Elaboration in technical areas

The note presents elaboration techniques that can be used to provide feeling for basic material. It is argued that elaboration is an important consideration in dealing with different learning styles.     

Plant-mediated asymmetric reduction of 1-(3,4-dimethylphenyl)ethanone

Bioreduction mediated by plants is a highly selective and environmentally friendly approach to synthesise optically active alcohols. Herein the bioreduction of 1-(3,4)-dimethylphenyl)ethanone to the corresponding chiral alcohol 1-(3,4-dimethylphenyl)ethanol has been evaluated using nine different vegetables roots as biocatalysts. The chiral alcohol was prepared in yields ranging from 44.1% to 88.2%, and with enantiomeric excess up to 97.2% for the (S)-enantiomer. Sugar beet was the most promising among the tested vegetables roots. Therefore, sugar beet cell cultures (normal and transformed) were obtained and tested for the reduction as well, yielding the corresponding alcohol in the range from 62.1% to 88.2% yield and with enantiomeric excesses of >99%. Based on these results reported, there are no profound differences in the reductive capacity of undifferentiated cells and organs of the same plant species (sugar beet). Due to overall advantages of using cell cultures, we have highlighted this approach as a promising method for preparation of enantiomerically pure 1-(3,4-dimethylphenyl)ethanol.     

Survey of low-level endocrine disrupting pesticides in food matrices in Slovakia

The search on endocrine disrupting chemicals (EDCs) in non-fatty food was evaluated. A fast, high-throughput, accurate, multiresidue method for the analysis of selected EDC pesticides in fruit and vegetable food samples was developed. The QuEChERS technique was used for sample preparation. Fast GC-MS was performed with a narrow-bore capillary column and a quadrupole benchtop detector with electron ionization (EI) and negative chemical ionization (NCI). A part of the work was devoted to the comparison of NCI versus EI approach concerning the sensitivity of detection and to the study of selectivity enhancement in NCI mode. Matrix-matched standard solutions were utilized for calibration. The methods validation was performed. Fortification studies at 1, 5, 10 and 250?µg?kg^?1 for 35 pesticides in EI mode and 0.1, 1, 5 and 250?µg?kg^?1 for 28 pesticides in NCI mode were performed. Average recoveries for each fortification level ranged from 70 to 110% with >80% of recoveries between 90 and 110%. Limits of quantification (LOQs) were established at 5?µg?kg^?1 for EI and at 1?µg?kg^?1 for NCI mode, which is lower than the lowest maximum residue level (MRL) value set by the European Commission in fruit and vegetables. The developed and validated fast GC-MS method was successfully applied to the search of EDC pesticides at ultratrace concentration level in real fruit and vegetable samples in Slovakia. Thirty-four samples of 20 different commodities were analyzed. Seven samples contained residues of three or more EDCs pesticides.     

Renormalization of composite operators in gauge theories

We give a logically complete treatment of the renormalization of composite operators in gauge theories.     

Soluble complexes in aqueous mixtures of low charge density comb polyelectrolyte and oppositely charged surfactant probed by scattering and NMR

A low charge density polyelectrolyte with a high graft density of 45 units long poly(ethylene oxide) side-chains has been synthesized. In this comb polymer, denoted PEO(45)MEMA:METAC-2, 2 mol% of the repeating methacrylate units in the polymer backbone carry a permanent positive charge and the remaining 98 mol% a 45 unit long PEO side-chain. Here we describe the solution conformation of this polymer and its association with an anionic surfactant, sodium dodecylsulfate, SDS. It will be shown that the polymer can be viewed as a stiff rod with a cross-section radius of gyration of 29 A. The cross section of the rod contracts with increasing temperature due to decreased solvency of the PEO side-chains. The anionic surfactant associates to a significant degree with PEO(45)MEMA:METAC-2 to form soluble complexes at all stoichiometries. A cooperative association is observed as the free SDS concentration approaches 7 mM. At saturation the number of SDS molecules associated with the polymer amounts to 10 for each PEO side-chain. Two distinct populations of associated surfactants are observed, one is suggested to be molecularly distributed over the comb polymer and the other constitutes small micellar-like structures at the periphery of the aggregate. These conclusions are reached based on results from small-angle neutron scattering, static light scattering, NMR, and surface tension measurements.     

Evaluation of Zn2+- and Cu2+-Binding Affinities of Native Cu,Zn-SOD1 and Its G93A Mutant by LC-ICP MS

The tight binding of Cu and Zn ions to superoxide dismutase 1 (SOD1) maintains the protein stability, associated with amyotrophic lateral sclerosis (ALS). Yet, the quantitative studies remain to be explored for the metal-binding affinity of wild-type SOD1 and its mutants. We have investigated the demetallation of Cu,Zn-SOD1 and its ALS-related G93A mutant in the presence of different standard metal ion chelators at varying temperatures by using an LC-ICP MS-based approach and fast size-exclusion chromatography. Our results showed that from the slow first-order kinetics both metal ions Zn²⁺ and Cu²⁺ were released simultaneously from the protein at elevated temperatures. The rate of the release depends on the concentration of chelating ligands but is almost independent of their metal-binding affinities. Similar studies with the G93A mutant of Cu,Zn-SOD1 revealed slightly faster metal-release. The demetallation of Cu,Zn-SOD1 comes always to completion, which hindered the calculation of the K_D values. From the Arrhenius plots of the demetallation in the absence of chelators ΔH^‡ = 173 kJ/mol for wt and 191 kJ/mol for G93A mutant Cu,Zn-SOD1 was estimated. Obtained high ΔH values are indicative of the occurrence of protein conformational changes before demetallation and we concluded that Cu,Zn-SOD1 complex is in native conditions kinetically inert. The fibrillization of both forms of SOD1 was similar.     

Mucin-chitosan complexes at the solid-liquid interface: multilayer formation and stability in surfactant solutions

The adsorption of a biologically important glycoprotein, mucin, and mucin-chitosan complex layer formation on negatively charged surfaces, silica and mica, have been investigated employing ellipsometry, the interferometric surface apparatus, and atomic force microscopy techniques. Particular attention has been paid to the effect of an anionic surfactant sodium, dodecyl sulfate (SDS), with respect to the stability of the adsorption layers. It has been shown that mucin adsorbs on negatively charged surfaces to form highly hydrated layers. Such mucin layers readily associate with surfactants and are easily removed from the surfaces by rinsing with solutions of SDS at concentrations > or =0.2 cmc (1 cmc SDS in 30 mM NaCl is equal to 3.3 mM). The mucin adsorption layer is negatively charged, and we show how a positively charged polyelectrolyte, chitosan, associates with the preadsorbed mucin to form mucin-chitosan complexes that resist desorption by SDS even at SDS concentrations as high as 1 cmc. Thus, a method of mucin layer protection against removal by surfactants is offered. Further, we show how mucin-chitosan multilayers can be formed.     

Normal and friction forces between mucin and mucin-chitosan layers in absence and presence of SDS

Employing the colloidal probe AFM technique we have investigated normal and friction forces between flat mica surfaces and silica particles coated with mucin and combined mucin-chitosan layers in presence and absence of anionic surfactant, SDS, in 30 mM NaCl solution. We have shown that the normal interactions between mucin coated mica and silica surfaces are dominated by long-range steric repulsion on both compression and decompression. Friction forces between such mucin layers are characterized by a low effective friction coefficient, mu(eff)=0.03+/-0.02, which is lower than the value of 0.13+/-0.02 observed when chitosan layers were adsorbed. Forces between combined mucin-chitosan layers have also been measured. Adsorption of chitosan on mucin results in considerable compaction of the layer, and development of attractive forces detectable on separation. Friction between mucin-chitosan layers in 30 mM NaCl solution is high, with mu(eff) approximately 0.4. Adsorption of additional mucin to this layer results in no improvement with respect to lubrication as compared to the mucin-chitosan layer, and mu(eff) approximately 0.4 is observed. We argue that the layers containing both mucin and chitosan are not strictly layered but rather strongly entangled. As a result attractive interactions between oppositely charged moieties of sialic acid residues from mucin and amine groups from chitosan residing on the opposing surfaces contribute to the increased friction. The effects of SDS on normal and friction forces between combined mucin-chitosan layers were also investigated. The relation between surface interactions and friction properties is discussed.     

Cancellation of energy divergences in Coulomb gauge QCD

Electroweak unification is obtained in anSU(7) model at a mass scale 3×10¹⁰≦M≦3×10¹⁶ GeV's, with left-right symmetric subgroups and sin² θ _w (M)=3/8. BelowM, the model reduces toSU(3) _L ×SU(3) _R , the flavor sector of the “trinification theory” of Glashow et al., or of theE ₆ grand unified theory. This model predicts a natural massless neutrino, and fractionally charged leptons with masses in theM regime.     

Synthesis of Carbon–Nitrogen–Phosphorous Materials with an Unprecedented High Amount of Phosphorous toward an Efficient Fire‐Retardant Material

Phosphorus incorporation into carbon can greatly modify its chemical, electronic, and thermal stability properties. To date this has been limited to low levels of phosphorus. Now a simple, large‐scale synthesis of carbon–nitrogen–phosphorus (CNP) materials is reported with tunable elemental composition, leading to excellent thermal stability to oxidation and fire‐retardant properties. The synthesis consists of using monomers that are liquid at high temperatures as the reaction precursors. The molten‐state stage leads to good monomer miscibility and enhanced reactivity at high temperatures and formation of CNP materials with up to 32 wt % phosphorus incorporation. The CNP composition and fire‐retardant properties can be tuned by modifying the starting monomers ratio and the final calcination temperature. The CNP materials demonstrate great resistance to oxidation and excellent fire‐retardant properties, with up to 90 % of the materials preserved upon heating to 800 °C in air.