Prediction of aqueous solubility of drugs and pesticides with COSMO-RS

The COSMO-RS method, originally developed for the prediction of liquid-liquid and liquid-vapor equilibrium constants based on quantum chemical calculations, has been extended to solid compounds by addition of a heuristic expression for the Gibbs free energy of fusion. By this addition, COSMO-RS is now capable of a priori prediction of aqueous solubilities of a wide range of typical neutral drug and pesticide compounds. Only three parameters in the heuristic expression have been fitted on a data set of 150 drug-like compounds. On these data an rms deviation of 0.66 log-units was achieved. Later, the model was tested on a set of 107 pesticides, which have been critically selected based on two experimental data sources and by a crosscheck with an independent HQSAR model. On this data set an rms of 0.61 log-units was achieved, without any adjustments to the structurally extremely diverse pesticides. This result verifies the ability of this extended COSMO-RS to predict aqueous solubilities of drugs and pesticides of almost arbitrary structural classes. The new method is COSMO-RSol.     

The structure of magnesium alanate

Mg(AlH(4))(2) was produced as a nanocrystalline powder by metathesis of NaAlH(4) and MgCl(2). Starting with a structure estimation which was developed from an evaluation of FTIR data and comparison of structural properties of two solvent adducts, quantum chemical calculations were performed on the density functional theory (DFT) level. The calculated atomic positions were used to simulate an X-ray powder diffraction pattern, based on a trigonal unit cell. The simulated pattern was congruent to experimental data. Thus, magnesium alanate exhibits a CdI(2) layer structure, the layers being formed by Mg atoms occupying the Cd sites and AlH(4) tedrahedra occupying the sites of the iodine atoms in CdI(2).     

First total synthesis of (+/-)-strychnofoline via a highly selective ring-expansion reaction

An efficient synthesis of the antitumor alkaloid (+/-)-strychnofoline is documented. Key to the development of the highly convergent strategy delineated is the coupling of a cyclic imine with spiro[cyclopropan-1,3'-oxindole], which takes place in a highly diastereoselective manner. The ability to conduct annulation reactions of spirocyclopropyloxindoles with functionalized cyclic imines provides new avenues for the preparation of this important class of biologically active structures.     

New Applications of Polyfunctional Organometallic Compounds in Organic Synthesis Frequently used abbreviations are defined at the end of the article

In the second half of the twentieth century much effort was invested in the preparation of highly reactive polar organometallic reagents. The high reactivity of these reagents precluded the presence of many functional groups and often good chemoselectivities and stereoselectivities could only by achieved by transmetalation reactions. The synthesis of increasingly complex target molecules and the desire to avoid tedious protection-deprotection steps has led inevitably to the use of functionalized organometallic reagents in retrosynthesis. In the last fifteen years, the generation of organic derivatives of numerous metals and metalloids (Li, Mg, B, Zn, Sn) was investigated. In this review the most important preparations and applications of organometallic reagents in organic synthesis will be covered, with particular emphasis on organozinc reagents.     

Metalloid aluminum and gallium clusters: element modifications on the molecular scale?

As members of the same group in the periodic table, the industrially significant elements aluminum and gallium exhibit strong similarities in the majority of their compounds. In contrast there are significant differences in the structures of the two elemental forms: Aluminum forms a typical closest-packed metallic structure whereas gallium demonstrates a diversity of molecular bonding principles in its seven structural modifications. It can therefore be expected that differences between Al and Ga compounds will arise when, as for the elemental forms, many metal-metal bonds are formed. To synthesize such cluster compounds, we have developed the following synthesis procedure: Starting from gaseous monohalides at around 1000 degrees C, metastable solutions are generated from which the elements ultimately precipitate by means of a disproportionation reaction at room temperature. On the way to the elemental forms, molecular Al and Ga cluster compounds can be obtained by selection of suitable ligands (protecting groups), in which a core of Al or Ga atoms are protected from the formation of the solid element by a ligand shell. Since the arrangement of atoms in such clusters corresponds to that in the elements, we have designated these clusters as metalloid or elementoid. In accordance with the Greek word [see text] (ideal, prototype), the atomic arrangement in metalloid clusters represents the prototypic or ideal atomic arrangement in the elements at the molecular level. The largest clusters of this type contain 77 Al or 84 Ga atoms and have diameters of up to two nanometers. They hold the world record with respect to the naked metal-atom core for structurally characterized metalloid clusters.     

Preparation of a molecularly imprinted polymer for the solid-phase extraction of scopolamine with hyoscyamine as a dummy template molecule

Molecularly imprinted polymers (MIPs) selective for scopolamine were produced using hyoscyamine (a close structural analogue) as template molecule. The produced polymers were used as media for solid-phase extraction, exhibiting selective binding properties for the analyte from biological samples. Human and calf urine and serum were processed on the MIP under various extraction protocols. The best performance was observed after loading the analyte in aqueous environment facilitating retention on the MIP by non-selective hydrophobic interactions. The MIPs were subsequently washed using an optimised solvent system to enable selective desorption of the analyte. Other related and non-related compounds were accessed to evaluate molecular recognition properties. Recoveries of up to 79% were achieved for the analyte of interest from biological samples.     

Writing with DNA and protein using a nanopipet for controlled delivery

We present a new, general method for the controlled deposition of biological molecules on surfaces, based on a nanopipet operating in ionic solution. The potential applied to the pipet tip controls the flux of biological molecules from the pipet, allowing fine control of the delivery rate. We used the ion current to control the distance of the pipet from the surface of a glass slide and deposited the fluorescently labeled DNA or protein G at a defined location onto the surface. Features of 830 nm size were obtained by depositing the biotinylated DNA onto a streptavidin surface; 1.3 mum size spots were obtained by depositing protein G onto a positively charged glass surface.     

Investigation of the enzymatic and nonenzymatic cope rearrangement of carbaprephenate to carbachorismate

The dimethyl esters of carbaprephenate and 4-epi-carbaprephenate were prepared by modification of published procedures. In methanol these compounds are converted quantitatively to isomeric 6-hydroxytricyclo[3.3.1.0(2,7)]non-3-en-1,3-dimethyl esters via a two-step sequence involving an initial Cope rearrangement, followed by intramolecular Diels-Alder reaction of the dimethyl carbachorismate or 4-epi-carbachorismate intermediates. Carbaprephenate and its epimer were obtained by alkaline hydrolysis of the corresponding dimethyl esters. These compounds, in contrast to their ester precursors, undergo spontaneous acid-catalyzed decarboxylation in aqueous solution. Only at high pH does the Cope rearrangement compete with decarboxylation. At pH 12 and 90 degrees C, carbaprephenate slowly rearranges to carbachorismate, which rapidly loses water to give 3-(2-carboxyallyl)benzoic acid as the major product. A small amount of the intramolecular Diels-Alder adduct derived from carbachorismate is also observed by NMR as a minor product. Carbaprephenate is not a substrate for the enzyme chorismate mutase from Bacillus subtilis (BsCM), nor does carbaprephenate inhibit the normal chorismate mutase activity of this enzyme, even when present in 200-fold excess over chorismate. Its low affinity for the enzyme-active site is presumably a consequence of placing a methylene group rather than an oxygen atom proximal to the essential cationic residue Arg90. Nevertheless, BsCM variants that lack this cation (R90G and R90A) do not accelerate the Cope rearrangement of carbaprephenate either, and a catalytic antibody 1F7, which exhibits modest chorismate mutase activity, is similarly inactive. Poor substrate binding and the relatively high barrier for the Cope compared to the Claisen rearrangement presumably account for the lack of detectable catalysis. Acceleration of this sigmatropic rearrangement apparently requires more than an active site that is complementary in shape to the reactive substrate conformer.     

Impact of adsorption isotherm parameters on the performance of enantioseparation using simulated moving bed chromatography

Often there are several chromatographic systems, i.e., combinations of mobile and stationary phases, available to solve a certain separation problem. Essential differences of these chromatographic systems are the separation factors and the efficiencies. For preparative applications in addition also the column saturation capacities and solubility limits are of importance. The impact of all these parameters appears to be rather well understood for conventional overloaded elution chromatography using a single column. In the last years the continuous simulated moving bed (SMB) process was increasingly used as a powerful alternative to batch elution since increased productivities and reduced solvent consumptions could be realised. However, the selection of suitable chromatographic systems is more sophisticated for this process. In this paper five different chromatographic systems capable of separating the enantiomers of mandelic acid are compared based on the achievable productivities using SMB chromatography. For these five systems the adsorption isotherms have been determined experimentally. Subsequently, an analysis of the SMB process was performed numerically using a well-established model.     

Rotational fluctuations of water inside the nanopores of SBA-type molecular sieves

The rotational molecular dynamics of water confined to nanoporous molecular sieves of a regular hexagonal (SBA-15) and of a foamlike pore structure was studied by dielectric spectroscopy in the frequency range from 10(-2) to 10(9) Hz and in a broad temperature interval. Two relaxation processes were observed: the process at lower frequencies is related to water molecules forming a layer, which is strongly adsorbed at the pore surface, whereas the relaxation process at higher frequencies is assigned to fluctuations of water molecules situated close to the center of the pore. The relaxation times of the low-frequency process for both materials and of the high-frequency process for the SBA-15 material have an unusual saddlelike temperature dependence, reported here for the first time. To describe this temperature dependence, a model developed for water confined to nanoporous glasses by Ryabov et al. [J. Phys. Chem. B 2001, 105, 1845] was applied, which considers two competing effects. The characteristic features of these two competing processes were compared with those reported for other porous systems.