Chloride substitution of [CpRu(dppf)Cl] with sulfur-containing ligands

The reactions of CpRu(dppf)Cl (1) with the sulfur-containing ligands, thiophenol HSPh, 2-mercaptopyridine C₅H₄N(SH), thiourea SC(NH₂)₂, vinylene trithiocarbonate SCS(CH)₂S and ethylene trithiocarbonate SCS(CH₂)₂S, yielded chloro-substituted derivatives, viz. the mono-ruthenium(II) complexes CpRu(dppf)(SPh) (2), [CpRu(dppf)(SC₅H₄NH)]BPh₄ (3)BPh₄, [CpRu(dppf)(SC(NH₂)₂]PF₆ (4)PF₆, [CpRu(dppf)(SCS(CH)₂S)]Cl (5)Cl and [CpRu(dppf)(SCS(CH₂)₂S)]Cl (6)Cl, respectively. Treatment of 1 with AuCl(SMe₂) in the presence of NH₄PF₆ gave [(CpRu(dppf)(SMe₂)]PF₆ (7)PF₆. The reaction of 1 or 6 with SnCl₂ resulted in cleavage of chloro and dithiocarbonate ligands, respectively, to give CpRu(dppf)SnCl₃ (8). All complexes were spectroscopically characterized and the structures of 2 and cationic complexes 4-7 were determined by single-crystal diffraction analyses.     

Evaluating formation and growth mechanisms of silica particles using fluorescence anisotropy decay analysis

At present, there is no direct experimental evidence that primary silica particles, which exist only transiently for a few seconds during the St?ber silica synthesis, can be stable in aqueous solutions. In the present work, we show that primary silica particles are formed spontaneously after the dissolution of diglycerylsilane (DGS) in aqueous solutions and remain stable for prolonged periods of time. By using time-resolved fluorescence anisotropy (TRFA), we demonstrate that this unique property of DGS is ascribed to the slow kinetics of silica particle growth in diluted sols at pH approximately 9.0. The anisotropy decay of the cationic dye rhodamine 6G (R6G), which strongly adsorbs to silica oligomers and nanoparticles in DGS sols, could be fit to three components: a fast (picosecond) scale component associated with free R6G, a slower (nanosecond) rotational component associated with R6G bound to primary silica particles, and a residual (nondecaying) anisotropy component associated with R6G that was bound to secondary or larger particles that were unable to rotate on the time scale of the R6G emission lifetime (4 ns). The data show that, under conditions where fast hydrolysis is obtained, the initial size of the nuclei depends on the silica concentration, with larger nuclei being present in more concentrated sols, while the rate of growth of primary particles depends on both silica concentration and solution pH. At low silica concentrations and high pHs, it was possible to observe the growth of stable, nonaggregating primary silica particles by a mechanism involving rapid nucleation followed by monomer addition. The presence of stable primary particles was confirmed by atomic force microscopy (AFM) imaging. At higher silica concentrations and lower pHs, there was an increase in the initial size of the nuclei formed, which subsequently grew to a larger radius (> 4.5 nm) or aggregated with time, and in such cases, nucleation and aggregation occurred simultaneously in the early stage of silica formation. The data clearly show the power of time-resolved fluorescence anisotropy decay measurements for probing the growth of silica colloids and show that this method is useful for elucidating the mechanism of particle formation and growth in situ.     

An economic and environmental comparison of a biochemical and a thermochemical lignocellulosic ethanol conversion processes

With the world’s focus on rapidly deploying second generation biofuels technologies, there exists today a good deal of interest in how yields, economics, and environmental impacts of the various conversion processes of lignocellulosic biomass to transportation fuels compare. Although there is a good deal of information regarding these conversion processes, this information is typically very difficult to use on a comparison basis because different underlying assumptions, such as feedstock costs, plant size, co-product credits or assumed state of technology, have been utilized. In this study, a rigorous comparison of different biomass to transportation fuels conversion processes was performed with standard underlying economic and environmental assumptions so that exact comparisons can be made. This study looked at promising second-generation conversion processes utilizing biochemical and thermochemical gasification technologies on both a current and an achievable state of technology in 2012. The fundamental finding of this study is that although the biochemical and thermochemical processes to ethanol analyzed have their individual strengths and weaknesses, the two processes have very comparable yields, economics, and environmental impacts. Hence, this study concludes that based on this analysis there is not a distinct economic or environmental impact difference between biochemical and thermochemical gasification processes for second generation ethanol production.     

One step microelectroelution concentration method for efficient coupling of sodium dodecylsulfate gel electrophoresis and matrix-assisted laser desorption time-of-flight mass spectrometry for protein analysis

The coupling of the widely used separation technique of conventional sodium dodecylsulfate polyacrylamide gel electrophoresis (SDS-PAGE) with the mass accuracy measurement capability of mass Spectrometry (MS) provides a very powerful analytical technique. However, at present, there is no simple, definitive method for coupling the two methods. Typically, separated proteins are extracted from the gel, either as the native protein or as a peptide mixture after in-gel proteolytic digestion, and then analyzed by mass Spectrometry. However, the various extraction techniques described previously have been labor intensive and require a large number of steps. The mass Spectrometry analysis of very low concentrations of in vivo derived proteins requires minimum sample handling and on-line concentration. Therefore, we have developed an efficient microelectroelution technique that is applied in a single step manner and contains an on-line concentration device. Initial results from this system have shown a high efficiency of analyte elution from the gel and a simple, robust technique for the coupling of SDS-containing gels with MALDI-TOF-MS analysis and a capability of analyzing proteins at the subpicomole level.     

Chemical-genetic screen identifies riluzole as an enhancer of Wnt/β-catenin signaling in melanoma

To identify new protein and pharmacological regulators of Wnt/β-catenin signaling, we used a cell-based reporter assay to screen a collection of 1857 human-experienced compounds for their ability to enhance activation of the β-catenin reporter by a low concentration of WNT3A. This identified 44 unique compounds, including the FDA-approved drug riluzole, which is presently in clinical trials for treating melanoma. We found that treating melanoma cells with riluzole in?vitro enhances the ability of WNT3A to regulate gene expression, to promote pigmentation, and to decrease cell proliferation. Furthermore riluzole, like WNT3A, decreases metastases in a mouse melanoma model. Interestingly, siRNAs targeting the metabotropic glutamate receptor, GRM1, a reported indirect target of riluzole, enhance β-catenin signaling. The unexpected regulation of β-catenin signaling by both riluzole and GRM1 has implications for the future uses of this drug.     

Characterization of three saponins from a fraction using 1D DOSY as a solvent signal suppression tool. Agabrittonosides E–F. Furostane Saponins from Agave brittoniana Trel. spp. Brachypus

A careful NMR analysis, especially by 1D TOCSY and 1D ROESY, of a refined saponin fraction allowed us to determine the structure of three saponins from a polar extract of Agave brittoniana Trel. spp. Brachypus leaves. The use of 1D DOSY for the suppression of the solvent signal was useful to obtain the chemical shifts of anomeric signals. A full assignment of the ¹H and ¹³C spectral data for the new saponins, agabrittonosides E–F (1–2) and the well‐known Karatavioside C (3) and their methoxyl derivatives, is reported. The structures were established using a combination of 1D and 2D (¹H, ¹H‐COSY, TOCSY, ROESY, g‐HSQC, g‐HMBC and g‐HSQC‐TOCSY) NMR techniques and ESI–MS. In addition, the methoxylation of these furostane saponins in the presence of MeOH was studied. Copyright © 2010 John Wiley & Sons, Ltd.     

Crystallization behavior of isotactic propylene‐1‐hexene random copolymer revealed by time‐resolved SAXS/WAXD techniques

The crystallization behavior of isotactic propylene‐1‐hexene (PH) random copolymer having 5.7% mole fraction of hexene content was investigated using simultaneous time‐resolved small‐angle X‐ray scattering (SAXS) and wide‐angle X‐ray diffraction (WAXD) techniques. For this copolymer, the hexene component cannot be incorporated into the unit cell structure of isotactic polypropylene (iPP). Only α‐phase crystal form of iPP was observed when samples were melt crystallized at temperatures of 40 °C, 60 °C, 80 °C, and 100 °C. Comprehensive analysis of SAXS and WAXD profiles indicated that the crystalline morphology is correlated with crystallization temperature. At high temperatures (e.g., 100 °C) the dominant morphology is the lamellar structure; while at low temperatures (e.g., 40 °C) only highly disordered small crystal blocks can be formed. These morphologies are kinetically controlled. Under a small degree of supercooling (the corresponding iPP crystallization rate is slow), a segmental segregation between iPP and hexene components probably takes place, leading to the formation of iPP lamellar crystals with a higher degree of order. In contrast, under a large degree of supercooling (the corresponding iPP crystallization rate is fast), defective small crystal blocks are favored due to the large thermodynamic driving force and low chain mobility. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 26–32, 2010     

Interplay between bulk viscoelasticity and surface energy in autohesive tack of rubber‐tackifier blends

The effects of change in surface energy and bulk viscoelastic properties on the autohesive tack strength of brominated isobutylene‐co‐p‐methylstyrene (BIMS) rubber have been investigated by the addition of hydrocarbon resin (HCR) tackifier and maleated hydrocarbon resin (MA‐g‐HCR) tackifier. The addition of compatible HCR tackifier results in a reasonable increment in the tack strength of BIMS rubber by modifying only the bulk viscoelastic properties (compliance, entanglement molecular weight, relaxation time, self‐diffusion, and monomer friction coefficient values) of BIMS rubber to perform better during the course of bonding and debonding steps of the peel test. Incorporation of MA‐g‐HCR tackifier (containing 5–20 wt % of grafted maleic anhydride) steadily increases the tack strength of BIMS rubber further by precisely modifying both the surface energy and bulk viscoelastic properties to perform much better in the bonding and debonding steps. However, beyond 20 wt % of grafted maleic anhydride in the HCR tackifier, the tack strength starts decreasing due to the incompatibility between the blend components, and hence, the bulk viscoelastic properties required for bond formation are severely retarded by the interrelated reinforcing effect and the phase separation effect of the brittle MA‐g‐HCR tackifier in the BIMS rubber. Hence, the polar groups in a tackifier will contribute to significant enhancement of autohesive tack strength only if the bulk viscoelastic property of the rubber‐tackifier blend is favorable for bond formation and bond separation. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 972–982, 2010     

Copper(I) complexes with bipyridyl and phosphine ligands: a systematic study

Phosphorescent copper(I) complexes carrying 2,2'-bipyridyl derivatives and phosphine ligands have been prepared and fully characterised. The role of the bipyridyl as well as the phosphine ligands in defining the optical, as well as the chemical properties of the complexes, are discussed. The light emission of these complexes is investigated as a function of the molecular geometry: rigid complexes with restricted freedom to rearrange in the excited state are found to show a quantum yield of phosphorescence one order of magnitude higher than those complexes with no steric constraint. The complexes have been extruded in a polymer matrix as a proof of principle of their processability.     

Solid-phase synthesis of imidazo[4,5-b]pyridin-2-ones and related urea derivatives by cyclative cleavage of a carbamate linkage

A solid-phase synthesis of substituted cyclic urea derivatives as potential heterocyclic library scaffolds is described. 2-Amino-3-nitropyridine is attached to Wang resin via a carbamate linkage. Reduction of the nitro group was achieved with SnCl(2).2H(2)O. Reductive alkylation with a range of substituted benzaldehydes followed by cyclative cleavage afforded a small library of 3-substituted imidazo[4,5-b]pyridine-2-ones in 33-45% yield and 59-88% purity. Subsequently, this methodology was applied to the synthesis of 3-substituted imidazo[4,5-f]quinolin-2-ones.