Resolution of benzo[a]pyrene in complex mixtures of other polycyclic aromatic hydrocarbons. Comparison of two spectrofluorimetric methods applied to water samples

Two spectrofluorimetric methods, second-derivative constant-energy synchronous luminescence (SDCESL) and constant-wavelength synchronous luminescence (CWSL) in combination with multiple linear regression (MLR), for the quantification of benzo[a]pyrene (BaP) at sub-ng mL-1 levels, in the presence of benzo[b]fluoranthene (BbFt), benzo[k]fluoranthene (BkFt), benzo[ghi]perylene (BghiP) and indeno[1,2,3-cd]pyrene (IP), were developed and compared in detail. SDCESL presents lower limits of detection and quantification than CWSL/MLR and also gives more exact and precise results for levels close to the quantification limit. For BaP, SDCESL achieved quantification limits of 0.019 ng mL-1 in river waters and 0.007 ng mL-1 in drinking waters. This work offers a sensitive, precise, accurate, rapid, simple and economic methodology for monitoring BaP in waters for public consumption, meeting all the requirements of the EC Directive 98/83/CE that fixes the maximum admissible limit for this polycyclic aromatic hydrocarbon in drinking waters at of 0.010 ng mL-1.     

The influence of water on the photophysical and photochemical properties of Piroxicam in AOT/iso-octane/water reversed micelles

The photophysical properties of Piroxicam , a nonsteroidal anti-inflammatory drug (NSAID), were investigated at different pH_ext values in reversed micelles of Aerosol-OT (AOT) in iso -octane, using both steady-state and picosecond time-resolved fluorescence spectroscopy. In contrast with the very complex data obtained in aqueous media, where several prototropic species are in equilibrium, the reversed micellar system essentially favors two species. The absorption spectra shows only one isosbestic point at λ= 348 nm. Excited-state intramolecular proton transfer (ESIPT), also detected in water, is promoted at low water pool contents measured by ω₀= [H₂O]/[AOT]. A strongly shifted (λ_em= 470 nm) tautomeric emission is found. Upon the gradual increase of ω₀, striking differences with pH_ext are found. At pH_ext= 4, the drug preferentially locates itself in the interfacial region partitioning between a hydrophobic and a hydrophilic domain. Global analysis was applied to the decay data and the results were interpreted by the "two-state excited-state" formalism. At pH_ext= 7, the anionic species is prevalent and the probe locates itself deeper inside the water core of the reversed micelles. Thus, a strong dependence on water content is detected, approaching a behavior similar to that observed in free aqueous solutions.     

Characterisation of Sugar Cane Combustion Particles in the Araraquara Region, Southeast Brazil

Biomass burning is an important primary and secondary source of aerosol particles. The presence of carbonaceous particles in the respirable size range makes the study of this fraction important in view of possible health and climatic effects. The annual burning of sugar cane plantations causes emission of huge amounts of pyrogenic particles. Aerosol samples were collected in Araraquara city, São Paulo state, Brazil, during the harvest season for fine and coarse particles and bulk; they were analysed by electron-probe microanalysis, including facilities for low-Z element determination (low-Z EPMA) and by energy-dispersive X-ray fluorescence (EDXRF), in order to investigate the elemental composition of individual particles and bulk samples, respectively. Numerical analysis of the EPMA results by hierarchical clustering shows high contributions of carbonaceous particles that can be distinguished mainly in two different types: biogenic and carbon-rich. Additionally, two significant contributions of aluminosilicate particles were identified: as rather pure aluminosilicates or mixed with carbonaceous species. The EDXRF results are compatible with those of aerosol particles in Amazon, which is nowadays one of the main sources of biogenic particles in the world.     

Molar excess heat capacities and volumes for mixtures of alkanoates with cyclohexane at 25°C

Molar excess volumes V ^E at 25°C have been determined by vibrating-tube densimetry, as a function of mole fraction x for different series of an alkanoate (H _2m+1 C _m COOC _n H _2n+1 )+cyclohexane. Three types of alkanoates were investigated, i.e., methanoates (m=0, with n=3 and 4), ethanoates (m=1, with n=2, 3, and 4) and propanoates (m=2, with n=1, 2, and 3). In addition, a Picker flow calorimeter was used to obtain molar excess heat capacities C _p ^E at constant pressure at the same temperature. V ^E is positive for all systems and rather symmetric, with V ^E (x=0.5) amounting to almost identical values in a series of mixtures containing an alkanoate isomer of same formula (say C₄H₈O₂, C₅H₁₀O₂, or C₆H₁₂O₂). The composition dependence of C _p ^E is rather unusual in that two more or less marked minima are observed for most of the mixtures, especially when the alkanoate is a methanoate or an ethanoate. These results are discussed in terms of possible changes in conformation of both the ester and cyclohexane.     

Investigation of thermal decomposition reactions by means of thermal analysis and dielectric constant measurement

Dielectric constant measurements as a function of temperature and thermal analysis were performed in copper sulphate pentahydrate and sodium nitrite to study the nature of the decomposition reactions. The application of these combined techniques to the study of several possible mechanisms of thermal decomposition is advanced.     

Dissociation and solubility variation versus pO2- of scheelite CaWO4 in molten NaCl−KCl (At 1000 K)

The conditional solubility of scheelite CaWO₄ in molten NaCl?KCl (1:1) has been studied either in oxobasic or oxoacidic media. In the former case it is increased by formation of sparingly soluble CaO according to:Ca²⁺ + O²CaO(s), pK_s^CaO = 10800/T ? 5.8 (molality scale) In the later case, WO₄^2- behaves as an oxobase according to the following equilibria:WO₄^2?WO₃ (s) + O^2? pK₀ = 10.0 at 1000 K3 WO₄^2?W3O₁₀^2? pK₃ = 12.7 at 1000KThe latter equilibrium favours an increase in the W^VI solubility when pO^2- is increased, for instance by injection of HCl. The whole set of results has been summarized by a conditional solubility diagram of scheelite versus pO^2-.     

Synthesis of amberlite XAD-2-PC resin for preconcentration and determination of trace elements in food samples by flame atomic absorption spectrometry

A new chelating sorbent has been developed using Amberlite XAD-2 resin anchored with pyrocatechol through –N=C– group. This sorbent, characterised by elemental analysis and infrared (IR) spectra, was used as packing for the minicolumn in an on-line system preconcentration system for cadmium, cobalt, copper and nickel determination. Metal ions were sorbed in the minicolumn, from which it could be eluted directly to the nebulizer–burner system of the flame atomic absorption spectrometer (FAAS). Elution of all metals from minicolumn can be made with 0.50 mol L^− 1 HCl or HNO₃. The enrichment factors obtained were 16 (Cd), 24 (Co), 15 (Cu) and 19 (Ni), for 60 s preconcentration time, and 39 (Cd), 69 (Co), 36 (Cu) and 41 (Ni), if used 180 s preconcentration time. Under the optimum conditions, the proposed procedure allowed the determination of cadmium, cobalt, copper and nickel with detection limits of 0.31, 0.32, 0.39 and 1.64 μg L^− 1, respectively, when used preconcentration periods of 180 s. The accuracy of the developed procedure was sufficient and evaluated by the analysis of the certified reference materials NIST 1515 apple leaves and NIST 1570a spinach leaves. The method was applied to the analysis of food samples (spinach, black tea and rice flour).     

Multivariate optimisation of the experimental conditions for determination of three methylxanthines by reversed-phase high-performance liquid chromatography

Caffeine (1,3,7-trimethylxanthine), theobromine (3,7-dimethylxanthine) and theophylline (1,3-dimethylxanthine) are the most important naturally occurring methylxanthines. Caffeine is a constituent of coffee and other beverage and included in many medicines. Theobromine and theophylline are formed as metabolites of caffeine in humans, and are also present in tea, cocoa and chocolate products.

In order to improve the chromatographic resolution (R_s) with a good analysis time, experimental designs were applied for multivariate optimisation of the experimental conditions of an isocratic reversed-phase high-performance liquid chromatographic (RP-HPLC) method used for the simultaneous determination of caffeine, theobromine and theophylline. The optimisation process was carried out in two steps using full three-level factorial designs. The factors optimised were: flow rate and mobile phase composition. Optimal conditions for the separation of the three methylxanthines were obtained using a mixture of water/ethanol/acetic acid (75:24:1%, v/v/v) as mobile phase and a flow rate of 1.0 mL min⁻¹. The RP-HPLC/UV method was validated in terms of limit of detection (LOD), limit of quantitation (LOQ), linearity, recovery and the precision, calculated as relative standard deviation (R.S.D.). In these conditions, the LOD was 0.10 μg L⁻¹ for caffeine, 0.07 μg L⁻¹ for theobromine and 0.06 μg L⁻¹ for theophylline. The proposed method is fast, requires no extraction step or derivatization and was suitable for quantification of these methylxanthines in coffee, tea and human urine samples.     

On the grade of some ideals

An additivity formula is obtained for the grade of an ideal in a residue ring R/I, where I is a perfect ideal. This result is then applied to compute the grade of ideals of linear (inhomogeneous) polynomials. Further results on the homological rigidity of the conormal module I/I² are pointed out. Finally, an elementary proof is given of a result of Buchsbaum concerning the grade of ideals of minors of a matrix.Partially supported a CNPq grantPartially supported by NSF and CNPq grants