An alternative model for partly diffusion controlled cage recombination

We proposed a simple kinetc model in which a diffusional physical process and a chemical process of reaction in a cage occur simultaneously. Good agreement between experimental results and the kinetic model are found.

---

, . .

     

Improvement and simplification of synthesis of 3-aryloxy-1,2-epoxypropanes using solvent-free conditions and microwave irradiations. Relation with medium effects and reaction mechanism

Some 3-aryloxy-1,2-epoxypropanes, interesting as potential synthons in β-adrenergic receptor antagonists preparation, were obtained in excellent yields (65-96% within 2-17 min) by microwave activation (monomode system) using solid-liquid solvent-free phase transfer catalysis (PTC). The best results for the O-alkylation of some phenols with epichlorohydrin were obtained using TBAB and NaOH/K₂CO₃ (1:4 mol/mol) as phase transfer catalyst and more acceptable basic system, respectively. These new procedure is compared with classical methods. Significant specific microwave effect (non-purely thermal) was evidenced in all cases. They were discussed in terms of reaction medium and mechanism, taking into account the variations in polarity of the systems.     

Characterization of the pores in hydrous ferric oxide aggregates formed by freezing and thawing

Hydrous ferric oxides (HFO) are efficient sorbents for inorganic and organic pollutants and therefore have great potentials in environmental science and engineering applications. Freezing and thawing of HFO suspensions leads to the formation of dense HFO aggregates. It facilitates the handling and increases the drying rate of HFO. In this study, we used a combination of pycnometry, gas adsorption (N(2) gas, water vapor), and small-angle neutron scattering (SANS) to characterize the porosity and pore size distribution of dense HFO aggregates formed by freezing dialyzed HFO suspensions at -25 degrees C and thawing them at room temperature. The crystallinity of the HFO, which was a 2-line ferrihydrite, was not affected by this treatment. Wet sieving and laser diffraction analysis showed that the dense HFO aggregates had a unimodal size distribution with an average diameter of 235+/-35 microm. Increasing the freezing rate by cooling with liquid N(2) (-196 degrees C) resulted in much smaller aggregates with an average diameter of 20 microm. Adding NaNO(3) electrolyte to the HFO suspensions prior to freezing also resulted in the formation of smaller aggregates. The dense HFO aggregates formed at -25 degrees C had a porosity of 0.73+/-0.02 ll(-1). SANS revealed a unimodal size distribution of pores, with an average pore diameter of 2.0 nm. The diameter of the HFO crystallites was estimated by transmission electron microscopy to be 1.9+/-0.5 nm. Geometrical considerations taking into account the unit particle and average pore size suggest that the crystallites retain 1-2 layers of hydration water during the coagulation induced by freezing. Analysis by N(2) gas adsorption showed that drying the dense HFO aggregates induced a reduction in porosity by about 25% and shifted the pore size distribution to smaller diameters. Rewetting during water vapor adsorption did not induce significant changes of the aggregate structure. The specific surface area of the dry HFO aggregates was between 320 and 380 m(2)g(-1).     

Transfer assessment of fipronil residues from feed to cow milk

Fipronil, a phenylpyrazole insecticide introduced for pest control on a broad range of crops, can also affect non-target insects such as honeybees. More widely, non-target environment such as milk produced by dairy cows fed with maize silage from treated seeds (=silage T) can be affected. To assess the potential transfer of fipronil residues (sulfone, sulfide, fipronil, desulfinyl and amide), a methodology including gas chromatography coupled with tandem mass spectrometry (GC-MS/MS) analysis was developed and validated according to the 2002/657/EC decision, in order to reach a level of quantification below 0.1 μg L⁻¹ in milk and 0.1 μg kg⁻¹ in plants. Twelve dairy cows were fed with silage T during 4 months. Concentration of fipronil in treated seeds was estimated at 1 g kg⁻¹, whereas silage from these seeds contained 0.30 ± 0.05 μg kg⁻¹ of dry material of fipronil, 0.13 ± 0.03 μg kg⁻¹ of dry material of sulfone. Sulfide residues were below the limit of quantification. Silage from untreated seeds (=silage U) presented traces of fipronil and sulfone, respectively at 0.04 ± 0.06 and 0.02 ± 0.03 μg kg⁻¹ of dry material. Contribution of fipronil residues from supplies was insignificant. During administration of silage T, only sulfone residues were quantified in milk. The average concentration was 0.14 ± 0.05 μg L⁻¹. Before and after administration, sulfone residues were detected but not quantifiable (<0.025 μg L⁻¹). Our results suggest a transfer of fipronil from feed to milk under its sulfone form. Moreover, traces of fipronil residues in maize U, soya, wheat and straw show a diffuse contamination of this pesticide in the environment.     

Transient absorption spectra of 2-hydroxybenzophenone photostabilizers

Transient absorption spectra (400–600 nm) of 2-hydroxybenzophenone and the methyl methacrylate copolymer of 2-hydroxy, 3-allyl, 4,4'-dimethoxybenzophenone following 355 nm excitation (7–480 ps delay) are reported. A short-lived, 435 nm transient (τ ≈ 10 ps in CH₂Cl₂) for both molecules is assigned to the lowest excited singlet before internal proton transfer. Weaker, broad T-T absorption is observed after 480 ps.     

Charge injection and photooxidation of single conjugated polymer molecules

The complex, coupled mechanisms of charge transfer and oxidative damage in organic electronic devices (such as organic light-emitting diodes (OLED), solar cells, etc.) have been elucidated by a new technique that combines single-molecule spectroscopy with charge injection from a metal electrode. The experiments employed a sandwich device architecture (Au/TPD/MEH-PPV:PMMA/SiO2/ITO), essentially a modified OLED with a charge-blocking layer (SiO2) to suppress charge injection at the ITO electrode. The fluorescence (photoluminescence) of isolated MEH-PPV conjugated polymer molecules imbedded in the device was observed to exhibit diverse time- and electrical bias-dependent effects. These include: (i) fluorescence quenching due to interactions between MEH-PPV and holes in the TPD hole-transport layer; (ii) fluorescence quenching, or "photobleaching", due to chemical defects at MEH-PPV generated by photooxidation; and (iii) a novel process, reductive "repair" of the oxidative chemical defects by externally injected carriers. These results demonstrate a very different mechanism for photobleaching of organic conjugated materials than is generally assumed to operate and, furthermore, suggest an intimate relationship among photobleaching, charge transport, and persistent photoconductivity in organic materials.     

Pseudo cage effect in double energy transfer

In some systems, the donor of a triplet—triplet energy transfer can be sensitized in its singlet state through a singlet—singlet energy transfer (Dexter mechanism), where the donor is the acceptor of the triplet transfer itself. As a consequence an extra acceptor molecule in the triplet energy transfer is present in the vicinity of the donor, thus enhancing the efficiency of the transfer process. Experiments show clearly this effect and a diffusional model gives semi-quantitative agreement with the experimental data.     

Permeation liquid membrane for trace metal speciation in natural waters. Transport of liposoluble Cu(II) complexes

In this paper, the transport of Cu(II) in the presence of lipophilic Cu(II) organic complexes through permeation liquid membranes (PLMs) have been investigated. In natural waters, small organic compounds, which form liposoluble neutral complexes with Cu(II), are potentially toxic and bioavailable. Hence, to understand the role of liposoluble Cu(II) complexes in natural waters, four organic ligands: phthalic acid, bipyridyl, pyrocatechol and hydroxyquinoline, which form uncharged or lipophilic Cu(II) complexes, were tested. The results showed that the transport of lipophilic Cu(II) complexes through PLM depends on the lipophilicity of the complex. Applications of PLMs in natural waters are presented.     

Mean configurational distribution function for the steady state and stern-volmer representation

A slight discrepancy appears between the treatment of the steady state of diffusion controlled bimolecular quenching of excited species either by the pair model or by the continuum model. A simplifying assumption is pointed out which helps to solve the steady state case but which is responsible for the discrepancy. The error involved is of small importance considering the experimental accuracy.

---

- , . , , . , .

     

The synthesis of certain 11,14-dimethoxydeoxypodocarpic acid derivatives. an application to the synthesis of (+)-winterin from drimys winteri

This paper reports the synthesis of several 11,14-dimethoxydeoxypodocarpic acid derivatives from (+)-podocarpic acid. The synthesis of the naturally occurring sesquiterpene, (+)-winterin, from Drimys winteri illustrates a synthetic application of the 11,14-dimethoxy intermediates and establishes the absolute configuration for winterin.