Exploring the Interplay between Drug Release and Targeting of Lipid-Like Polymer Nanoparticles Loaded with Doxorubicin

Targeted delivery of doxorubicin still poses a challenge with regards to the quantities reaching the target site as well as the specificity of the uptake. In the present approach, two colloidal nanocarrier systems, NanoCore-6.4 and NanoCore-7.4, loaded with doxorubicin and characterized by different drug release behaviors were evaluated in vitro and in vivo. The nanoparticles utilize a specific surface design to modulate the lipid corona by attracting blood-borne apolipoproteins involved in the endogenous transport of chylomicrons across the blood–brain barrier. When applying this strategy, the fine balance between drug release and carrier accumulation is responsible for targeted delivery. Drug release experiments in an aqueous medium resulted in a difference in drug release of approximately 20%, while a 10% difference was found in human serum. This difference affected the partitioning of doxorubicin in human blood and was reflected by the outcome of the pharmacokinetic study in rats. For the fast-releasing formulation NanoCore-6.4, the AUC_0→1h was significantly lower (2999.1 ng × h/mL) than the one of NanoCore-7.4 (3589.5 ng × h/mL). A compartmental analysis using the physiologically-based nanocarrier biopharmaceutics model indicated a significant difference in the release behavior and targeting capability. A fraction of approximately 7.310–7.615% of NanoCore-7.4 was available for drug targeting, while for NanoCore-6.4 only 5.740–6.057% of the injected doxorubicin was accumulated. Although the targeting capabilities indicate bioequivalent behavior, they provide evidence for the quality-by-design approach followed in formulation development.     

Approximate Atomic Green Functions

In atomic and many-particle physics, Green functions often occur as propagators to formally represent the (integration over the) complete spectrum of the underlying Hamiltonian. However, while these functions are very crucial to describing many second- and higher-order perturbation processes, they have hardly been considered and classified for complex atoms. Here, we show how relativistic (many-electron) Green functions can be approximated and systematically improved for few- and many-electron atoms and ions. The representation of these functions is based on classes of virtual excitations, or so-called excitation schemes, with regard to given bound-state reference configurations, and by applying a multi-configuration Dirac-Hartree-Fock expansion of all atomic states involved. A first implementation of these approximate Green functions has been realized in the framework of Jac, the Jena Atomic Calculator, and will facilitate the study of various multi-photon and/or multiple electron (emission) processes.     

Design and Synthesis of New 5-aryl-4-Arylethynyl-1H-1,2,3-triazoles with Valuable Photophysical and Biological Properties

Cu-catalyzed 1,3-dipolar cycloaddition of methyl 2-azidoacetate to iodobuta-1,3-diynes and subsequent Suzuki-Miyaura cross-coupling were used to synthesize new triazoles derivatives: 5-aryl-4-arylethynyl-1H-1,2,3-triazoles. Investigation of their optical properties by using UV absorption and fluorescence emission spectroscopies revealed that all molecules possess fluorescence properties with the values of the Stokes shift more than 100 nm. The photophysical behavior of the two most promising triazoles in polar and non-polar solvents was also studied.     

Bending of DNA by asymmetric charge neutralization: all-atom energy simulations

DNA dodecamers of the alternating d(CG).d(CG) sequence with six phosphate groups either charge-neutralized or substituted by neutral methylphosphonates across the major or minor groove have been subjected to energy minimization to determine the conformational effect of the asymmetric elimination of phosphate charge. We report bending angles, directions of bending, and detailed structural characteristics such as groove widths and local base-pair parameters. Our principal results are that charge neutralization on one face of the DNA induces significant bending toward the neutralized face, in agreement with theoretical predictions on a simplified model and experimental data on a similar base-pair sequence, and that the DNA conformation averaged over all stereospecific methylphosphonate substitutions is nearly the same as the conformation produced by charge neutralization of the phosphates. Individual isomers, however, cover a wide range of structures, with the magnitude and direction of overall bending sensitive to the precise stereochemical pattern of neutralization. Our simulation does not explicitly contain counterions, and the results therefore suggest that counterions can influence DNA structure by neutralizing the phosphate charge. These data provide new hints into the molecular mechanisms which underlie the deformations of DNA structure induced by the binding of positively charged proteins and other tightly associated cationic species.     

Diastereoselective synthesis of 3-tert-butyl-3,4-dihydropyrazolo[5,1-c][1,2,4]triazine-3,4-diyl dicarboxylates

The reactions of 3-tert-butyl-7-R¹-8-R²-pyrazolo[5,1-c][1,2,4]triazines (R¹ = H, Br; R² = Me, n-Bu) with N-bromosuccinimide in the presence of R³CO₂H (R³ = Me, t-Bu, Ph) afforded novel diastereomerically pure 3-tert-butyl-7-R¹-8-R²-3,4-dihydropyrazolo[5,1-c][1,2,4]triazine-3,4-diyl dicarboxylates. The structures of the isolated products were established on the basis of IR, ¹H, ¹³C, 2D NOESY NMR, high resolution mass spectrometry and X-ray single-crystal analysis. The steric and mechanistic origins of the observed regio- and stereoselectivity were also discussed.     

Predicting absorption spectra of silver-ligand complexes

The detailed structures of most of ligand-stabilized metal nanoclusters (NCs) remain unknown due to the absence of crystal structure data for them. In such a situation, quantum-chemical modeling is of particular interest. We compared the performance of different theoretical methods of geometry optimization and absorption spectra calculation for silver-thiolate complexes. We showed that the absorption spectra calculated with the ADC(2) method were consistent with the spectra obtained with CC2 method. Three DFT functionals (B3LYP, CAM-B3LYP, and M06-2X) failed to reproduce the CC2 absorption spectra of the silver-thiolate complexes.     

Sulfonated and sulfoacylated poly(styrene-divinylbenzene) copolymers as packing materials for cation chromatography

Three different types of cation exchangers were produced from four basic poly(styrene-divinylbenzene) substrates with different properties. Porous PS-DVB resin beads were functionalized by sulfonation and sulfoacylation under various conditions to produce sulfonated resins with exchange capacities of 0.03-1.80 mM g(-1). The matrix with 50% of cross-linking is most suitable for updating by the proposed technique. Sulfuric and chlorosulfonic acids were used as the reagents for sulfonation. The sulfonating conditions, capacities, and the technique of the synthesis are given. The effects of parameters of the sulfonation reaction and the composition of the reactionary mixture on ion-exchange capacity of the sorbents were investigated. Selectivity and efficiency of the separation of some inorganic cations and derivatives of amines and hydrazines on the resins obtained are compared by ion chromatography with conductometric detection. As a result, the sulfoacylated resin was proved more efficient for the separation of these analytes. The resolution of the analytes strongly depends on the degree of functionalization. The best performance about 19,000 plates m(-1) was obtained using the sulfopropionylated beads with an ion-exchange capacity of 0.3 mM g(-1). The prepared sulfoacylated cation exchanger was compared with the commercially available Dionex CS-12 packing material. It was found that the separation of alkaline ions and 1,1-dimethylhydrazine (UDMH) were much better that those for the commercial material.     

Tuning the Gate‐Opening Pressure in a Switching pcu Coordination Network,X‐pcu‐5‐Zn,by Pillar‐Ligand Substitution

Coordination networks that reversibly switch between closed and open phases are of topical interest since their stepped isotherms can offer higher working capacities for gas‐storage applications than the related rigid porous coordination networks. To be of practical utility, the pressures at which switching occurs, the gate‐opening and gate‐closing pressures, must lie between the storage and delivery pressures. Here we study the effect of linker substitution to fine‐tune gate‐opening and gate‐closing pressure. Specifically, three variants of a previously reported pcu ‐topology MOF, X‐pcu‐5‐Zn , have been prepared: X‐pcu‐6‐Zn , 6 =1,2‐bis(4‐pyridyl)ethane (bpe), X‐pcu‐7‐Zn , 7 =1,2‐bis(4‐pyridyl)acetylene (bpa), and X‐pcu‐8‐Zn , 8 =4,4′‐azopyridine (apy). Each exhibited switching isotherms but at different gate‐opening pressures. The N₂, CO₂, C₂H₂, and C₂H₄ adsorption isotherms consistently indicated that the most flexible dipyridyl organic linker, 6 , afforded lower gate‐opening and gate‐closing pressures. This simple design principle enables a rational control of the switching behavior in adsorbent materials.     

Hexacoordinate triphenylantimony(V) complex with tridentate bis-(3,5-di-tert-butyl-phenolate-2-yl)-amine ligand: Synthesis,NMR and X-ray study

The oxidative addition reaction of 4,6-di-tert-butyl-N-(2-hydroxy-3,5-di-tert-butyl-phenyl)-o-iminobenzoquinone (IBQ) to triphenylantimony(III) proceeds with the migration of hydroxyl-proton to a nitrogen atom to form tridentate O,N,O′-coordinated bis-(3,5-di-tert-butyl-phenolate-2-yl)-amine ligand. In accordance with ¹H, ¹³C, DEPT NMR data, the new hexacoordinate complex [bis-(3,5-di-tert-butyl-phenolate-2-yl)-amine]triphenylantimony(V), [(AP-AP)H]SbPh₃ (1) in solution has a C_s symmetry plane leading to the equivalence of two O,N-chelate o-aminophenolato moieties. The molecular structure of 1 · acetone was studied by a single-crystal X-ray. Compound 1 was found to be air-stable both in solid and in solution. Its oxidation by PbO₂ leads to paramagnetic [4,6-di-tert-butyl-N-(3,5-di-tert-butyl-phenolate-2-yl)-o-iminobenzosemiquinolato]triphenylantimony(V), [(AP-ISQ)]SbPh₃ (2).