Tailoring of high-Q-factor surface plasmon modes on silver microtubes

We investigate the excitation of surface plasmon polaritons on silver tubes with finite-difference time-domain simulations. These surface plasmon polaritons exhibit azimuthal whispering gallery modes with quality factors in the hundreds. We show that the high quality factors arise from the coupling of the surface plasmon modes to photonic modes inside the tube. We examine the influence of a gain material on the quality factors and find that for material data of rhodamine 6G, the quality factors are enhanced significantly up to values of 3000.     

Enhanced angular tolerance of resonant waveguide grating reflectors

We introduce an approach to enhance the angular tolerance of resonant waveguide gratings by stacking two resonant structures on top of each other. It is shown that reflectivities close to unity can be retrieved over the entire angular spectrum by a double T-shaped grating configuration. Although a combination of silicon as the high-index and diamond as the low-index material is considered, the principles of our new approach can also be used to realize monolithic silicon structures with similar properties. We illustrate that the functionality of the device can be understood by a decomposition into separated elements. Our approach might have compelling applications as new diffractive-reflective optical components with low-coating thermal noise in the field of high-precision metrology.     

Spectroscopy of the hyperfine structure of antiprotonic 4He and 3He

The spin magnetic moment $\mu^{\overline{p}}_{s}$ of the antiproton can be determined by comparing the measured transition frequencies in $\overline{p}^4$ He^?+? with three-body QED calculations. A comparison between the proton and antiproton can then be used as a test of CPT invariance. The highest measurement precision of the difference between the proton and the antiproton spin magnetic moments to date is 0.3%. A new experimental value of the spin magnetic moment of the antiproton was obtained as $\mu^{\overline{p}}_{s} = -2.7862(83)\mu_{N}$ , slightly better than the previously best measurement. This agrees with $\mu^{p}_{s}$ within 0.24%. In 2009, a new measurement with antiprotonic ³He has been started. A comparison between the theoretical calculations and experimental results would lead to a stronger test of the theory and address systematic errors therein. A measurement of this state will be the first HF measurement on $\overline{p}^3$ He^?+?. We report here on the new experimental setup and the first tests.     

Cosmic curvature from de Sitter equilibrium cosmology

I show that the de Sitter equilibrium cosmology generically predicts observable levels of curvature in the Universe today. The predicted value of the curvature, Ω(k), depends only on the ratio of the density of nonrelativistic matter to cosmological constant density ρ(m)(0)/ρ(Λ) and the value of the curvature from the initial bubble that starts the inflation, Ω(k)(B). The result is independent of the scale of inflation, the shape of the potential during inflation, and many other details of the cosmology. Future cosmological measurements of ρ(m)(0)/ρ(Λ) and Ω(k) will open up a window on the very beginning of our Universe and offer an opportunity to support or falsify the de Sitter equilibrium cosmology.     

High-speed CH planar laser-induced fluorescence imaging using a multimode-pumped optical parametric oscillator

We report on high-speed CH planar laser-induced fluorescence (PLIF) imaging in turbulent diffusion flames using a multimode-pumped optical parametric oscillator (OPO). The OPO is pumped by the third-harmonic output of a multimode Nd:YAG cluster for direct signal excitation in the A-X (0,0) band of the CH radical. The lasing threshold, conversion efficiency, and linewidth are shown to depend on the number of pump passes in the ring cavity of the OPO. Single-shot CH PLIF images are acquired at 10 kHz with excitation energy up to 6 mJ/pulse at 431.1 nm. Signal-to-noise ratios of ~25-35 are the highest yet reported for high-speed CH PLIF.     

High‐Temperature Stable Zirconia Particles Doped with Yttrium,Lanthanum, and Gadolinium

Zirconia microspheres synthesized by a wet‐chemical sol–gel process are promising building blocks for various photonic applications considered for heat management and energy systems, including highly efficient reflective thermal barrier coatings and absorbers/emitters used in thermophotovoltaic systems. As previously shown, pure zirconia microparticles deteriorate at working temperatures of ≥1000 °C. While the addition of yttrium as a dopant has been shown to improve their phase stability, pronounced grain growth at temperatures of ≥1000 °C compromises the photonic structure of the assembled microspheres. Here, a new approach for the fabrication of highly stable ceramic microparticles by doping with lanthanum, gadolinium, and a combination of those with yttrium is introduced. The morphological changes of the particles are monitored by scanning electron microscopy, ex situ X‐ray diffraction (XRD), and in situ high‐energy XRD as a function of dopant concentration up to 1500 °C. While the addition of lanthanum or gadolinium has a strong grain growth attenuating effect, it alone is insufficient to avoid a destructive tetragonal‐to‐monoclinic phase transformation occurring after heating to >850 °C. However, combining lanthanum or gadolinium with yttrium leads to particles with both efficient phase stabilization and attenuated grain growth. Thus, ceramic microspheres are yielded that remain extremely stable after heating to 1200 °C.     

Laser systems specialized for laser spectroscopy at storage rings

Laser spectroscopy at storage rings often suffers from a limited resolution due to Doppler-broadened resonances. Broadening is caused by the velocity spread of the ions stored in the beam. In the following, the present status of our work on laser systems specialized on the specific needs of laser spectroscopy at storage rings is reported. Two pulsed laser systems were developed. One is a dye laser whose spectral bandwidth can be switched by inserting different Littrow-prisms into the resonator. An increase in bandwidth up to a factor of 45 was achieved. This laser was used for fast qualitative scans and high resolution measurements. The other laser system is a Nd : YAG laser pumped optical parametric oscillator. It is a tunable laser system covering the spectral range from 410 to 4000 nm. Furthermore, a continuous wave laser with a frequency shifted feedback cavity is described. It shows broadband emission with an adjustable bandwidth of up to 4.5 GHz. This laser can be advantageous for laser cooling of ion beams. This revised version was published online in August 2006 with corrections to the Cover Date.     

Assessment of mitral regurgitation by magnetic resonance imaging

To evaluate the potential of magnetic resonance imaging (MRI) in detection and quantification of mitral regurgitation, 26 pts. with echocardiographically or angiographically documented mitral regurgitation were examined using a 0.5 Tesla superconducting magnet. In each patient a multislice-multiphase study in a sagittal-coronal double angulated projection (four-chamber view equivalent) was performed to assess left and right ventricular volumes, ejection fraction and regurgitant fraction. Additionally a blood flow sensitive cine-study (fast field echo: FFE) was done to visualize direction and area of regurgitant jet. MRI data were compared with quantitative and qualitative assessment of mitral regurgitation by angiography, 2D echocardiography, Doppler sonography and color flow mapping. Using the FFE mode MRI was able to detect the regurgitant jet as a typical signal loss within the left atrium in all patients. The ratio of regurgitant jet area/left atrium area as determined by MRI showed a correlation with a comparable ratio from color Doppler sonography of R = 0.87 (p < 0.001). There was also good agreement in semiquantitative grading of mitral regurgitation between MRI and angiography (R = 0.77, p < 0.001). The determination of left and right ventricular stroke volume allowed the calculation of the regurgitant fraction, which showed a correlation with invasively determined regurgitation fraction of R = 0.84 (p < 0.001). These data provide additional information that MRI may be useful as a noninvasive technique to detect and quantify mitral regurgitation.     

Development of a laser photothermoacoustic frequency-swept system for subsurface imaging: theory and experiment

In conventional biomedical photoacoustic imaging systems, a pulsed laser is used to generate time-of-flight acoustic information of the subsurface features. This paper reports the theoretical and experimental development of a new frequency-domain (FD) photo-thermo-acoustic (PTA) principle featuring frequency sweep (chirp) and heterodyne modulation and lock-in detection of a continuous-wave laser source at 1064 nm wavelength. PTA imaging is a promising new technique which is being developed to detect tumor masses in turbid biological tissue. Owing to the linear relationship between the depth of acoustic signal generation and the delay time of signal arrival to the transducer, information specific to a particular depth can be associated with a particular frequency in the chirp signal. Scanning laser modulation with a linear frequency sweep method preserves the depth-to-delay time linearity and recovers FD-PTA signals from a range of depths. Preliminary results performed on rubber samples and solid tissue phantoms indicate that the FD-PTA technique has the potential to be a reliable tool for biomedical depth-profilometric imaging.