Pretransitional electro-optic response of 6CB liquid crystal in the isotropic phase

In this work, the electro-optic response of a 6CB liquid crystal layer is studied using a sensitive differential technique. The layer is held at a temperature just above the nematic to isotropic phase transition. Transverse magnetic (p) polarized light incident on the cell is coupled to guided modes in the liquid crystal layer using prism coupling. The modes manifest themselves as sharp dips in the reflectivity as the angle of incidence is scanned. When a low frequency sinusoidal voltage is applied to the cell, the resonant mode shapes and excitation angles are altered at a frequency which is twice that of the applied field, resulting in a modulation of the reflectivity for a given angle of incidence. By synchronous observation of the modulated signal, a differential signal is recorded. Comparing the data with modelling generated from multilayer optics theory, two effects are then quantified. The first of these is an induced birefringence, varying quadratically with applied voltage, which is well understood and can be expressed in terms of Landau-de Gennes theory. The second is a field induced perturbation in the imaginary part of the optical permittivity, δε_i, which implies a modification of the light scattering properties of the liquid crystal. The measurement of the latter effect is, as far as we know, a novel one, being only made possible by the remarkable sensitivity of the synchronous differential technique.     

A semiclassical reactive flux method for the calculation of condensed phase activated rate constants

A semi classical reactive flux algorithm for calculating thermally activated rate constants is presented which is based on a semi-classical transition state theory due to Chapman, Garrett and Miller [J. Chem. Phys. 63 (1975) 2710]. This reactive flux technique, when combined with the semiclassical TST, enables one to describe dynamical recrossings of the transition state on the same footing as tunneling effects. Most importantly, the method is readily applied to nonlinear multidimensional systems over a wide range of temperatures. It will be shown that the method works very well for a variety of existing models.     

Electrochemical characterization of composite membranes based on crown-ethers intercalated into montmorillonite

Oxyethylene macrocyclic compounds (crown-ethers) act as ligands of intracrystalline cations of certain layered silicates as montmorillonites. Stable intercalation materials are formed which are used to prepare organic-inorganic membranes by encapsulating these intercalation compounds with a poly-butadiene thin coating. Electrochemical Impedance Spectroscopy (EIS) is used to study the resulting composite membranes in contact with aqueous electrolytes. From the impedance plots, the ionic resistance of the membranes is obtained. The thickness of the polybutadiene coating is an important factor determining the ability of ions to pass across the membrane. Marked differences in the ionic resistance are observed as a function of the nature of the interlayer macrocyclic compound. For non-intercalated montmorillonite membranes, the ionic resistance is strongly reduced, whereas for some crown-ether intercalated materials such as 18-crown-6 and dibenzo 24-crown-8, iono-selective membranes are obtained. Concerning the nature of the electrolyte, cations exhibiting greater hydration energies show higher difficulties to pass through the membrane and, consequently, the ionic resistance increases.     

Kinetic model for hydrocarbon-assisted particulate boron combustion

A kinetic model is presented to describe the high temperature (1800 K < T < 3000 K) surface oxidation of particulate boron in a hydrocarbon combustion environment. The model includes a homogeneous gas-phase B/O/H/C oxidation mechanism consisting of 19 chemical species and 58 forward and reverse elementary reactions, multi-component gas-phase diffusion, and a heterogeneous surface oxidation mechanism consisting of ‘elementary’ adsorption and desorption reaction steps. Thermochemical and kinetic parameters for the surface reactions are estimated from available experimental data and/or elementary transition state arguments. The kinetic processes are treated using a generalized kinetics code, with embedded sensitivity analysis, for the combustion of a one-dimensional (particle radius), spherical particle. Model results are presented for the oxidation of a 200 μm boron particle in a JP-4/air mixture at ambient temperatures of 1400 K and 2000 K. These results include temperature and gas-phase species profiles as a function of radial distance and particle burning rates. © 1994 John Wiley & Sons, Inc.     

Analysis of the structure of an amorphous sediment obtained upon decomposition of potassium oxofluroniobate in water

An amorphous sediment was prepared by the decomposition of potassium oxofluoroniobate K_{2 ? x} Nb₄O₃(O, F)₃F in water. For this sediment, the atomic radial distribution function was analyzed with the use of a fragment model, which allows one to interpret expanded coordination spheres as being formed by first several strongest diffusion maxima. These spheres carry the most reliable information on the structure. It is shown that the amorphous sediment consists of the randomly packed Nb(O,F)₆-octahedra with interatomic distances close to those observed in the ordered region in the N-Nb₂O₅ structure. During decomposition in water, the initial K_{2 ? x} Nb₄O₃(O, F)₃F phase loses KF-layers, whereas Nb₆ clusters with metal bonds are destroyed.     

LIDAR mapping of ozone-episode dynamics in Paris and intercomparison with spot analyzers Supplementary material available at http://link.springer.de/journals/apb

Continuous mapping of an ozone episode in Paris in June 1999 has been performed using a differential absorption lidar system. The 2D ozone concentration vertical maps recorded over 33 h at the Champ de Mars are compiled in a video clip that gives access to local photochemical dynamics with unprecedented precision. The lidar data are compared over the whole period with point monitors located at 0-, 50-, and 300-m altitudes on the Eiffel Tower. Very good agreement is found when spatial resolution, acquisition time, and required concentration accuracy are optimized. Sensitivity to these parameters for successful intercomparison in urban areas is discussed. Received: 11 February 2002 / Published online: 14 March 2002     

Application of hydroacoustic radiators for the generation of seismic waves

To excite seismic waves with a high coherence, powerful hydroacoustic radiators placed in a natural reservoir were used. Theoretical estimates and the test data demonstrate a high efficiency of the proposed method of seismic wave excitation. The calculations are in good agreement with the results of measurements. The results of phasing the radiation with the use of two monopole sources separated by a quarter-wave distance are presented. It is shown that the use of the proposed scheme of excitation makes it possible to control the radiation pattern while obtaining a high coherence of seismic waves.     

The limits of hamiltonian structures in three-dimensional elasticity,shells, and rods

Summary This paper uses Hamiltonian structures to study the problem of the limit of three-dimensional (3D) elastic models to shell and rod models. In the case of shells, we show that the Hamiltonian structure for a three-dimensional elastic body converges, in a sense made precise, to that for a shell model described by a one-director Cosserat surface as the thickness goes to zero. We study limiting procedures that give rise to unconstrained as well as constrained Cosserat director models. The case of a rod is also considered and similar convergence results are established, with the limiting model being a geometrically exact director rod model (in the framework developed by Antman, Simo, and coworkers). The resulting model may or may not have constraints, depending on the nature of the constitutive relations and their behavior under the limiting procedure. The closeness of Hamiltonian structures is measured by the closeness of Poisson brackets on certain classes of functions, as well as the Hamiltonians. This provides one way of justifying the dynamic one-director model for shells. Another way of stating the convergence result is that there is an almost-Poisson embedding from the phase space of the shell to the phase space of the 3D elastic body, which implies that, in the sense of Hamiltonian structures, the dynamics of the elastic body is close to that of the shell. The constitutive equations of the 3D model and their behavior as the thickness tends to zero dictates whether the limiting 2D model is a constrained or an unconstrained director model. We apply our theory in the specific case of a 3D Saint Venant-Kirchhoff material andderive the corresponding limiting shell and rod theories. The limiting shell model is an interesting Kirchhoff-like shell model in which the stored energy function is explicitly derived in terms of the shell curvature. For rods, one gets (with an additional inextensibility constraint) a one-director Kirchhoff elastic rod model, which reduces to the well-known Euler elastica if one adds an additional single constraint that the director lines up with the Frenet frame. This paper is dedicated to the memory of Juan C. Simo This paper was solicited by the editors to be part of a volume dedicated to the memory of Juan Simo.     

SECOND BEST TAXES AND QUOTAS IN NITROGEN REGULATION

This paper investigates second best policies to regulate nitrogen leaching. When the policy maker controls the total nitrogen use, an overall tax is superior to an action equivalent overall quota. When the goal is to regulate the expected level of nitrogen leaching, expected profit of a risk neutral farmer is greater under an overall tax than under an overall quota under a reasonable condition. The welfare ranking of action equivalent taxes and quotas for a risk averse farmer is generally ambiguous. In the numerical analyses, overall taxes turned out to be superior to overall quotas with both targets, despite a very high value of absolute risk aversion, 0.01. These results suggest that an overall tax is probably a superior policy to an overall quota to regulate expected total nitrogen use or expected nitrogen leaching for risk neutral and most of risk averse farmers.