Influence of solvents on the insertion of methacrolein into zirconacyclopropenes

The reaction of Cp₂Zr(L)(η²-Me₃SiC₂) (L = THF, py) with equimolar amounts of H₂C = CMe-CHO at room temperature depends strongly on the ligands L and the solvents that are used. With L = THF, in the THF solution the insertion product

Full-size image

1 was isolated, whereas by conducting the reaction in n-hexane solution an alkyne substitution with 1,4-coordination of the methacrolein takes place and the binuclear complex [

Full-size image

2 was obtained. In conttrast, with L = py (a stronger ligand) only a 1:1 ratio of 1 and 2 was observed in both THF and in n-hexane. At 50°C complex 1 was converted into 2 and the alkyne was eliminated quantitatively.

Complexes 1 and 2 were characterized by IR and NMR spectroscopical measurements and 1 by an additional X-ray structure determination.     

Detection of Escherichia coli O157:H7 bacteria by a combination of immunofluorescent staining and capillary electrophoresis

As the number of incidents of bacterial infections continues to rise around the globe, simpler, faster, and more sensitive diagnostic techniques are required to improve the safety of the food supply and to screen for potential bacterial infections in humans. We present here direct and indirect approaches for the detection of bacteria, which are based upon a combination of immunofluorescent staining and capillary electrophoresis. In the direct approach, Escherichia coli O157:H7 bacteria stained with fluorescein-tagged specific antibodies are detected by CE, while in the indirect approach fluorescein-tagged specific antibodies to E. coli are first captured by E. coli O157:H7 bacteria and then released and detected by CE. We have identified suitable bacteria staining and CE protocols, which involved a 10 mM Tris-borate-EDTA (TBE) buffer, 0.25 micro g antibody/1 million bacteria, and capillaries dynamically coated with poly-N-hydroxyethylacrylamide (polyDuramide). We have also successfully detected the presence of E. coli O157:H7 in contaminated meat. The total time required for analysis was 6-8 h, which is less than that realized in most commercial assays presently available.     

Efficient syntheses of (±)-hydrangenol, (±)-phyllodulcin and (±)-macrophyllol

In this paper we report on a efficient and flexible synthetic route towards the total syntheses of the dihydrocoumarine derivatives hydrangenol (1), phyllodulcin (1a) and macrophyllol (6b). The syntheses started with a readily available phosphonium salt 2 and suitable modified benzaldehydes 3/3a/3b resulting in 46 to 61% overall yields in three to four-steps sequences. The racemic products could be separated by chiral HPLC. The evidence of the (R)-enantiomer for sweetness could be demonstrated for 1a.     

C2-Symmetric 4,4′,5,5′-Tetrahydrobi(oxazoles) and 4,4′,5,5′-Tetrahydro-2,2′-methylenebis[oxazoles] as Chiral Ligands for Enantioselective Catalysis Preliminary Communication

The synthesis of a series of enantiomerically pure, C₂-symmetric 4,4′,5,5′-tetrahydro-2,2′-methylenebis[oxazoles] and 4,4′,5,5′-tetrahydro-2,2′-bi(oxazoles) is reported. Copper complexes with anionic tetrahydromethylenebis[oxazole] ligands are efficient catalysts for the enantioselective cyclopropane formation from olefins and diazo compounds (up to 96% ee in the reaction of styrene with menthyl diazoacetate). Tetrahydrobi(oxazole)iridium(I) complexes were found to catalyze transfer hydrogenations of aryl alkyl ketones with i-PrOH (up to 91% ee). Tetrahydrobi(oxazole)palladium complexes can be used as enantioselective catalysts for allylic nucleophilic substitution (up to 77% ee in the reaction of PhCH?CHCH(OAc)Ph with NaHC(COOMe)₂).     

Simple test system for single molecule recognition force microscopy

We have established an easy-to-use test system for detecting receptor-ligand interactions on the single molecule level using atomic force microscopy (AFM). For this, avidin-biotin, probably the best characterized receptor-ligand pair, was chosen. AFM sensors were prepared containing tethered biotin molecules at sufficiently low surface concentrations appropriate for single molecule studies. A biotin tether, consisting of a 6 nm poly(ethylene glycol) (PEG) chain and a functional succinimide group at the other end, was newly synthesized and covalently coupled to amine-functionalized AFM tips. In particular, PEG₈₀₀ diamine was glutarylated, the mono-adduct NH₂-PEG-COOH was isolated by ion exchange chromatography and reacted with biotin succinimidylester to give biotin-PEG-COOH which was then activated as N-hydroxysuccinimide (NHS) ester to give the biotin-PEG-NHS conjugate which was coupled to the aminofunctionalized AFM tip. The motional freedom provided by PEG allows for free rotation of the biotin molecule on the AFM sensor and for specific binding to avidin which had been adsorbed to mica surfaces via electrostatic interactions. Specific avidin-biotin recognition events were discriminated from nonspecific tip-mica adhesion by their typical unbinding force (∼40 pN at 1.4 nN/s loading rate), unbinding length (<13 nm), the characteristic nonlinear force-distance relation of the PEG linker, and by specific block with excess of free d-biotin. The convenience of the test system allowed to evaluate, and compare, different methods and conditions of tip aminofunctionalization with respect to specific binding and nonspecific adhesion. It is concluded that this system is well suited as calibration or start-up kit for single molecule recognition force microscopy.     

Non-covalent calixarene-amino acid complexes formed by MALDI-MS

Non-covalent inclusion complexes formed between amino acids and derivatized calix[6]arenes are observed in MALDI mass spectrometry. The methyl, ethyl, and propyl ester derivatives of calix[6]arene yielded amino acid complexes, while the smaller calix[4]arene analogs did not. Similarly the underivatized calix[6]arene and calix[4]arene did not produce complexes. Amino acid complexes were observed for nearly all 20 amino acids in time-of-flight (TOF) analysis. In Fourier transform mass spectrometry (FTMS) analysis, however, only the most basic amino acids arginine, histidine, and lysine formed stable adducts. The complexes were abundant under matrix-assisted laser desorption ionization (MALDI) conditions, which suggested favorable interactions between host and guest.     

A Torquospecific 1,5-Electrocyclization

Saponification of homodiazepine 1a and 1b , in the absence of any proton donors, led to the formation of the 6π electron anionic species A which, by virtue of a 1,5-electrocyclization, is in equilibrium with the allylic anion B . This latter tricyclic species is thermodynamically less favoured than its bicyclic isomer A . Nevertheless, B could be trapped by acylation and led tupe- 2 compounds which are the major reaction products. This is due to the fact that B is more nucleophilic and, therefore, much more reactive than A . The transoid topology of the tricyclic products 2 was demonstrated by ¹H-NMR and by an X-ray diagram of 2d . The transoid geometry of 2 is a consequence of a torquospecific 1,5-electrocyclization (of A ), which is due to a steric, and possibly even to an electronic factor.     

N‐Silylaminotitanium Chlorides — Synthesis,Structures, Multinuclear Magnetic Resonance,and some Applications

N‐Silylaminotitanium trichlorides, Me₃S(R)N‐TiCl₃ ( 18 ) [R = ^tBu ( a ), SiMe₃ ( b ), 9‐borabicyclo[3.3.1]nonyl (9‐BBN)( c )], and (CH₂SiMe₂)₂N‐TiCl₃ ( 18d ) were obtained in high yield and high purity from the reaction of the respective bis(silylamino)plumbylene with an excess of titanium tetrachloride. The crystal structure of 18a was determined by X‐ray analysis. The reactions of the analogous stannylenes with an excess of TiCl₄ did not lead to 18 . N‐Lithio‐trimethylsilyl[9‐(9‐borabicyclo[3.3.1]nonyl)]amine ( 8 ) was prepared, structurally characterized and used for the synthesis of a new bis(amino)stannylene 10 and a plumbylene 11 . The compounds 18a—d served as ideal starting materials for the synthesis of bis(silylamino)titanium dichlorides, where the silylamino groups can be identical ( 19 ) or different ( 20 ). This was achieved either by the reaction of 18 again with bis(amino)plumbylenes or with lithium N‐silylamides. In contrast to the direct synthesis starting from titanium tetrachloride and two equivalents of the respective lithium amide, which in general affords 19 with identical amino groups only in low yield, the procedure starting from 18 is much more versatile and gave the pure compounds 19 or 20 in almost quantitative yield. Further treatment of the dichlorides 19 or 20 with lithium amides led to tris(amino)titanium chlorides 21 . The dichlorides 19 or 20 reacted with two equivalents of alkynyllithium reagents to give the first well characterized examples of di(alkyn‐1‐yl)bis(N‐silylamino)titanium compounds 22 — 27 . These compounds reacted with trialkylboranes (triethyl or tripropylborane) by 1, 1‐organoboration. In some cases, the extremely reactive reaction products could be identified as novel 1, 1‐bis(silylamino)titana‐2, 4‐cyclopentadienes 28 — 31 bearing a dialkylboryl group in 3‐position. In solution, the proposed structures of all products were deduced from a consistent set of data derived from multinuclear magnetic resonance spectroscopy (¹H, ¹¹B, ¹³C, ¹⁴N, ¹⁵N, ²⁹Si, ³⁵Cl NMR).     

Metal complexes of porphycene,corrphycene, and hemiporphycene: stability and coordination chemistry

Porphyrin (P), porphycene (Pc), corrphycene (Cn), and hemiporphycene (Hpc) represent a series of well defined "4-N in" constitutional porphyrin isomers. These isomers, in the form of their octaethyl derivatives, represent a congruent set of porphyrinoids whose properties can be compared. In this study we report how variations in electronic structure and nitrogen-core size in the free-base forms of these four systems are reflected in the properties of their corresponding metal complexes. Specifically, the effects that these differences have on the axial ligation properties of the Zn(II), Mg(II), Ni(II), and Co(II) complexes of P, Pc, Cn, and Hpc in toluene using pyridine as the axial ligand are detailed. Also reported are the relative stabilities of these complexes under acidic conditions. It is shown that for the zinc, magnesium, and cobalt complexes, there are distinct differences in the ability to maintain four-, five-, or six-coordinate geometries in the presence of similar concentrations of pyridine. By contrast, no apparent differences in axial ligand binding affinity are seen for the four nickel complexes. Little difference in stability was likewise seen when these same complexes were subject to acid-mediated demetallation, with all four falling into stability class II, according to the accepted porphyrin stability ranking system. High stabilities were also seen in the case of the cobalt complexes, with the Pc and Cn complexes being of stability class III and the P and Hpc derivatives falling into stability class II. The Zn(II) and Mg(II) complexes were all far less stable than the corresponding Ni(II) and Co(II) complexes. In this case, semiquantitative analyses of the rate of acid-induced decomposition revealed the following stability sequence P>Cn>Hpc>Pc for both the Zn(II) and Mg(II) complexes. Single-crystal X-ray diffraction structures were solved for the Zn(II), Mg(II), and Ni(II) complexes of the octaethyl derivatives of Hpc, Cn, and Pc as well as a Co(II) octamethylcorrphycene and are reported as part of this study. These solid-state structures confirm four-coordinate species for the Ni(II) complexes, four- and five-coordinate species for the Mg(II) and Zn(II) complexes, and a six-coordinate species for the lone Co(II) complex.