Diffraction of elastic waves by a free wedge. Reduction to a singular integral equation

The problem of diffraction of a plane elastic wave by a free wedge is considered. A method of reduction of the problem to a singular integral equation is proposed.Translated from Zapiski Nauchnykh Seminarov Leningradskogo Otdeleniya Matematicheskogo Instituta im. V. A. Steklova, Vol. 179, pp. 37–45, 1989.     

Two-stream-like mechanism of zonal-flow generation by Rossby waves in a shallow rotating fluid

It is shown that the small-scale Rossby waves in a shallow rotating fluid placed in a gravitational field can generate large-scale zonal flows by means of a two-stream-like mechanism. This mechanism is revealed under the conditions when the Lighthill instability criterion is not satisfied. The text was submitted by the authors in English.     

Low-temperature reaction of magnesium with fluorobenzene

The low-temperature reaction of magnesium with fluorobenzene has been investigated. Joint condensation of magnesium and fluorobenzene vapours at low temperatures quantitatively gave phenylmagnesium fluoride in one stage.     

Account of Thermal Flow Through Metal-Semimetal BiSb Contact Boundary for Determination of EHF Detector Volt-Watt Sensitivity

Bismuth, antimony and its alloys are the typical representatives of a class of semimetals, which electric conductance is lower in 10²-10³ times, than of usual well conducting an electrical current metals. The alloys bismuth with antimony have semi-conductor properties in wide area of compositions at temperatures below 77 °K. The semimetals are rather perspective materials from the point of view of their probable application in various devices [1,2,3].In present time the semimetal alloys BiSb have wide application in thermoelectric generators and refrigerators. In work [3] the opportunity of use of semimetals BiSb with percentage content of Bi and Sb from 8 % up to 25 % was shown as high-sensitivity and of small inertion indicators of the mm range radiation where thermoelectric effect is used. The principle of action of such indicators is based on occurrence of temperature gradient in a semimetal crystal BiSb that has two contacts of the various area with flowing electrical current. Basic element of such device is the dot contact metal - semimetal. One of the main characteristics is volt-watt sensitivity of metal-semimetal BiSb contact which calculating is shown in present work.     

Assessment of thermal expansion coefficient of methylsilsesquioxane thin film

For the methylsilsesquioxane film whose optical birefringence is almost zero, it was recently reported that its vertical thermal expansion coefficient (CTE) was approximately one order of magnitude larger than the lateral CTE. Though the birefringence is not an absolute predictor of anisotropic behavior, the discrepancy in both the CTEs was so remarkable that it was essential to investigate whether the anisotropy was intrinsic property or not. If the effect of Poisson's ratio is considered in the calculation of the vertical CTE and when elastic modulus measured by surface acoustic wave spectroscopy is used in the assessment of the lateral CTE, both the CTEs are coincident with each other. Therefore, it can be concluded that the discrepancy in the CTEs can be attributed to a higher in‐plane polymer chain orientation but it can also arise from the misleadingly assumed modulus and Poisson's ratio. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3109–3120, 2006     

Minimum boundary touching tilings of polyominoes

We study the problem of tiling a polyomino P with as few squares as possible such that every square in the tiling has a non‐empty intersection with the boundary of P . Our main result is an algorithm which given a simply connected polyomino P computes such a tiling of P . We indicate how one can improve the running time of this algorithm for the more restricted row‐column‐convex polyominoes. Finally we show that a related decision problem is in NP for rectangular polyominoes. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Mutual coupling of elements in finite microstrip antennas

The mutual coupling of the radiating elements in microstrip antennas is studied using a rigorous electrodynamic approach in which the field singularities at the radiator edges are taken into account with analytic accuracy. A spectral method is employed in combination with a method of semi-inversion by extraction of the Green-function singularity. The degree of interaction of the elements of microstrip structures at the fundamental and higher current harmonicsis determined, and the applicability of various approximations is assessed.Radio-Astronomy Institute, Academy of Sciences of Ukraine. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 35, No. 8, pp. 688–701, August, 1992.     

Research problem

This section appears from time to time. Contributions are invited, and should be submitted to R C. Thompson, Mathematics Department. University of California, Santa Barbara, CA93106-3080, USA.     

Deuterium NMR studies of inositol liquid crystals [1]

Deuterium NMR investigations are presented on members of two new mesogenic series derived from the naturally occurring stereoisomers myo- and scW/o-inositol. Tetraethers of these two series exhibit thermotropic columnar phases in which the columns are apparently formed by stacked hydrogen bonded dimers of these molecules which chemically are vicinal diols. Deuterium NMR measurements were performed on the tetraoctyl homologues 2e (a cis diol) and 3e (a trans diol) of these series. We have investigated mixtures of these diols with small amounts of benzene-d₆ as probe molecules as well as samples of the neat diol compounds deuteriated at their hydroxyl groups. The results obtained show that the mesophases of both compounds are uniaxial and align partially in a magnetic field upon slow cooling from their isotropic liquids. The alignment is with the director parallel to the field direction indicating that the anisotropic magnetic susceptibility of this mesophase is positive. The deuterium quadrupole splitting of the benzene-d₆ probe in both systems is temperature dependent and in the trans diol 3e it even changes sign. This is interpreted in terms of a model in which the benzene-d₆ probe equilibrates rapidly between two (or more) solvation sites with quadrupole splittings of opposite signs The deuterium spectra of the neat deuterium labelled cis diol 2e exhibit two different signals due to the two deuterons which are located at the axial and equatorial hydroxyl groups. This indicates that there is no fast intra- or intermolecular exchange of the hydroxyl hydrogens. The overall quadrupole splittings of the hydroxyl deuterons in this compound are highly reduced compared to their static values and this is interpreted in terms of motional modes involving both reorientation of the hydroxyl deuterons about their C-O axis and overall reorientation of the molecules (or pairs of molecules) around the columnar axes. The corresponding spectra of the neat deuteriated trans diol 3e exhibit a single spectrum indicating that both hydroxyl deuterons in this compound are equivalent, or very nearly so. Within the mesophase region the spectrum undergoes gradual changes due to the increase in the molecular mobility, but the overall motional narrowing is less than in the cis isomer 2e. Apparently due to stronger hydrogen bonding in the trans isomer 3e the precession of the hydroxyl groups is hindered and a fast molecular reorientation is only possible at high temperatures.     

Differential determination of arsenic(III) and total arsenic using flow injection on-line separation and preconcentration for graphite furnace atomic absorption spectrometry

Arsenic(III) can be quantitatively extracted using sodium diethyldithiocarbamate (NaDDTC) as the complexing agent and C18 reversed phase packing as the column material for solid phase extraction. Arsenic(V) must be reduced to its trivalent oxidation state prior to extraction. A mixture of sodium sulphite, hydrochloric acid, sodium thiosulphate and potassium iodide was found to be optimum for on-line reduction. When the sorbent extraction is carried out without and with the addition of the reduction mixture, arsenic(III) and total arsenic can be determined sequentially by graphite furnace atomic absorption spectrometry with detection limits (3 σ) of 0.32 ng for As(III) and 0.43 ng for total arsenic. A 7.6-fold enhancement in peak area compared to direct injection of 40 μl samples was obtained after 60 s preconcentration. Results obtained for sea water standard reference materials, using aqueous standards for calibration, agree well with certified values. A precision of 5.5% RSD was obtained for total arsenic in a sea water sample (1.65 As). Results obtained for synthetic mixtures of trivalent and pentavalent arsenic agreed well with expected values.