Metal Oxoclusters as Molecular Building Blocks for the Development of Nanostructured Inorganic–Organic Hybrid Thin Films

Silica-based inorganic–organic hybrid thin films embedding the organically modified oxohafnium clusters (Hf₄O₂(OMc)₁₂, OMc=OC(O)–C(CH₃)=CH₂) were obtained by photo-activated free radical copolymerisation of the methacrylate groups of the cluster with those of the pre-hydrolysed (methacryloxypropyl)trimethoxysilane (MAPTMS, (CH₂=C(CH₃)C(O)O)(CH₂)₃Si(OCH₃)₃). By this route, a covalent anchoring of the cluster to the forming silica network was achieved. Samples characterized by two different Si/Hf compositions (18:1, 5:1) were prepared. The surface and in-depth composition of the thin films were investigated through Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). XPS depth profiles performed on the thin layers evidenced a homogenous in depth distribution of the hafnium guest species within the whole silica films and sharp film-substrate interfaces. Broad band dielectric spectroscopy (BDS) measurements permitted to investigate the electric response of the obtained films in the frequency and temperature range of 40 Hz – 1 MHz and 0–160°C.     

New aspects of the electroadsorption of ethyl xanthate on copper electrodes

The interaction of the ethyl xanthate (EX) anion with a copper electrode in a borate buffer solution, pH 9.2, has been investigated by cyclic voltammetry (CV), electrochemical quartz crystal microbalance (EQCM), electrochemical impedance spectroscopy (EIS), and measurements of contact angle (CA) under controlled potential. The results obtained allow establishing that, in the potential range from -0.80 and -0.60 V, two parallel reactions were characterized. These reactions were the ethyl xanthate electroadsorption and the hydrogen evolution reaction (HER). This last reaction has not been described by previous authors. Besides, the EIS measurements show that the mechanism of the HER on copper electrodes is not affected by the presence of a ethyl xanthate species. The EQCM study shows that in the electrodesorption process the departure of each ethyl xanthate species from the copper electrode is accompanied with the simultaneous entry of four to five water molecules. This fact is in accordance with the number of copper atoms involved in the adsorption of one ethyl xanthate species.     

Hexaruthenium carbonyl cluster complexes with basal edge-bridged square pyramidal metallic skeleton: efficient synthesis of 2-imidopyridine derivatives and determination of their reactive sites in carbonyl substitution reactions

The reactions of [Ru(3)(CO)(12)] with half equivalent of 2-amino-6-methylpyridine (H(2)ampy) or 2-aminopyridine (H(2)apy) in refluxing xylene give the hexanuclear products [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-L)(mu-CO)(2)(CO)(14)] (L = ampy, 1; apy, 2). These reactions represent the first high-yield syntheses of hexanuclear complexes with a basal edge-bridged square pyramidal metallic skeleton. Five metal atoms of these complexes are bridged by the N-donor ligand in such a way that the edge-bridging metal atom is attached to the pyridine nitrogen, while the basal atoms of the square pyramid are capped by an imido fragment that arises from the activation of both N-H bonds of the NH(2) group. The reactive sites of these complexes in CO substitution reactions have been determined by studying the reactivity of 1 with triphenylphosphine. Two kinetically controlled monosubstitutions take place on the edge-bridging metal atom in positions cis to the pyridine nitrogen, leading to a mixture of two isomers of formula [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(13)(PPh(3))] (3 and 4). On heating at 80 degrees C, these monosubstituted isomers are transformed, via a dissociative pathway, into the product of thermodynamic control (5), which has the PPh(3) ligand on the apical Ru atom. The di- and trisubstituted derivatives [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(12)(PPh(3))(2)] (6) and [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(11)(PPh(3))(3)] (7) are stepwise formed from 3-5 and PPh(3). Compound 6 has the PPh(3) ligands on the edge-bridging and apical Ru atoms, and compound 7 has an additional PPh(3) ligand on an unbridged basal Ru atom. The compound [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(12)(mu-dppm)] (8), in which a basal and the apical Ru atoms are spanned by the dppm ligand, has been isolated from the reaction of 1 with bis(diphenylphosphino)methane.     

DNA-templated assembly of nanoscale wires and protein-functionalized nanogap contacts

The use of DNA to template the assembly of nanoscale wires and protein-functionalized nanogap contacts is described: Specifically, the use of DNA to template the assembly of gold nanowires between conventionally patterned gold contacts on a silicon wafer substrate. Also described is the use of DNA to template the assembly of protein-functionalized nanogap gold contacts on a silicon wafer substrate. Of particular significance is the finding that suitably modified gold nanoparticles recognize and bind selectively the protein-functionalized nanogap and are localized there.     

Über die Strukturaufklärung von (Hydroxy-oxo-cyclopentenyl)alkansäuren,den Aldolkondensationsprodukten von Dioxoencarbonsäuren aus Rinderleber

Structure Elucidation of (Hydroxy-oxo-cyclopentenyl)alkanoic Acids, the Aldol-Condensation Products of Dioxoene Acids from Cattle Liver During homogenization of cattle liver the highly instable dioxoene acids 13a , 13b , and 13c are formed. These acids cyclize in alkaline solution to yield pairs of stable (hydroxy-oxo-cyclopentenyl)alkanoic acids, which were isolated as methyl esters 4a / 5a , 4b / 5b , and 4c / 5c . The structures of these compounds were deduced from an enriched 3-mg mixture sample by microchemical reactions combined with a GC/MS analysis of the reaction products. Compound 13a was obtained as methyl ester by oxidation of the methyl ester of the corresponding F-acid with NaOCl. It was not possible to isolate 13a in pure form due to its high sensitivity. Instead of the methyl ester of 13a , 4a and 5a were isolated, of which the structures were established.     

Complexes of divalent nickel and copper with the Schiff base derived from 2-(2-aminophenyl)benzimidazole and benzaldehyde

Summary The reactions of divalent nickel and copper salts with the Schiff base derived from 2-(2-aminophenyl)benzimidazole and benzaldehyde, L, yield complexes of general formulae [CuL₂X₂] (X=Cl, Br, or ClO₄), [CuL(SO₄)], [CuL(SO₄)] · 4H₂O, and NiLX₂ (X=Cl, Br, or NCS).All the complexes have been characterized by elemental analyses, magnetic measurements, e.s.r. electronic and i.r. spectral studies. The results show that the Schiff base acts as bidentate ligand through the pyridine-like imine nitrogen of imidazole ring and the azomethine nitrogen. Tentative structures of the complexes are suggested.     

Solid-state photodimerization of steroid enones

Androst-4-ene-3,17-dione (1) and 17alpha-methyltestosterone (2) are dimerized in the solid-state by UV radiation. These substances were selected by a search in the CSD among the steroid enones presenting in the crystalline state an intermolecular short contact between a hydrogen alpha to a carbonyl group and the oxygen of an enone system. Dimerization occurs by transfer of the hydrogen to the oxygen and connection between the two involved carbons. Androst-4-ene-3,17-dione (1) affords dimer 3 and trimer 4, both formed by connection of the C-16 of a molecule with the C-3 of a near one. Irradiation of 17alpha-methyltestosterone (2) gives the isomeric trienones 5 and 6. These compounds are reasonably formed by dehydration of unisolated intermediate products 7 and/or 8 obtained by coupling of two molecules through a linkage between the C-2 and the C-3' carbons. The formation mechanisms of the photoproducts are satisfactory explained on the basis of the molecular arrangement of the monomers in the crystal state. Modeling of the dimeric molecules was done using molecular mechanics calculations. A single-crystal X-ray of the dimer of androst-4-ene-3,17-dione confirms the structural interpretation of spectral data. The conformer found in the solid-state agrees well with the results of molecular mechanics calculations.     

Linked crystallites in the conducting topmost layer of polymer bilayer films controlled by temperature: from micro- to nanocrystallites.

Temperature has great impact on the structure and size of the linked crystallites of the conducting topmost layer formed at the surface of a polycarbonate film via the reaction BEDT-TTF+IBr [BEDT-TTF=bis(ethylenedithio)tetrathiafulvalene]. We show that fine temperature control permits formation of a semiconducting topmost layer of alpha'-(BEDT-TTF)(2)(I(x)Br(1-x))(3) crystallites with either micro- or nanometre size, a result that opens a route to miniaturized conducting plastic materials.     

Multiple nitrene insertions into metal-sulfur bonds of dithiocarbamate complexes: synthesis of sulfido-amido and zwitterionic tetraamido complexes

The iodine(III) reagent, PhI[double bond, length as m-dash]NTs, acts as a source of the nitrene fragment NTs, which undergoes facile insertion into the metal-sulfur bonds of a range of dithiocarbamate complexes. Addition of two equivalents of PhI=NTs to [M(S(2)CNR2)2] affords sulfido-amido complexes [M{SC(NR2)SNTs}2](M=Ni, Cu), which insert two further nitrene fragments to afford zwitterionic tetraamido complexes [M{TsNSC(NR2)SNTs}2](M=Co, Ni, Cu). Crystallographic studies have been carried out on both types of complex allowing possible resonance hydrids of the new ligand types to be assessed.     

Experimental and theoretical study of the interaction of CO2 with alpha-Al2O3

Density functional molecular cluster calculations are combined with X-ray photoelectron spectroscopy (XPS), quadrupolar mass spectrometry (QMS), and diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy to investigate the interaction of CO2 with alpha-Al2O3 and partially reduced alpha-Al2O3. The electronic structure of the stoichiometric and partially reduced substrate, adsorbate geometries, chemisorption enthalpies, and adsorbate vibrational parameters are computed and discussed. Theoretical results agree quite well with experimental data and previous theoretical investigations. As far as the adsorbate-substrate interaction is concerned, the results of our calculations indicate that CO2 forms bidentate-chelating carbonate species. The bonding scheme of this surface complex implies a significant substrate-->adsorbate transfer of charge (from the occupied dangling bond of a surface Lewis base site into one component of the CO2 2 pi u LUMO) assisted by a definitely weaker adsorbate-->substrate donation (from one component of the CO2 1 pi g HOMO into an empty dangling bond of a surface Lewis acid site). Our estimate of the chemisorption enthalpy (-15 kcal/mol) agrees quantitatively with calorimetric data reported for CO2 adsorbed on high surface area alpha-alumina (-16.0 kcal/mol). [Mao, C.-F.; Vannice, M. A. Appl. Catal. A 1994, 111, 151.] According to XPS and QMS outcomes, theoretical results predict that the interaction of CO2 with partially reduced alpha-Al2O3 gives rise to the reduction of the adsorbate to CO and to the concomitant substrate reoxidation.