Effect of oxygen evolution catalysts on hematite nanorods for solar water oxidation

Photochemical deposition of Co and Ni based oxygen evolution catalysts on hematite nanorods cathodically shifted the onset potential of photocurrent near to the flat band potential of hematite. A 9.5 fold enhancement in the photocurrent density at 0.86 V vs. RHE compared to the parent hematite photoanode was observed with the Ni-Bi/Fe(2)O(3) photoanode.     

The synthesis,structural characterization and biological evaluation of N‐(ferrocenylmethyl amino acid) fluorinated benzene‐carboxamide derivatives as potential anticancer agents

A series of N‐(ferrocenylmethyl amino acid) fluorinated benzene‐carboxamide derivatives 4b , 4c , 4d , 4e , 4f , 4g , 4h , 4i and 5b , 5c , 5d , 5e , 5f , 5g , 5h , 5i have been synthesized by coupling ferrocenylmethyl amine 3 with various substituted N‐(fluorobenzoyl) amino acid derivatives using the standard N‐(3‐dimethylaminopropyl)‐N′‐ethylcarbodiimide hydrochloride, 1‐hydroxybenzotriazole protocol. The amino acids employed in this study were glycine and L‐alanine. All of the compounds were fully characterized using a combination of ¹H NMR, ¹³C NMR, ¹⁹F NMR, distortionless enhancement by polarization transfer (DEPT)‐135, ¹H–¹H correlation spectroscopy (COSY) and ¹H–¹³C COSY (heteronuclear multiple‐quantum correlation) spectroscopy. The compounds were biologically evaluated on the oestrogen‐positive MCF‐7 breast cancer cell line. Compounds 4g , 4i , 5h and 5i exhibited cytotoxic effects on the MCF‐7 breast cancer cell line. N‐(Ferrocenylmethyl‐L‐alanine)‐3,4,5‐trifluorobenzene‐carboxamide ( 5h ) was the most active compound, with an IC₅₀ value of 2.84 μm . Compounds 4i , 5h and 5i had lower IC₅₀ values than that found for the clinically employed anticancer drug cisplatin (IC₅₀ = 16.3 μm against MCF‐7). Guanine oxidation studies confirmed that 5h was capable of generating oxidative damage via a reactive oxygen species‐mediated mechanism. Copyright © 2013 John Wiley & Sons, Ltd.     

Influence of branch length asymmetry on the electrophoretic mobility of rigid rod-like DNA

The electrophoretic mobility of three-arm asymmetric star DNA molecules, produced by incorporating a short DNA branch at the midpoint of rigid-rod linear DNA fragments, is investigated in polyacrylamide gels. We determine how long the added branch must be to separate asymmetric star DNA from linear DNA with the same total molecular weight. This work focuses on two different geometric progressions of small DNA molecules. First, branches of increasing length were introduced at the center of a linear DNA fragment of constant length. At a given gel concentration, we find that relatively small branch lengths are enough to cause a detectable reduction in electrophoretic mobility. The second geometric progression starts with a small branch on a linear DNA fragment. As the length of this branch is increased, the DNA backbone length is decreased such that the total molar mass of the molecule remains constant. The branch length was then increased until the asymmetric branched molecule becomes a symmetric three-arm star polymer, allowing the effect of molecular topology on mobility to be studied independent of size effects. DNA molecules with very short branches have a mobility smaller than linear DNA of identical molar mass. The reason for this change in mobility when branching is introduced is not known, however, we explore two possible explanations in this article. (i) The branched DNA could have a greater interaction with the gel than linear DNA, causing it to move slower; (ii) the linear DNA could have modes of motion or access to pores that are unavailable to the branched DNA.     

Carbazole compounds as host materials for triplet emitters in organic light-emitting diodes: polymer hosts for high-efficiency light-emitting diodes

A carbazole homopolymer and carbazole copolymers based on 9,9'-dialkyl-[3,3']-bicarbazolyl, 2,5-diphenyl-[1,3,4]-oxadiazole and 9,9-bis(4-[3,7-dimethyloctyloxy]phenyl)fluorene were synthesized and their electrical and photophysical properties were characterized with respect to their application as host in phosphorescent polymer light-emitting diodes. It is shown that the triplet energy of a polymer depends on the specific connections between its building blocks. Without changing the composition of the polymer, its triplet energy can be increased from 2.3 to 2.6 eV by changing the way in which the different building blocks are coupled together. For poly(9-vinylcarbazole) (PVK), a carbazole polymer often used as host for high-energy triplet emitters in polymer light-emitting diodes, a large hole-injection barrier of about 1 eV exists due to the low-lying HOMO level of PVK. For all carbazole polymers presented here, the HOMO levels are much closer to the Fermi level of a commonly used anode such as ITO and/or a commonly used hole-injection layer such as PEDOT:PSS. This makes high current densities and consequently high luminance levels possible at moderate applied voltages in polymer light-emitting diodes. A double-layer polymer light-emitting diode is constructed comprising a PEDOT:PSS layer as hole-injection layer and a carbazole-oxadiazole copolymer doped with a green triplet emitter as emissive layer that shows an efficacy of 23 cd/A independent of current density and light output.     

Chloride substitution of [CpRu(dppf)Cl] with sulfur-containing ligands

The reactions of CpRu(dppf)Cl (1) with the sulfur-containing ligands, thiophenol HSPh, 2-mercaptopyridine C₅H₄N(SH), thiourea SC(NH₂)₂, vinylene trithiocarbonate SCS(CH)₂S and ethylene trithiocarbonate SCS(CH₂)₂S, yielded chloro-substituted derivatives, viz. the mono-ruthenium(II) complexes CpRu(dppf)(SPh) (2), [CpRu(dppf)(SC₅H₄NH)]BPh₄ (3)BPh₄, [CpRu(dppf)(SC(NH₂)₂]PF₆ (4)PF₆, [CpRu(dppf)(SCS(CH)₂S)]Cl (5)Cl and [CpRu(dppf)(SCS(CH₂)₂S)]Cl (6)Cl, respectively. Treatment of 1 with AuCl(SMe₂) in the presence of NH₄PF₆ gave [(CpRu(dppf)(SMe₂)]PF₆ (7)PF₆. The reaction of 1 or 6 with SnCl₂ resulted in cleavage of chloro and dithiocarbonate ligands, respectively, to give CpRu(dppf)SnCl₃ (8). All complexes were spectroscopically characterized and the structures of 2 and cationic complexes 4-7 were determined by single-crystal diffraction analyses.     

Evaluating formation and growth mechanisms of silica particles using fluorescence anisotropy decay analysis

At present, there is no direct experimental evidence that primary silica particles, which exist only transiently for a few seconds during the St?ber silica synthesis, can be stable in aqueous solutions. In the present work, we show that primary silica particles are formed spontaneously after the dissolution of diglycerylsilane (DGS) in aqueous solutions and remain stable for prolonged periods of time. By using time-resolved fluorescence anisotropy (TRFA), we demonstrate that this unique property of DGS is ascribed to the slow kinetics of silica particle growth in diluted sols at pH approximately 9.0. The anisotropy decay of the cationic dye rhodamine 6G (R6G), which strongly adsorbs to silica oligomers and nanoparticles in DGS sols, could be fit to three components: a fast (picosecond) scale component associated with free R6G, a slower (nanosecond) rotational component associated with R6G bound to primary silica particles, and a residual (nondecaying) anisotropy component associated with R6G that was bound to secondary or larger particles that were unable to rotate on the time scale of the R6G emission lifetime (4 ns). The data show that, under conditions where fast hydrolysis is obtained, the initial size of the nuclei depends on the silica concentration, with larger nuclei being present in more concentrated sols, while the rate of growth of primary particles depends on both silica concentration and solution pH. At low silica concentrations and high pHs, it was possible to observe the growth of stable, nonaggregating primary silica particles by a mechanism involving rapid nucleation followed by monomer addition. The presence of stable primary particles was confirmed by atomic force microscopy (AFM) imaging. At higher silica concentrations and lower pHs, there was an increase in the initial size of the nuclei formed, which subsequently grew to a larger radius (> 4.5 nm) or aggregated with time, and in such cases, nucleation and aggregation occurred simultaneously in the early stage of silica formation. The data clearly show the power of time-resolved fluorescence anisotropy decay measurements for probing the growth of silica colloids and show that this method is useful for elucidating the mechanism of particle formation and growth in situ.     

An economic and environmental comparison of a biochemical and a thermochemical lignocellulosic ethanol conversion processes

With the world’s focus on rapidly deploying second generation biofuels technologies, there exists today a good deal of interest in how yields, economics, and environmental impacts of the various conversion processes of lignocellulosic biomass to transportation fuels compare. Although there is a good deal of information regarding these conversion processes, this information is typically very difficult to use on a comparison basis because different underlying assumptions, such as feedstock costs, plant size, co-product credits or assumed state of technology, have been utilized. In this study, a rigorous comparison of different biomass to transportation fuels conversion processes was performed with standard underlying economic and environmental assumptions so that exact comparisons can be made. This study looked at promising second-generation conversion processes utilizing biochemical and thermochemical gasification technologies on both a current and an achievable state of technology in 2012. The fundamental finding of this study is that although the biochemical and thermochemical processes to ethanol analyzed have their individual strengths and weaknesses, the two processes have very comparable yields, economics, and environmental impacts. Hence, this study concludes that based on this analysis there is not a distinct economic or environmental impact difference between biochemical and thermochemical gasification processes for second generation ethanol production.     

One step microelectroelution concentration method for efficient coupling of sodium dodecylsulfate gel electrophoresis and matrix-assisted laser desorption time-of-flight mass spectrometry for protein analysis

The coupling of the widely used separation technique of conventional sodium dodecylsulfate polyacrylamide gel electrophoresis (SDS-PAGE) with the mass accuracy measurement capability of mass Spectrometry (MS) provides a very powerful analytical technique. However, at present, there is no simple, definitive method for coupling the two methods. Typically, separated proteins are extracted from the gel, either as the native protein or as a peptide mixture after in-gel proteolytic digestion, and then analyzed by mass Spectrometry. However, the various extraction techniques described previously have been labor intensive and require a large number of steps. The mass Spectrometry analysis of very low concentrations of in vivo derived proteins requires minimum sample handling and on-line concentration. Therefore, we have developed an efficient microelectroelution technique that is applied in a single step manner and contains an on-line concentration device. Initial results from this system have shown a high efficiency of analyte elution from the gel and a simple, robust technique for the coupling of SDS-containing gels with MALDI-TOF-MS analysis and a capability of analyzing proteins at the subpicomole level.     

Chemical-genetic screen identifies riluzole as an enhancer of Wnt/β-catenin signaling in melanoma

To identify new protein and pharmacological regulators of Wnt/β-catenin signaling, we used a cell-based reporter assay to screen a collection of 1857 human-experienced compounds for their ability to enhance activation of the β-catenin reporter by a low concentration of WNT3A. This identified 44 unique compounds, including the FDA-approved drug riluzole, which is presently in clinical trials for treating melanoma. We found that treating melanoma cells with riluzole in?vitro enhances the ability of WNT3A to regulate gene expression, to promote pigmentation, and to decrease cell proliferation. Furthermore riluzole, like WNT3A, decreases metastases in a mouse melanoma model. Interestingly, siRNAs targeting the metabotropic glutamate receptor, GRM1, a reported indirect target of riluzole, enhance β-catenin signaling. The unexpected regulation of β-catenin signaling by both riluzole and GRM1 has implications for the future uses of this drug.     

Characterization of three saponins from a fraction using 1D DOSY as a solvent signal suppression tool. Agabrittonosides E–F. Furostane Saponins from Agave brittoniana Trel. spp. Brachypus

A careful NMR analysis, especially by 1D TOCSY and 1D ROESY, of a refined saponin fraction allowed us to determine the structure of three saponins from a polar extract of Agave brittoniana Trel. spp. Brachypus leaves. The use of 1D DOSY for the suppression of the solvent signal was useful to obtain the chemical shifts of anomeric signals. A full assignment of the ¹H and ¹³C spectral data for the new saponins, agabrittonosides E–F (1–2) and the well‐known Karatavioside C (3) and their methoxyl derivatives, is reported. The structures were established using a combination of 1D and 2D (¹H, ¹H‐COSY, TOCSY, ROESY, g‐HSQC, g‐HMBC and g‐HSQC‐TOCSY) NMR techniques and ESI–MS. In addition, the methoxylation of these furostane saponins in the presence of MeOH was studied. Copyright © 2010 John Wiley & Sons, Ltd.