorption phenomena. The surface polarity energy of different substrates, which are modulated by oxygen plasma treatment (OPT), is further examined using the sessile drop method. The results also indicate that the uniformity and efficiency of MR adsorption can be enhanced by OPT. Light intensity influences the MR adsorption rate. The uniformity of MR adsorption onto various substrates is analysed via polarised optical microscopy.