Structures and synthesis of framework Rb and Cs uranyl arsenates and their relationships with their phosphate analogues

Two hydrated uranyl arsenates, Cs₂(UO₂)[(UO₂)(AsO₄)]₄(H₂O)₂ (CsUAs) and Rb₂(UO₂)[(UO₂)(AsO₄)]₄(H₂O)_4.5 (RbUAs), were synthesized by hydrothermal methods. Intensity data were collected at room temperature using MoKα radiation and a CCD-based area detector. The crystal structure of RbUAs was solved by direct methods, whereas the structure model of the phosphate Cs₂(UO₂)[(UO₂)(PO₄)]₄(H₂O)₂ was used for CsUAs; both were refined by full-matrix least-squares techniques on the basis of F² to agreement indices (CsUAs, RbUAs) wR₂=0.061,0.041, for all data, and R₁=0.032,0.021, calculated for 5098, 4991 unique observed reflections (|F_o|>4σ_F), respectively. The compound CsUAs is orthorhombic, space group Cmc2₁, Z=4, a=15.157(2), b=14.079(2), c=13.439(2) Å, V=2867.9(1) Å³. RbUAs is monoclinic, space group C2/m, Z=4, a=13.4619(4), b=15.8463(5), c=14.0068(4) Å, β=92.311(1)°, V=2985.52(2) Å³. The structures consist of sheets of arsenate tetrahedra and uranyl pentagonal bipyramids, with composition [(UO₂)(AsO₄)]⁻, that are topologically identical to the uranyl silicate sheets in uranophane-beta. These sheets are connected by a uranyl pentagonal bipyramid in the interlayer that shares corners with two arsenate tetrahedra on each of two adjacent sheets and whose fifth equatorial vertex is an H₂O group, resulting in an open framework with alkali metal cations in the larger cavities of the structures. CsUAs is isostructural with its phosphate analogue, and has two Cs atoms and a H₂O group in its structural cavities. RbUAs is not isostructural with its phosphate analogue, although it has a homeotypic framework. Its structural cavities are occupied by three Rb atoms and four H₂O groups; one Rb position and three of the interstitial H₂O groups are half-occupied. The partial occupancies of these positions probably result from the accommodation of the larger As atoms (relative to P) in the framework and resultant larger cavities.     

Three-photon near-threshold photoionization dynamics of isooctane

The electron survival probability following three-photon (9.3 eV total) near-threshold photoionization of neat isooctane is measured with sub-50 fs time resolution. The measured dynamics are nonexponential in time and are well described by a diffusion-controlled electron-cation recombination model. Excitation-power-dependent studies indicate that the unperturbed three-photon threshold ionization is only observed for pump irradiance below 0.5 TW cm2. At excitation fields above this level, the signal is no longer cubic in the excitation irradiance, and the observed electron survival probability dramatically changes, decaying as a single exponential in time.     

Stamp collapse in soft lithography

We have studied the so-called roof collapse in soft lithography. Roof collapse is due to the adhesion between the PDMS stamp and substrate, and it may affect the quality of soft lithography. Our analysis accounts for the interactions of multiple punches and the effect of elastic mismatch between the PDMS stamp and substrate. A scaling law among the stamp modulus, punch height and spacing, and work of adhesion between the stamp and substrate is established. Such a scaling law leads to a simple criterion against the unwanted roof collapse. The present study agrees well with the experimental data.     

Rational materials design of sorbent coatings for explosives: applications with chemical sensors

A series of chemoselective polymers had been designed and synthesized to enhance the sorption properties of polymer coated chemical sensors for polynitroaromatic analytes. To evaluate the effectiveness of the chemoselective coatings, a polynitroaromatic vapor test bed was utilized to challenge polymer coated surface acoustic wave (SAW) devices with different explosive vapors. Dinitrotoluene detection limits were determined to be in the <100 parts per trillion ranges. ATR-FTIR studies were used to determine the nature of the polymer-polynitroaromatic analyte interactions, and confirm the presence of hydrogen-bonding between polymer pendant groups and the nitro functional groups of polynitroaromatic explosive materials.     

Reaction titration: a convenient method for titering reactive hydride agents (Red-Al, LiAlH4, DIBALH, L-Selectride, NaH, and KH) by No-D NMR spectroscopy

The concentration of reactive metal hydride (Met-H) reducing agents can be determined (in < or = 20 min) using No-D NMR spectroscopy. The method involves (i) reacting Met-H with an excess of p-methoxybenzaldehyde, (ii) quenching with excess acetic acid, (iii) recording the No-D NMR spectrum of this homogeneous mixture, and (iv) deducing the concentration of Met-H from the % conversion (as measured by integration). By a conceptually related method, the titer of the basic alkali metal hydrides KH and NaH can also be determined.     

The stereoselective synthesis of aziridine analogues of diaminopimelic acid (DAP) and their interaction with dap epimerase

Aziridine analogues of diaminopimelic acid (DAP) have been prepared stereoselectively for the first time and evaluated as inhibitors of DAP epimerase. (2R,3S,3'S)-3-(3'-Aminopropane)aziridine-2,3'-dicarboxylate was synthesised and shown to be a reversible inhibitor of DAP epimerase with an IC(50) value of 2.88 mM. (2S,4S)- and (2S,4R)-2-(4-Amino-4-carboxybutyl)aziridine-2-carboxylic acid (ll-azi-DAP and dl-azi-DAP ) were made as pure diastereomers, and both were shown to be irreversible inhibitors of DAP epimerase. ll-Azi-DAP selectively binds to Cys-73 of the enzyme active site whereas dl-azi-DAP binds to Cys-217 via attack of sulfhydryl on the methylene of the inhibitor aziridine ring. These observations are consistent with the two base mechanism proposed for the epimerization of ll-DAP and meso-DAP by DAP epimerase.     

Efficient low-temperature oxidation of carbon-cluster anions by SO2

Carbon-cluster anions, CN-, are very reactive toward SO2 (sticking probability of 0.012 +/- 0.005 for C27- at 25 degrees C), in contrast to their inertness toward other common atmospheric gases and pollutants. In flow reactor experiments at ambient temperature and near atmospheric pressure, primary adsorption of SO2 by the carbon cluster anions, N = 4-60, yields CNSO2- or CN-1S-. The inferred elimination of neutral CO2 is also detected as meta-stable decay in collision-induced dissociation. At higher temperatures, the reaction of SO2 with nascent carbon clusters yields CN-1SO- as well as undetected CO. The size-dependent initial reactivity reflects the previously established structural transitions (i.e., from chain to cyclic to cage structures). Such carbon clusters are formed in sooting flames and may act as nuclei for the formation of primary soot particles and serve as models for the local structural features of active soot particle sites for black-carbon soot. The facile generation of reactive carbon-sulfide and -sulfinate units may therefore have implications for understanding the health and environmental effects attributed to the coincidence of soot and SO2.     

Application of solid phase peptide synthesis to engineering PEO–peptide block copolymers for drug delivery

This work describes a simple, versatile solid-phase peptide-synthesis (SPPS) method for preparing micelle-forming poly(ethylene oxide)-block-peptide block copolymers for drug delivery. To demonstrate its utility, this SPPS method was used to construct two series of micelle-forming block copolymers (one of constant core-composition and variable length; the other of constant core length and variable composition). The block copolymers were then used to study in detail the effect of size and composition on micellization. The various block copolymers were prepared by a combination of SPPS for the peptide block, followed by solution–phase conjugation of the peptide block with a proprionic acid derivative of poly(ethylene oxide) (PEO) to form the PEO-b-peptide block copolymer. The composition of each block component was characterized by mass spectrometry (MALDI and ES-MS). Block copolymer compositions were characterized by ¹H NMR. All the block copolymers were found to form micelles as judged by transmission electron microscopy (TEM) and light scattering analysis. To demonstrate their potential as drug delivery systems, micelles prepared from one member of the PEO-b-peptide block copolymer series were physically loaded with the anticancer drug doxorubicin (DOX). Micelle static and dynamic stability were found to correlate strongly with micelle core length. In contrast, these same micellization properties appear to be a complex function of core composition, and no clear trends could be identified from among the set of compositionally varying, fixed length block copolymer micelles. We conclude that SPPS can be used to construct biocompatible block copolymers with well-defined core lengths and compositions, which in turn can be used to study and to tailor the behavior of block copolymer micelles.     

Site-specific cleavage of human telomerase RNA using PNA-neocuproine.Zn(II) derivatives

Here we report the synthesis of a novel PNA based neocuproine.Zn RNA cleaving agent; we demonstrate that such agents sequence specifically cleave a synthetic RNA target and in particular the RNA component of human telomerase.