Structures and energies of seleno derivatives of biuret.Ab Initio comparative studies of diselenobiuret, selenobiuret, and selenothiobiuret

Ab initio studies (LCAO-MO method) on conformers of three seleno derivatives of the biuret molecules diselenobiuret [I], selenobiuret [II], and selenothiobiuret [III] were carried out at the Hartree-Fock (HF) and MP2 levels. The molecular geometries of these species were fully optimized at the HF level and characterized by analysis of the harmonic vibrational frequencies using a split-valence triple-zeta basis set augmented by a set ofd polarization functions on heavy atoms andp polarization functions on hydrogen atoms [TZP(d, p)]. The total energies of the HF-optimized structures were calculated at the MP2 (frozen core) level using a larger TZP (2df, 2pd) basis set. The potential energy searches revealed a total of 11 minimum-energy conformers (assigned astrans-trans, trans-cis, cis-trans, andcis-cis) and seven transition-state species for the title molecules. The two predicted conformers for diselenobiuret (Ia=trans-trans andIc=cis-cis) are characterized byC ₂ and the third byC _s symmetry. For selenothiobiuret two forms (IIIa=trans-trans andIIId=cis-cis) possessC ₁ and two (IIIb=trans-cis andIIIc=cis-trans) possessC _s symmetries, respectively. For selenobiuret, four formsIIa=trans-trans (C₁),IIb=trans-cis (C _s),IIc=cis-trans (C ₁), andIId=cis-cis (C₁), were obtained as a result of gradient optimization. Comparison of the relative energies for the considered species indicated that thecis-trans forms are the most stable conformations for all three systems at both the HF and MP2 levels of theory.     

Facile one-pot synthesis of 5-aryl/heterylidene-2-(2-hydroxyethyl- and 3-hydroxypropylamino)-thiazol-4-ones via catalytic aminolysis

A multicomponent synthetic approach for 5-aryl/heterylidene-2-(2-hydroxyethylamino)- and 2-(3-hydroxypropylamino)-thiazol-4-ones starting from 2-thioxothiazolidin-4-one or 2-methylsulfanylthiazol-4-one was developed. The proposed method involves simultaneous aminolysis of 2-thioxo- or 2-methylsulfanyl groups and Knoevenagel condensation with (hetero)aromatic aldehydes using 2-aminoethanol or 3-aminopropan-1-ol as catalysts. Side-chain prototropic amino–imino tautomerism was observed for target 5-ylidene-2-alkylaminothiazol-4-ones.     

Hydrotalcite-derived Co-containing mixed metal oxide catalysts for methanol incineration

The Co–Mg–Al mixed metal oxides were prepared by calcination of co-precipitated hydrotalcite-like precursors at various temperatures (600–800 °C), characterised with respect to chemical (AAS) and phase (XRD) composition, textural parameters (BET), form and aggregation of cobalt species (UV–vis-DRS) and their redox properties (H₂-TPR, cyclic voltammetry). Moreover, the process of thermal decomposition of hydrotalcite-like materials to mixed metal oxide systems was studied by thermogravimetric method combined with the analysis of gaseous decomposition products by mass spectrometry. Calcined hydrotalcite-like materials were tested as catalysts for methanol incineration. Catalytic performance of the oxides depended on cobalt content, Mg/Al ratio and calcination temperature. The catalysts with lower cobalt content, higher Mg/Al ratio and calcined at lower temperatures (600 or 700 °C) were less effective in the process of methanol incineration. In a series of the studied catalysts, the best results, with respect to high catalytic activity and selectivity to CO₂, were obtained for the mixed oxide with Co:Mg:Al molar ratio of 10:57:33 calcined at 800 °C. High activity of this catalyst was likely connected with the presence of a Co–Mg–Al spinel-type phases, containing easy reducible Co³⁺ cations, formed during high-temperature treatment of the hydrotalcite-like precursor.     

New thermoplastic poly(carbonate-urethane)s based on chain extenders with sulfur atoms

New thermoplastic segmented polyurethanes were obtained by a one-step melt polyaddition using 40, 50 and 60 mol% poly(hexane-1,6-diyl carbonate) diol of \(\bar{M}_{n} = 860\) g mol^?1, 1,1′-methanediylbis(4-isocyanatobenzene) and 2,2′-[sulfanediylbis(benzene-1,4-diyloxy)]diethanol, 2,2′-[oxybis(benzene-1,4-diylsulfanediyl)]diethanol or 2,2′-[sulfanediylbis(benzene-1,4-diylsulfanediyl)]diethanol as a chain extender. FTIR, atomic force microscopy, differential scanning calorimetry and thermogravimetry were used to examine the polyurethanes’ structure and thermal properties. Moreover, their Shore A/D hardness, tensile, adhesive and optical attributes were determined. They were transparent high-molar-mass materials showing good tensile strength (up to 51.9 MPa). The polyurethanes exhibited improved adhesion to copper taking into consideration that of conventional ones, and middle or high refractive index values (1.57–1.60), and both these parameters increased with an increase of the content of sulfur atoms in the polyurethane chain. The newly obtained polyurethanes can be considered as materials for numerous medical and optical appliances.     

Solvent extraction of Cu,Mo, V,and U from leach solutions of copper ore and flotation tailings

A micro-cloud point extraction method was discussed for preconcentration and spectrophotometric quantification of U(VI). The method depends on complex formation between U(VI) and 2-(4-sulphophenyloazo)-1,8-dihydroxy-3,6-naphtalenedisulphonic acid (SPADNS) at pH 7.0 and subsequent extraction of the complex in a mixed surfactant medium (cethyltrimethyl ammonium bromide and Triton X-114). The separation was carried out in the presence of 1% Na₂SO₄ at room temperature. The calibration curve was linear up to 3000 µg L^?1. The enrichment factor, detection limit and precision were 16.0, 1.05 µg L^?1, and 2.3%, respectively. The method was employed for the determination of U(VI) in real samples with different matrices.     

Preparation and photocatalytic properties of silica-supported fine CdS powders

Summary Silica-supported cadmium sulfide, highly active in hydrogen photogeneration from water-methanol-KOH solution, was prepared by sulfidation of Cd²⁺-impregnated SiO₂. The samples consisted of colloidal-size hexagonal crystallites of CdS on amorphous SiO₂. A blue shift of a light absorption edge was observed for the samples with lower CdS content.

---

Herstellung und photokatalytische Aktivität von feinen CdS-Pulvern auf SiO₂

Zusammenfassung Es wurde Cadmiumsulfid auf Kieselgel durch Sulfidierung von Cd²⁺-imprägniertem SiO₂ hergestellt, das eine außerordentliche Aktivität bei der Wasserstoff-Photogenerierung aus Wasser-Methanol-KOH-Lösungen zeigte. Der Katalysator bestand aus hexagonalen CdS-Kristalliten von kolloidalen Ausmaßen auf amorphem SiO₂. An Proben mit geringerem CdS-Gehalt wurde eine Blauverschiebung der Lichtabsorption an der Absorptionskante beobachtet.

     

Effect of Elicitation with Iron Chelate and Sodium Metasilicate on Phenolic Compounds in Legume Sprouts

Seven-day-old sprouts of fenugreek (Trigonella foenum-graecum L.), lentil (Lens culinaris L.), and alfalfa (Medicago sativa L.) were studied. The legume seeds and then sprouts were soaked each day for 30 min during 6 days with water (control) or mixture of Fe-EDTA and sodium silicate (Optysil), or sodium silicate (Na-Sil) alone. Germination and sprout growing was carried out at temperature 20 ± 2 °C in 16/8 h (day/night) conditions. Phenolic compounds (free, ester, and glycosides) content were determined by HPLC-ESI-MS/MS using a multiple reaction monitoring of selected ions. Flavonoids and phenolic acids were released from their esters after acid hydrolysis and from glycosides by alkaline hydrolysis. The presence and high content of (−)-epicatechin (EC) in fenugreek sprouts was demonstrated for the first time. Applied elicitors decreased the level of free EC in fenugreek and alfalfa sprouts but enhanced the content of its esters. Besides, elicitors decreased the content of quercetin glycosides in lentil and fenugreek sprouts but increased the content of quercetin and apigenin glycosides in alfalfa sprouts. The applied elicitors decreased the glycoside levels of most phenolic acids in lentil and p-hydroxybenzoic acid in fenugreek, while they increased the content of this acid in alfalfa. The mixture of iron chelate and sodium silicate had less effect on changes in flavonoid and phenolic acid content in legume sprouts than silicate alone. In general, the used elicitors increased the content of total phenolic compounds in fenugreek and alfalfa sprouts and decreased the content in lentil sprouts. Among the evaluated elicitors, Optysil seems to be worth recommending due to the presence of iron chelate, which can be used to enrich sprouts with this element.     

Peptide Charge Derivatization as a Tool for Early Detection of Preeclampsia by Mass Spectrometry—A Comparison with the ELISA Test

Early detection of any preeclampsia biomarkers may lower the risk of mortality, both for a mother and a child. Our study focuses on techniques for preeclampsia biomarker identification by comparing the results of a method using liquid chromatography mass spectrometry in multiple reaction monitoring mode (LC-MS/MS) with those by the enzyme-linked immunosorbent assay (ELISA) test, as well as by comparing the obtained results with clinical data. In the proposed LC-MS/MS method a tryptic digest peptide charge derivatization strategy was used as a tool for sensitive detection of podocin, i.e., a previously discovered preeclampsia biomarker present in urine samples from pregnant women. Urine samples from pregnant women with diagnosed preeclampsia were collected at different stages of pregnancy and from healthy subjects, and then were analyzed by ELISA test and the proposed method with LC-MS/MS. Charge derivatization of the ε amino group of C-terminal lysine residues in tryptic digests by 2,4,6-triphenylpyrylium salt was performed to increase the ionization efficiency in the LC-MS/MS mode. Podocin was identified at the early stage of pregnancy, while its detection using an ELISA test was not possible. The protocol for urine sample preparation was optimized. Our results show that the proposed method by LC-MS/MS in combination with peptide charge derivatization, provides an ultrasensitive tool for diagnosis of preeclampsia, and provides earlier detection than a clinical diagnosis or ELISA test. The proposed solution may revolutionize medical diagnostics.