Templating and selection in the formation of macrocycles containing [[P(micro-NtBu)(2)](micro-NH)](n) frameworks: observation of halide ion coordination

Amination of [ClP(micro-NtBu)](2) (1) using NH(3) in THF gives the cyclophospha(III)zane dimer [H(2)NP(micro-NtBu)](2) (2), in good yield. (31)P NMR spectroscopic studies of the reaction of 1 with 2 in THF/Et(3)N show that almost quantitative formation of the cyclic tetramer [[P(micro-NtBu)](2)(micro-NH)](4) (3) occurs. The remarkable selectivity of this reaction can (in part) be attributed to pre-organisation of 1 and 2, which prefer cis arrangements in the solid state and solution. The macrocycle 3 can be isolated in yields of 58-67 % using various reaction scales. The isolation of the major by-product of the reaction (ca. 0.5-1 % of samples of 3), the pentameric, host-guest complex [[P(micro-NtBu)(2)](2)(micro-NH)](5)(HCl).2 THF] (4.2 THF), gives a strong indication of the mechanism involved. In situ (31)P NMR spectroscopic studies support a stepwise condensation mechanism in which Cl(-) ions play an important role in templating and selection of 3 and 4. Amplification of the pentameric arrangement occurs in the presence of excess LiX (X=Cl, Br, I). In addition, the cyclisation reaction is solvent- and anion-dependent. The X-ray structures of 2 and 4.2 THF are reported.     

Pyridine N-alkylation by lithium, magnesium, and zinc alkyl reagents: synthetic, structural, and mechanistic studies on the bis(imino)pyridine system

The 2,6-bis(alpha-iminoalkyl)pyridines 2,6-[ArNC(CR(3))](2)C(5)H(3)N [R = H, D; Ar = 2,6-i-Pr(2)C(6)H(3) (DIPP), 2,6-Me(2)C(6)H(3) (DMP)] react with MeLi in Et(2)O to give a binary mixture of products: the pyridine N-methylated species 2,6-[ArNC(CR(3))](2)C(5)H(3)N(Me)Li(OEt(2)) and the deprotonated/dedeuterated species 2-[ArNC(CR(3))],6-[ArNC(=CR(2))]C(5)H(3)NLi(OEt(2)). For R = D, the product ratio is 2:1 in favor of the N-methylated product, while, for R = H, the deprotonated product is favored by 5:1, increasing to 8:1 in toluene solvent. Warming solutions of the N-methylated species leads to clean conversion to the thermodynamically preferred deprotonated species. Crossover experiments show that MeLi is re-formed and dissociates from the terdentate ligand before deprotonating the ketimine methyl unit. For MgR(2) (R = Et, i-Pr) and ZnR(2) (R = Et) reagents, N-alkylation products are formed exclusively, but derivatives containing bulky aryl substituents are found to undergo further rearrangement to 2-alkylated species, arising by migration of the alkyl group of the N-alkyl moiety to the adjacent ring carbon atom. The reversibility of the N-alkylation process has been probed using deuterio-labeled Mg alkyl reagents and mixed alkyl zinc species. A cationic zinc derivative is shown to undergo "reverse" alkyl migration, from the heterocycle nitrogen atom to the zinc center. EPR spectroscopy reveals a paramagnetic intermediate in which the unpaired electron is delocalized over the heterocycle and di-imine moieties of the ligand, indicating that the N-alkylation reactions proceed via single electron-transfer processes.     

Stereoselective synthesis of (8R,8aS)-8-methylhexahydroindolizin-5-one

Catalytic hydrogenation of dihydroindolizidinone occurred preferentially from the endo-face giving rapid entry to (8R,8aS)-8-methylhexahydroindolizin-5-one, a key intermediate in the synthesis of 5,8-disubstituted indolizidines and deoxypumiliotoxin 251H. The selectivity could be improved further by diimide reduction though this also resulted in some oxidation of the alkene to the diene. The basis of the unusual stereoselectivity in the diimide reduction is believed to be stereoelectronic in origin.     

Reactions of organoboranes and 2-lithio-2-alkyl-1,3-benzodithioles. A new,improved synthesis of ketones

Reactions of trialkylboranes with 2-lithio-2-alkyl-1,3-benzodithioles followed by oxidation give ketones in good yields. This method is far less subject to steric hindrance than the analogous reactions using anions derived from bis(phenylthio)alkanes.     

Eu(III)-cyclen-phen conjugate as a luminescent copper sensor: the formation of mixed polymetallic macrocyclic complexes in water

The cationic cyclen based Eu(III)-phen conjugated 1.Eu was synthesised as a chemosensor for Cu(II), where the recognition in water at pH 7.4 gave rise to quenching of the Eu(III) luminescence and the formation of tetranuclear polymetallic Cu(II)-Eu(III) macrocyclic complexes in solution where Cu(II) was bound by three 1.Eu conjugates.     

Ruminant pregastric lipases: experimental evidence of their potential as industrial catalysts in food technology

The historical importance of pregastric enzymes in cheese-making is reviewed and the potential for extending their use is discussed in terms of requiring an understanding of their physicochemical parameters. Commericial extracts from the tongues and epiglotti of suckling lambs and calves and adult goats have been processed to yield partially purified samples of the primary pregastric lipase (PGL). The N-terminal sequence and molecular weight of lamb PGL have been determined.

The activity of lamb and goat PGLs against tributyrin has been determined over a range of pH and temperature values. Optimum conditions were pH 6.4, 43°C, and pH 6.0, 52°C, for lamb and goat PGL respectively. The possible influence of the development of a ruminant multi-chambered stomach on the difference in optimal temperature is discussed. A lengthening of the carboxylic acid chain of homoacid triglycerides causes a decrease in hydrolytic activity of lamb PGL but in all cases only a single free fatty acid was released. Against a series of 4-nitrophenylalkanoate esters, maximum activity was observed against the decanoate ester but, in contrast to hydrolysis of the acetate ester which exhibited full Michaelis-Menten kinetics with increasing substrate concentration, activity against the decanoate ester was restricted to the monomeric substrate. Taurocholate inhibits the activity of lamb PGL at concentrations >8 mM. Values of pK₂ equal to 6.69 and 7.92 respectively have been determined for lamb PGL.

Attempts to interesterify coconut oil and cocoa butter, and tributyrin and tricaprylin, catalysed by calf PGL were unsuccessful, although positive results obtained using Candida cylindracea encourage further investigation of alternative methods for immobilizing the PGL. Finally, anhydrous milk fat has been hydrolysed by calf, lamb and goat PGLs and the differences in relative amounts of released free fatty acids have been used to explain the differences in taste which arise when Parmesan cheese is produced using different sources of PGL.     

Unexpected stability of aryl beta-N-acetylneuraminides in neutral solution: biological implications for sialyl transfer reactions

A reagent panel comprised of seven aryl beta-D-N-acetylneuraminides was synthesized and then used to probe the mechanisms of nonenzymatic hydrolysis. These reactions proceeded via four independent pathways: (1) acid-catalyzed hydrolysis of the neutral molecule; (2) acid-catalyzed hydrolysis of the anionic form, or its kinetic equivalent spontaneous hydrolysis of the neutral form; (3) spontaneous hydrolysis of the anionic form; and (4) a base-promoted pathway. The pH-independent spontaneous hydrolysis of 4-nitrophenyl alpha-D-N-acetylneuraminide (5) occurs at a rate that is over 100 times faster than that of the corresponding reaction of 4-nitrophenyl beta-D-N-acetylneuraminide (4a). Spontaneous hydrolyses of four aryl beta-D-N-acetylneuraminides displayed a beta(lg) value of -1.24 +/- 0.16 (pH = 8.1, T = 100 degrees C), and at a pH value of 1.0 (50 degrees C), all seven panel members gave a beta(lg) value of 0.14 +/- 0.08. The aqueous ethanolyses of 4a and 5 gave similar products and displayed sensitivity parameters (m) in a standard Winstein-Grunwald analysis of -0.04 +/- 0.01 and +0.23 +/- 0.02, respectively. These results, plus the activation parameters calculated for the spontaneous hydrolyses of the anionic forms of 5 (DeltaH() = 116 +/- 2 kJ mol(-1) and DeltaS = 27 +/- 4 J mol(-1) K(-1)) and 4a (DeltaH = 138 +/- 3 kJ mol(-1) and DeltaS = 59 +/- 8 J mol(-1) K(-1)), are inconsistent with anomeric carboxylate assistance occurring during the hydrolysis reactions, and the likely cause for the enhanced reactivity of 5 in comparison to that of 4a is an increase in ground-state steric strain.     

Squeezing the [Cu-OH...H2O-Cu]3+ bridge by cryptate encapsulation

Treatment of cryptand L(1) with Cu(II) generates a H3O2(-)-bridged dicopper(II) cryptate, 2, where the guest anion has responded to steric constraint by a significant shortening of the O-O distance to 2.325(9) A; computational optimization at the B3LYP/6-31(d) level suggests that the bridging O-H...O H-bond is bent (approximately 157 degrees) but that the barrier to interchange of the bridging H atom is low (<4 kJ mol(-1)). This cryptate, rather than the [Cu2L(1)muCN]3+ species recently claimed to derive from cleavage of the C-C bond of the solvent, is the product of acetonitrile recrystallization of the initially formed reaction product, 1.     

Automated multi-attribute method sample preparation using high-throughput buffer exchange tips

Rationale

The multi-attribute method (MAM) has become a valuable mass spectrometry (MS)-based tool that can identify and quantify the site-specific product attributes and purity information for biotherapeutics such as monoclonal antibodies (mAbs) and fusion molecules in recent years. As we expand the use of the MAM at various stages of drug development, it is critical to enhance the sample preparation throughput without additional chemical modifications and variability.

Methods

In this study, a fully automated MAM sample preparation protocol is presented, where rapid desalting in less than 15 minutes is achieved using miniaturized size-exclusion chromatography columns in pipette tips on an automated liquid handler. The peptide samples were analyzed using an electrospray ionization (ESI) orbitrap mass spectrometer coupled to an ultra-high-performance liquid chromatography (UHPLC) system with a dual column switching system.

Results

No significant change was observed in product attributes and their quantities compared with manual, low-artifact sample preparation. The sample recovery using the buffer exchange tips was greatly enhanced over the manual spin cartridges while still demonstrating excellent reproducibility for a wide variety of starting sample concentrations. Unlike a plate desalting system, the individual columns provide flexibility in the number of samples prepared at a time and sample locations within plates.

Conclusions

This automated protocol enables the preparation of up to 96 samples with less “at-bench” time than the manual preparation of a smaller batch of samples, thereby greatly facilitating support of process development and the use of the MAM in quality control.

     

Fluorinations with potassium tetrafluorocobaltate(III) Part VII. Further investigations on the fluorination of pyridine

The product from the fluorination of pyridine by KCoF₄ at ca. 220° contains eleven fluoropyridines, two fluoro-2-azahex-enes, three azahexa- dienes, and two fluoro-N-methylpyrrolidines, besides an azacyclohexa-1,3- diene. Four products were isolated from a fluorination of pyridine by CoF₃ at ca. 150°, a 2-azahexene, two N-methylpyrrolidines, and 4H-nona- fluoropiperidine.