Routes to unique palladium A-frame complexes with a bridging fluoro-ligand

Treatment of a toluene solution of [PdMe(2)(Cy(2)PCH(2)PCy(2))](1) with pentafluoropyridine in the presence of traces of water affords the generation of the A-frame complexes [(PdMe)(2){mu-kappa(2)(P,P)Cy(2)PCH(2)PCy(2)}(2)(mu-F)][SiMeF(4)]() and [(PdMe)(2){mu-kappa(2)(P,P)Cy(2)PCH(2)PCy(2)}(2)(mu-F)][OC(5)NF(4)](2b). If the reaction is performed in an NMR tube equipped with a PFA inliner, complex 2b is produced, only. Treatment of 1 with pentafluoropyridine in the presence of an excess water yields the pyridyloxy complex [PdMe(OC(5)NF(4))(Cy(2)PCH(2)PCy(2))](3). Compound [(PdMe)(2){mu-kappa(2)(P,P)Cy(2)PCH(2)PCy(2)}(2)(mu-F)][FHF](2c) bearing a bifluoride anion instead of SiMeF(4)(-) or OC(5)NF(4)(-) can be generated by reaction of 1 with substoichiometric amounts of Et(3)N.3HF. The analogous complex [(PdMe)(2){mu-kappa(2)(P,P)Ph(2)PCH(2)PPh(2)}(2)(mu-F)][FHF] (5c) has been synthesized by addition of Ph(2)PCH(2)PPh(2) to a solution of [PdMe(2)(Me(2)NCH(2)CH(2)NMe(2))](4) in THF and subsequent treatment of the reaction mixture with Et(3)N.3HF. The structure of the A-frame complex 5c has been determined by X-ray crystallography.     

Energetic ion bombardment of Ag surfaces by C<Stack><Subscript>60</Subscript><Superscript>+</Superscript></Stack> and Ga<Superscript>+</Superscript> projectiles

The ion bombardment-induced release of particles from a metal surface is investigated using energetic fullerene cluster ions as projectiles. The total sputter yield as well as partial yields of neutral and charged monomers and clusters leaving the surface are measured and compared with corresponding data obtained with atomic projectile ions of similar impact kinetic energy. It is found that all yields are enhanced by about one order of magnitude under bombardment with the C60+ cluster projectiles compared with Ga+ ions. In contrast, the electronic excitation processes determining the secondary ion formation probability are unaffected. The kinetic energy spectra of sputtered particles exhibit characteristic differences which reflect the largely different nature of the sputtering process for both types of projectiles. In particular, it is found that under C60+ impact (1) the energy spectrum of sputtered atoms peaks at significantly lower kinetic energies than for Ga+ bombardment and (2) the velocity spectra of monomers and dimers are virtually identical, a finding which is in pronounced contrast to all published data obtained for atomic projectiles. The experimental findings are in reasonable agreement with recent molecular dynamics simulations.     

Acceleration of Long‐Range Photoinduced Electron Transfer through DNA by Hydroxyquinolines as Artificial Base Pairs

The C‐nucleoside based on the hydroxyquinoline ligand (Hq) is complementary to itself and forms stable Hq–Hq pairs in double‐stranded DNA. These artificial Hq–Hq pairs may serve as artificial electron carriers for long‐range photoinduced electron transfer in DNA, as elucidated by a combination of gel electrophoretic analysis of irradiated samples and time‐resolved transient absorption spectroscopy. For this study, the Hq–Hq pair was combined with a DNA‐based donor–acceptor system consisting of 6‐N,N‐dimethylaminopyrene conjugated to 2′‐deoxyuridine as photoinducible electron donor, and methyl viologen attached to the 2′‐position of uridine as electron acceptor. The Hq radical anion was identified in the time‐resolved measurements and strand cleavage products support its role as an intermediate charge carrier. Hence, the Hq–Hq pair significantly enhances the electron hopping capability of DNA compared to natural DNA bases over long distances while keeping the self‐assembly properties as the most attractive feature of DNA as a supramolecular architecture.     

Use of monomer fraction data in the parametrization of association theories

Association theories such as the CPA (cubic-plus-association), NRHB (non-random hydrogen bonding) equations of state and the various variants of SAFT (statistical associating fluid theory) have been extensively applied to phase equilibrium calculations. Such models can also be used for estimating the monomer fraction of hydrogen bonding compounds and their mixtures. Monomer fraction data are obtained from spectroscopic measurements and they are available for a few compounds such as pure water and alcohols as well as for some alcohol–alkane and similar mixtures. These data are useful for an understanding of the capabilities and limitations of association models. The purpose of this work is two-fold: (i) to compare the performance of three models, CPA, NRHB and sPC-SAFT, in predicting the monomer fraction of water, alcohols and mixtures of alcohol-inert compounds and (ii) to investigate whether “improved” model parameters can be obtained if monomer fraction data are included in the parameter estimation together with vapor pressures and liquid densities. The expression “improved” implies parameters which can represent several pure compound properties as well as monomer fraction data for pure compounds and mixtures. The accuracy of experimental monomer fraction data is discussed, as well as the role of monomer fraction data in clarifying which association scheme should be used in these equations of state. The results reveal that the investigated association models (CPA, sPC-SAFT and NRHB) can predict, at least qualitatively correct, monomer fractions of associating compounds and mixtures. Only, small differences are observed between the models. In addition, it has been shown that, using a suitable association scheme, a single set of parameters can describe satisfactorily vapor pressures, liquid densities and monomer fractions of water and alcohols. The 4C scheme is the best choice for water, while for methanol there is small difference between the 2B and 3B association schemes.     

Improved particle-packed HPLC/MS microchips for proteomic analysis

The influence of packing process parameters (packing pressure, application of ultrasound) and the stationary phase particle size (3.5 and 5 μm) on the chromatographic performance of HPLC/MS chips was systematically investigated for proteomic samples. First, reproducibility and detection limits of the separation were evaluated with a low‐complexity sample of tryptic BSA peptides. The influence of adsorbent packing quality on protein identification was then tested with a typical proteomics sample of high complexity, a human plasma protein fraction (Cohn fraction IV‐4). All HPLC/MS chips provided highly reproducible separations of these proteomic samples, but improved packing conditions and smaller particle sizes resulted in chromatograms with narrower peaks and correspondingly higher signal intensities. Improved separation performance increased the peak capacity, the number of identified peptides, and thus the sequence coverage in the proteomic samples, particularly for low sample amounts.     

An SFG/DFG investigation of CN− adsorption at an Au electrode in 1-butyl-1-methyl-pyrrolidinium bis(trifluoromethylsulfonyl) amide ionic liquid

In this paper we report an SFG/DFG investigation of the adsorption of CN^? – used as a probe molecule to study the electrochemical double-layer structure – at a polycrystalline Au electrode in 1-butyl-1-methyl-pyrrolidinium bis(trifluoromethylsulfonyl) amide ([BMP][TFSA]) room-temperature ionic liquid (RTIL). The adsorption of CN^? yielded single SFG and DFG bands in the range from ca. 2125 to 2135 cm^?1, exhibiting a Stark tuning of ca. 3 cm^?1 V^?1. Vibrational resonances – corresponding to modes of the RTIL coadsorbed with CN^?, were found in the range from ca. 1200 to 1500 cm^?1. The study of the double-layer structure was complemented by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements, from which the differential double-layer capacity (C_DL) was estimated.     

Phase behavior and mesophase structures of 1,3,5-benzene- and 1,3,5-cyclohexanetricarboxamides: towards an understanding of the losing order at the transition into the isotropic phase

One of the simplest and most-versatile motifs in supramolecular chemistry is based on 1,3,5-benzenetricarboxamides. Variation of the core structure and subtle changes in the structures of the lateral substituents govern the self-assembly and determine the phase behavior. Herein, we provide a comprehensive comparison between the phase behavior and mesophase structure of a series of 1,3,5-benzene- and 1,3,5-cyclohexanetricarboxamides that contain linear and branched alkyl substituents. Depending on the substituent, different crystalline, plastic crystalline, and liquid crystalline phases were formed. The relatively rare columnar nematic (N(C)) phase was only observed in cyclohexane-based trisamides that contained linear alkyl substituents. Of fundamental interest in liquid crystalline supramolecular systems is the transition from the mesomorphic state into the isotropic state and, in particular, the question of how the order decreases. Temperature-dependent IR spectroscopy and XRD measurements revealed that columnar H-bonded aggregates were still present in the isotropic phase. At the clearing transition, mainly the lateral order was lost, whilst shorter columnar aggregates still remained. A thorough understanding of the phase behavior and the mesophase structure is relevant for selecting processing conditions that use supramolecular structures in devices or as fibrillar nanomaterials.     

Excited state dynamics of metastable phthalocyanine-tetrasulfonate tetra-anions probed by pump/probe photoelectron spectroscopy

Femtosecond time-resolved pump-probe photoelectron spectroscopy was used to study elementary relaxation processes occurring in isolated phthalocyanine-tetrasulfonate tetra-anions ([MPc(SO3)4]4-, M=Cu,Ni, and "free-base" [H2Pc(SO3)4]4-) following Q band excitation by one-photon absorption at 775 nm. Whereas the Cu and Ni systems decay rapidly by means of internal conversion without electron loss, the free-base phthalocyanine primarily undergoes excited state tunneling electron emission. This reflects less efficient coupling to lower lying states within the corresponding spin manifold. Results are interpreted in terms of (time-dependent) density functional theory calculations of ground and electronically excited states and kinetically modeled to yield the associated rates.     

New statistical mechanical model for calculating Kirkwood factors in self-associating liquid systems and its application to alkanol+cyclohexane mixtures

A new statistical mechanical model for calculating Kirkwood factors in self-associating molecular liquids and their mixtures with nonassociating components has been developed in a consistent way which is based on an extended version of the Flory-Huggins model taking into account chemical association equilibria. The majority of molecular parameters involved into the theory has been fixed by independent quantum mechanical ab initio calculations of associated molecular clusters. The model is also able to predict other thermodynamic mixture properties such as the enthalpy of mixing and also the infrared absorbance of monomer alcohol species as function of concentration. Experimental results of nine alcohol+cyclohexane mixtures taken from the literature have been used to test the new model. The Kirkwood correlation factor gK, the molar enthalpy of mixing HmE, and the monomer IR absorbance can be described simultaneously in excellent agreement with experimental data covering the whole range of mole fraction including temperature dependence of gK, HmE, and the IR absorbance. Two parameters have been adjusted freely for each system. A third parameter for the nonspecific intermolecular dispersion interactions has been adjusted within a limited range of possible values given by physical arguments. The model opens a new way of a more reliable understanding of structures and equilibrium properties of hydrogen bonded systems in the condensed liquid state.     

Bioanalytical chemistry of cytokines – A review

Cytokines are bioactive proteins produced by many different cells of the immune system. Due to their role in different inflammatory disease states and maintaining homeostasis, there is enormous clinical interest in the quantitation of cytokines. The typical standard methods for quantitation of cytokines are immunoassay-based techniques including enzyme-linked immusorbent assays (ELISA) and bead-based immunoassays read by either standard or modified flow cytometers. A review of recent developments in analytical methods for measurements of cytokine proteins is provided. This review briefly covers cytokine biology and the analysis challenges associated with measurement of these biomarker proteins for understanding both health and disease. New techniques applied to immunoassay-based assays are presented along with the uses of aptamers, electrochemistry, mass spectrometry, optical resonator-based methods. Methods used for elucidating the release of cytokines from single cells as well as in vivo collection methods are described.