Thermal density fluctuations in amorphous polymers as revealed by small angle X-ray diffraction

Summary Thermal density fluctuations in amorphous polymethyl methacrylate, polycarbonate and polyethylene terephthalate were studied by means of small angle X-ray scattering. The measurements were performed in a temperature range from 20 °C up to about 50 °C above the glass transition temperatureT _g of the individual sample.AboveT _g the experimental values of the fluctuations are proportional to the isothermal compressibility and the temperature of the sample as predicted by the fluctuation theory for a system in thermodynamic equilibrium.At temperatures belowT _g this relation is no longer correct. The experimentally determined fluctuations are now proportional to the compressibility of the sample in the equilibrium state atT _g and to the actual temperature of the glassy sample. By considering a statistical ensemble with exchange of energy, particles and order between the systems of the ensemble an equation can be derived for the fluctuations of the number of particles per given volume which predicts the observed behaviour. The order parameter takes into account the fact that the properties of the glassy state depend on the way by which the state was produced.

---

Zusammenfassung Es wurden thermische Dichtefluktuationen in amorphem Polymethylmethacrylat, Polycarbonat und Polyäthylenterephthalat mit Hilfe der Röntgenkleinwinkelstreuung untersucht. Die Messungen erstrecken sich über einen Temperaturbereich von 20 °C bis zu etwa 50 °C oberhalb der GlastemperaturT _g der jeweiligen Probe.In Übereinstimmung mit den Ergebnissen der Fluktuationstheorie sind die Fluktuationen oberhalb vonT _g proportional zur isothermen Kompressibilität und zur Temperatur der Probe.Unterhalb der Glastemperatur ist diese Beziehung nicht mehr erfüllt. Hier ist die Fluktuation proportional zur Kompressibilität der Probe im Gleichgewichtszustand beiT _g und zur Temperatur. Auf der Basis einer statistischen Gesamtheit mit der Austauschmöglichkeit von Energie, Partikel und Ordnung zwischen den Systemen der Gesamtheit kann eine Beziehung für die Dichtefluktuation abgeleitet werden, die mit den experimentellen Ergebnissen übereinstimmt. Der zusätzliche Ordnungsparameter berücksichtigt die Tatsache, daß die Eigenschaften im Glaszustand wegabhängig sind.

     

Bestimmung von Nichtmetallen in Metallen

Zusammenfassung Unter der Beschränkung auf die Nichtmetallspuren in den technisch wichtigen Metallen und Legierungen wird ein allgemeiner Überblick gegeben.Aus der Vielzahl der Analysenmethoden werden die in breiterem Umfang anwendbare Verbrennung für die Bestimmung von Kohlenstoff und Schwefel und die Heißextraktion für die Bestimmung von Wasserstoff, Sauerstoff und Stickstoff näher behandelt.Für die Bestimmung von Wasserstoff und Sauerstoff in Aluminium und Kupfer und für den Kohlenstoffgehalt der Nichteisenmetalle wird der heutige Wissensstand gegeben.Über Untersuchungen zur Probenhomogenität von AKP für Sauerstoff in Metallen und über eine Methode zur Herstellung von entsprechenden Primärstandards wird berichtet.Betrachtungen zur Frage von Aufwand und Nutzen analytischer Arbeit werden angestellt.

---

Summary A general summary is given with a limitation to non-metal traces in metals and alloys of technical interest.From the great number of analytical methods those applicable on a larger scale, i.e. combustion-determination of carbon and sulphur — and vacuum fusion—determination of hydrogen, oxygen and nitrogen — are dealt with more closely.For the determination of hydrogen and oxygen in aluminium and copper as well as for the carbon contents of non-ferrous metals the present state of knowledge is described.Furthermore, investigations concerning homogenity of AKP-standard-samples for analysing the oxygen-contents in metals and a method for setting up respective primary standards are described.Finally, the problematic relation between expenses and usefulness of analytical work is discussed.

     

1-Alkoxy-2-azaallenyl-komplexe von chrom und wolfram

The successive reaction of (CO)₆M with Na[NCR₂¹] and [Et₃O]BF₄ yields (CO)₅M[C(NCR₂¹)OEt] (II: M = Cr; III: M = W; CR₂¹ = C(C₆H₄Br-p)₂ (a), CPh₂ (b), C(C₆H₄OMe-p)₂ (c), C(C₆H₄)₂O (d), CBu₂^tt (e)). Hexacarbonyltungsten, (CO)₆W, reacts with Na[NCPh₂] and MeOSO₂F to give (CO)₅W[C(NCPh₂) OMe] (IV). X-Ray analysis of IIe shows that: (1) the CNC fragment is almost linear (171.7°); (2) the two NC bond lengths are equal within experimental error; and (3) the O,C,Cr,N plane is perpendicular to the C(Me₃),C,N,C(Me₃) plane (90.0°). Therefore compounds II–IV are best described as 1-alkoxy-2-azaallenyl complexes.     

Methodische Hinweise und Fehlerm?glichkeiten bei der Untersuchung membranfiltrierter w?\riger L?sungen

Zusammenfassung Es wird auf eine bisher nicht beachtete Fehlermöglichkeit bei der analytischen Untersuchung und Weiterverwendung von membranfiltrierten Lösungen hingewiesen. Die üblichen Membranfilter enthalten zur Hydrophilisierung bestimmte Mengen anionaktiver Tenside, die sich nur in wechselndem Ausma\e vor dem Gebrauch eluieren lassen. Bei der Untersuchung von membranfiltrierten Flu\-, Grund- und Trinkwasserproben findet man dadurch zu hohe Tensidkonzentrationen und bei der Austestung und Verwendung sterilfiltrierter Wirkstofflösungen u. a. können betrÄchtliche Störungen eintreten. Von Fall zu Fall ist darum eine sorgfÄltige Versuchskontrolle hinsichtlich einer spezifischen Tensidwirkung nötig.

---

Summary Reference is made to a source of error so far unknown in analytical examinations of aqueous membrane-filtered solutions. Membrane filters usually contain a certain amount of anionic surface-active substances for hydrophilizing purposes. These substances are only partly eliminated before the use of the filter. Therefore, in samples of membrane-filtered river, underground and tap water concentrations are found higher than the actual detergent content. There may also be interferences with the testing of bio-active substances, for instance of antibiotics. Advice is given to control carefully the possible specific effect of surface-active substances during these experiments.

     

Fragmentation of 1-aryl-5-(2-dialkylaminovinyl)-1H-tetrazoles upon electron impact

The mass spectrometric behaviour of 1-aryl-5-(2-dialkylaminovinyI)-lH-tetrazoles was studied, especially 1-phenyl-5-(2-dimethylaminovinyl)-l H-tetrazole as a typical example of D- and ¹⁵N-labelled derivatives revealed a rearrangement via a carbodiimide-like intermediate ion.     

Substituenteneffekte auf azido-tetrazolo-gleichgewichte elektronische und sterische effekte bei s-triazolo[4,3-c]tetrazolo[1,5-a]pyrimidinen1

The azido tetrazolo valence isomerism of twenty 9-methyl-s-triazolo[4,3-c]tetrazolo[1,5-a]pyrimidines with different substituents at position 5 has been studied by means of ¹H NMR spectroscopy. All the compounds have been found to be tetrazoles in the solid state and in (CD₃)₂SO solution; in CF₃COOH azido and tetrazolo isomers are in equilibrium. From equilibrium constants K and thermodynamic data determined it is concluded that in this series K depends on both electronic effects and steric requirements of the 5-substituents. A linear relation between K and σ was found for 5-arylderivatives because ΔS° keeps approximately constant and the substituent mainly operates on ΔH°.     

Frequency-domain photopyroelectric spectroscopy of condensed phases (PPES): A new,simple and powerful spectroscopic technique

A new, powerful, and experimentally very convenient spectroscopic technique is described. The technique uses pyroelectric polyvinylidene difluoride (PVDF) thin film detectors in contact with solid or liquid samples. The instrumental and spectral characteristics of photopyroelectric spectroscopy (PPES) are presented, and its advantages over conventional photoacoustic spectroscopy (PAS) are discussed.     

The Enol of Acetone during Photochemical Reactions of 3-Hydroxy-3-methyl-2-butanone and of Acetone

The enol of acetone, formed by disproportionation reactions of 1-hydroxy-1-methylethyl radicals, is detected by NMR, spectroscopy during photoreactions of 3-hydroxy-3-methyl-2-butanone in acetonitrile and of acetone in 2-propanol and slowly tautomerizes to acetone. The photolysis of 3-hydroxy-3-methyl-2-butanone is shown to proceed via Type I cleavage, predominantly from an excited triplet state.     

Rates of base-catalysed cleavage of pyridyl-, quinolyl-, picolyl- and (quinolylmethyl)-trimethylsilanes

Rates of cleavage of some picoyl- and (quinolylmethyl)-trimethylsilanes (RSiMe₃, where R = PyCH₂ or QnCH₂SiMe₃) have been measured in “90%” aqueous methanolic sodium methoxide at 50°C. Relative reactivities are: 2-PyCH₂, 1.0; 3-PyCH₂, 0.030; 4-PyCH₂, 8.9; 2-QnCH₂, 41; 3-QnCH₂, 0.161; 4-QnCH₂, 37. The rates correlate well with those for base-catalysed hydrogen-exchange in the parent carbon acids RH. Approximate pK_a's (based on the scale of ion-pair acidities in CsNHC₆H₁₁H₂NC₆H₁₁, with pK_a of 9-phenylfluorene = 18.6) for the carbon acids, RH, can be derived as follows: 2-PyCH₃, 29.5; 3-PyCH₃, 34; 4-PyCH₃, 27; 2-QnCH₃, 25; 3-QnCH₃, 32; 4-QnCH₃, 25.Rates of cleavage of pyridyl- and quinolyl-trimethylsilanes (PySiMe₃ and QnSiMe₃) by sodium hydroxide in 4 : 1 v/v Me₂SO/H₂O at 50°C have also been measured; and the relative reactivities are: 2-Py, 1.0; 3-Py, 2.9; 4-Py, 8.4; 2-Qn, 15.9; 3-Qn, 12.7; 4-Qn, 184. The sequence of reactivity differes from that for base-catalysed hydrogen-exchange at the relevant positions of pyridine and quinoline, indicating that the reactivities are not determined in both cases (if in either) solely by the stabilities of the corresponding carbanions.