Substituted metal carbonyls XIII. Fe(CO)4(η-dppf) [where DPPF = (Ph2PC5H4)2Fe]: a convenient building block for heterometallic complexes

The potential of Fe(CO)₄(η¹-dppf) (dppf = 1,1′-bis(diphenylphosphino)ferrocene) as a precursor for heterometallic species is fully expanded in the synthesis of (OC)₄Fe(μ-dppf)Cr(CO)₅, (OC)₄Fe(μ-dppf)W(CO)₅, and (OC)₄Fe(μ-dppf)Mn₂(CO)₉, all of which have been characterized by IR, NMR (¹H and ³¹P) and elemental analyses. The low energy requirement of TMNO (Me₃NO · 2H₂O)decarbonylation allows the formation of monosubstituted Mn₂(CO)₁₀ as the major product. This aspect is further substantiated by the isolation of Mn₄(CO)₁₈(μ-dppf) in which the single bridging of a diphosphine group between two Mn₂(CO)₉ moieties is unprecedented.     

Ruthenium(II) complexes of monodonor ligands: efficient reagents for asymmetric ketone hydrogenation

[Chemical reaction: See text] A series of BINOL-derived ligands have been prepared and incorporated into ruthenium(II) complexes containing a diamine ligand. The complexes have proven to be excellent catalysts for the asymmetric hydrogenation of ketones, giving reduction products with enantiomeric excesses of up to 99%.     

The crystal and molecular structure of dodecafluorotriphenylene, C18F12

The dodecafluorotriphenylene molecule is considerably distorted from planarity by steric interactions between the “ortho” fluorine atoms which approach to within 2.41 Å of each other (or about 0.3 Å closer than the sum of the van der Waals radii for two fluorine atoms, 2.70 Å).     

Compositional and 2H NMR studies of bis(benzene)chromium composites of mesoporous vanadium-niobium mixed oxides

New mesoporous niobium oxides with 5, 10, and 15 mol% vanadium(V) doped into the walls of the structure were synthesized by the ligand-assisted templating method with an octadecylamine template. These materials were characterized by XRD, XPS, EPR, elemental analysis, and nitrogen adsorption before being treated with excess bis(benzene)chromium to give new composites with an organometallic phase in the walls. All materials were also characterized by EPR, XRD, nitrogen adsorption, XPS, SQUID magnetometry, and elemental analysis. The materials with higher percentages of vanadium absorbed more bis(benzene)chromium, because this process depends largely on the electron transfer between the organometallic and the walls of the mesostructure and vanadium(V) is a stronger oxidant than niobium(V). Conductivity studies on these materials revealed that the ratio of Cr(0) to Cr(l) in the pores was more important than the absolute Cr loading level in governing electron transport properties but that increasing the V content led to more insulating behavior regardless of the Cr concentration. Solid-state 2H NMR studies on perdeuteriobenzene analogues of these composites showed the presence of the neutral and cationic Cr species in different ratios depending on the loading. Tumbling of these species was also slow on the NMR time scale, indicating that the charge-carrying Cr species are not rapidly moving through the pore channels of the mesostructure. This suggests that the walls of the structure may play a key role in charge transfer in these composites, contrary to what was previously believed.     

Tests for liquid chromatographs

Summary The paper describes tests for liquid chromatographs to assess the autosampler and pump flow rate precision; suitability of the instrument for normal phase chromatography; UV detector performance; and external band broadening characteristics. Tests for mixing and proportioning characteristics of solvent pumps and performance of diode array detectors are also considered. These tests are designed to evaluate the performance of both newly released liquid chromatography equipment and equipment already in operation. Data from evaluations carried out by instrument manufacturer’s and suppliers is reported and discussed. This data offers specifications to a common format for initial selection of instruments prior to purchase.     

Differentiation and quantitation of isomeric dipeptides by low-energy dissociation of copper(II)-bound complexes

Application of the kinetic method based on the dissociation of transition metal centered cluster ions is extended from chiral analysis (Tao, W. A.; Zhang, D.; Nikolaev, E. N.; Cooks, R. G. J. Am. Chem. Soc. 2000, 122, 10598) to quantitative analysis of isomeric mixtures, including those with Leu/Ile substitutions. Copper(II)-bound complexes of pairs of peptide isomers are generated by electrospray ionization mass spectrometry and the trimeric complex [CuII(ref)2(A) - H]+ (analyte A, a mixture of isomeric peptides; reference compound ref, usually a peptide) is caused to undergo collisional dissociation. Competitive loss of the neutral reference compound or the neutral analyte yields two ionic products and the ratio of rates of the two competitive dissociations, viz. the product ion branching ratio R is shown to depend strongly on the regiochemistry of the analyte in the precursor [CuII(A)(ref)2 - H]+ complex ion. Calibration curves are constructed by relating the branching ratio measured by the kinetic method, to the isomeric composition of the mixture to allow rapid quantitative isomer analysis.     

Statistical approach for risk assessment of aflatoxin sampling plan used by manufacturers for raw shelled peanuts

Processed food manufacturers often use acceptance sampling plans to screen out lots with unacceptable levels of contamination from incoming raw material streams. Sampling plan designs are determined by specifying sample sizes, sample preparation methods, analytical test methods, and accept/reject criteria. Sampling plan performance can be indicated by plotting acceptance probability versus contamination level as an operating characteristic (OC) curve. In practice, actual plan performance depends on the level of contamination in the incoming lot stream. This level can vary considerably over time, among different crop varieties, and among locales. To better gauge plan performance, a method of coupling an OC curve and crop distributions is proposed. The method provides a precise probabilistic statement about risk and can be easily performed with commercial spreadsheet software.     

Capillary column gas chromatographic method using electron-capture detection for the simultaneous determination of nicardipine and its pyridine metabolite II in plasma

A rapid, specific and direct method based on capillary column gas chromatography with electron-capture detection is described for the simultaneous determination of nicardipine, a new calcium antagonist, and its pyridine metabolite II in human plasma. In this method, the nicardipine, its pyridine metabolite II and internal standard are extracted from the plasma and then partially purified by acid-base partitioning prior to the final injection onto the capillary column gas chromatograph for quantification by means of an electron-capture detector. The quantification limit of the method is 1 ng/ml of plasma for both nicardipine and its pyridine metabolite II. The coefficients of variation for nicardipine and the pyridine metabolite II at concentrations of 1-50 ng/ml are less than 7% and less than 9% (n = 4), respectively. The method has been validated against a previously developed high-performance liquid chromatographic method (sensitivity 5 ng/ml).     

Influence of branch length asymmetry on the electrophoretic mobility of rigid rod-like DNA

The electrophoretic mobility of three-arm asymmetric star DNA molecules, produced by incorporating a short DNA branch at the midpoint of rigid-rod linear DNA fragments, is investigated in polyacrylamide gels. We determine how long the added branch must be to separate asymmetric star DNA from linear DNA with the same total molecular weight. This work focuses on two different geometric progressions of small DNA molecules. First, branches of increasing length were introduced at the center of a linear DNA fragment of constant length. At a given gel concentration, we find that relatively small branch lengths are enough to cause a detectable reduction in electrophoretic mobility. The second geometric progression starts with a small branch on a linear DNA fragment. As the length of this branch is increased, the DNA backbone length is decreased such that the total molar mass of the molecule remains constant. The branch length was then increased until the asymmetric branched molecule becomes a symmetric three-arm star polymer, allowing the effect of molecular topology on mobility to be studied independent of size effects. DNA molecules with very short branches have a mobility smaller than linear DNA of identical molar mass. The reason for this change in mobility when branching is introduced is not known, however, we explore two possible explanations in this article. (i) The branched DNA could have a greater interaction with the gel than linear DNA, causing it to move slower; (ii) the linear DNA could have modes of motion or access to pores that are unavailable to the branched DNA.     

One step microelectroelution concentration method for efficient coupling of sodium dodecylsulfate gel electrophoresis and matrix-assisted laser desorption time-of-flight mass spectrometry for protein analysis

The coupling of the widely used separation technique of conventional sodium dodecylsulfate polyacrylamide gel electrophoresis (SDS-PAGE) with the mass accuracy measurement capability of mass Spectrometry (MS) provides a very powerful analytical technique. However, at present, there is no simple, definitive method for coupling the two methods. Typically, separated proteins are extracted from the gel, either as the native protein or as a peptide mixture after in-gel proteolytic digestion, and then analyzed by mass Spectrometry. However, the various extraction techniques described previously have been labor intensive and require a large number of steps. The mass Spectrometry analysis of very low concentrations of in vivo derived proteins requires minimum sample handling and on-line concentration. Therefore, we have developed an efficient microelectroelution technique that is applied in a single step manner and contains an on-line concentration device. Initial results from this system have shown a high efficiency of analyte elution from the gel and a simple, robust technique for the coupling of SDS-containing gels with MALDI-TOF-MS analysis and a capability of analyzing proteins at the subpicomole level.