Non-destructive and clean prediction of aviation fuel characteristics through Fourier transform-Raman spectroscopy and multivariate calibration

The combination of Fourier transform (FT)-Raman spectroscopy and partial least squares (PLS) regression is proposed to be used in off-line kerosene quality control. Here, six important physico-chemical properties have been studied: Abel flash point, initial boiling point (IBP), 10% of distilled sample, final boiling point (FBP), total percentage of aromatic compounds (% aromatics) and viscosity. The Raman spectra were obtained directly from standard 2 ml glass vials ( mm), using a Bruker RFS 100 FT-Raman spectrometer, equipped with a 1064 nm Nd:YAG laser and a Ge detector, in back-scattering mode and accumulating 25 scans (150 s acquisition time) with a laser power of 300 mW. All Raman spectra were unit normalized in order to avoid the influence of the laser power into the regression models. Different Raman shift spectral ranges have been evaluated, the 193.5-1688.1 cm⁻¹ region being the most satisfactory one. Corrected standard errors of prediction of 1.9, 2.3, 2.8 °C, 0.19 cSt and 0.7% were obtained for flash point, IBP, FBP, viscosity and % aromatics, respectively. The influences of the glass vials, sample positioning and laser power have been studied, as well.     

Determination Of Formaldehyde And Acetaldehyde Associated To Atmospheric Aerosols By HPLC

Abstract

A rapid new analytical protocol was developed for the determination of formaldehyde and acetaldehyde associated to atmospheric particulate matter, at ng/m³ levels. The aerosols were collected on glass fiber filters (8″×10″) at face velocities ranging from 15 m/min to 23 m/min. Aliquots of 15.4 cm² were sonicated, for 20 min, with 5.0 mL of 0,01% 2,4-dinitrophenylhydrazine (DNPH), 1 % phosphoric acid. The liquid phase was then filtered and the separation and quantification of the corresponding 2,4-dinitrophenylhidrazone (DNPHo) derivatives carried out by reverse phase HPLC. Acetonitrile:water (57:43, v/v) as mobile phase at 1.0 mL/min and absorbance detection at 350 nm and 365 nm for, respectively, formaldehyde-DNPHo (0.04 AUFS) and acetaldehyde-DNPHo (0.01 AUFS) were used. The precision for four different aliquots, from a 8″×10″ glass fiber filter, were under 0.04% for formaldehyde and 14.16 % for acetaldehyde. In Salvador, Bahia, Brazil, formaldehyde and acetaldehyde were determined, respectively, in the range of 6.8 ng/m³ to 27.3 ng/m³ and 9.1 ng/m³ to 54.6 ng/m³.     

Symmetry-breaking constraints for packing identical rectangles within polyhedra

Two problems related to packing identical rectangles within a polyhedron are tackled in the present work. Rectangles are allowed to differ only by horizontal or vertical translations and possibly 90° rotations. The first considered problem consists in packing as many identical rectangles as possible within a given polyhedron, while the second problem consists in finding the smallest polyhedron of a given type that accommodates a fixed number of identical rectangles. Both problems are modeled as mixed integer programming problems. Symmetry-breaking constraints that facilitate the solution of the MIP models are introduced. Numerical results are presented.     

Use of decomposition of portlandite in concrete fire as indicator of temperature progression into the material

In field structures affected by fire, the temperature progress through the material. The progression of temperature in the concrete material can be determined by simultaneous differential thermal analysis and thermogravimetry. Also, the analysis of the behaviour of concrete in real concrete, by different techniques, permits the corroboration of the hypothesis of cover calculation. In this study, the analysis of concrete exposed to a very severe fire is studied in order to corroborate the calculus hypothesis and to determine the progression of the temperature inside the affected structure. In this study, the potentiality of the thermal instrumental techniques is studied to determine the situation of the concrete exposed to fire. These results can be used to calculate the residual strength of the concrete structural elements. Also, other auxiliary techniques are used to have some supplementary information about the situation of the concrete exposed to fire. The results are based in concrete samples from a real fire in the Windsor Building in Madrid. The Windsor Building in Madrid was project in 1974 and built between 1975 and 1979. This building was severely damaged by a serious fire on the 12th of February 2005, which lasted approximately 12?h.     

Mass‐Spectrometric Observation of Counter Anion Production in SU‐8 Exposed to UV Light and its Use for Dill C Parameter Determination

Photopolymerization is a phenomenon that is the basis of much of today's microfabrication technology and intense research is conducted to improve its control and the characteristics of end products for a variety of applications. The design of microscopic structures often relies on the accurate knowledge and modeling of photopolymer's behavior upon exposure, i.e. the Dill parameters, for each radiation species of interest and therefore the development of flexible characterization techniques is of great importance. SU‐8 is a popular compound that is representative of a whole class that relies on cationic polymerization, where an acid is obtained via photolysis of an onium salt during exposure. Here we report on the observation of SbF₆^? via laser desorption mass spectrometry on SU‐8 exposed to UV light at the wavelength of 365 nm and demonstrate that the yield of this counter‐anion as a function of exposure is consistent with the Dill C parameter value available in the literature. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 967–972     

Gaps in the number of generators of monomial Togliatti systems

Let $I_{d,n}?k[x_0,?,x_n]$ be a minimal monomial Togliatti system of forms of degree d. In [4], Mezzetti and Miró-Roig proved that the minimal number of generators $\mu (I_{d,n})$ of $I_{d,n}$ lies in the interval $[2n+1,\left(\begin{array}{c}n+d?1\\ n?1\end{array}\right)]$. In this paper, we prove that for $n\ge 4$ and $d\ge 3$, the integer values in $[2n+3,3n?1]$ cannot be realized as the number of minimal generators of a minimal monomial Togliatti system. We classify minimal monomial Togliatti systems $I_{d,n}?k[x_0,?,x_n]$ of forms of degree d with $\mu (I_{d,n})=2n+2$ or 3n (i.e. with the minimal number of generators reaching the border of the non-existence interval). Finally, we prove that for $n=4$, $d\ge 3$ and $\mu \in [9,\left(\begin{array}{c}d+3\\ 3\end{array}\right)]?\{11\}$ there exists a minimal monomial Togliatti system $I_{d,n}?k[x_0,?,x_n]$ of forms of degree d with $\mu (I_{n,d})=\mu$.