Novel electroanalytical techniques for pollution analysis

Summary Two new analytical techniques are described. The so-called injection technique operates on evaluating a dynamic concentration signal as a result of following the concentration change in a certain part of a flow-through channel after injecting a sample or reagent at a small volume into the current of an appropriate solution flowing at a constant rate.The second technique, the programmed coulometric titration technique, also uses the flow-through channel principle; that means this novel technique allows the more precise titrimetric way of analysis in flowing solutions. In the case of both techniques potentiometric and voltammetric detectors were involved. Several examples proved the multifold advantages of these techniques for environmental analysis.

---

Neue elektroanalytische Verfahren für die Umweltanalyse

Zusammenfassung Zwei neue Methoden werden beschrieben. Die sog. Injektionstechnik wertet ein dynamisches Konzentrationssignal aus, das sich aus der Änderung in einem Durchflußkanal ergibt, wenn Probe oder Reagens in kleinen Volumina in einen konstant fließenden Flüssigstrom injiziert werden. Das zweite Verfahren, die programmierte coulometrische Titration, erlaubt die Anwendung der genaueren titrimetrischen Technik auf fließende Lösungen. Bei beiden Methoden werden potentiometrische und voltammetrische Detektoren verwendet. Mehrere Beispiele zeigen die vielfachen Vorteile dieser Verfahren bei der Anwendung auf die Analyse von Umweltmaterial.

Presented at the 6th Annual Symposium on Recent Advances in the Analytical Chemistry of Pollutants, April 21–23, 1976; Vienna, Austria     

Validation of an analytical method to determine trace metal impurities in fluoride compounds by flame atomic absorption spectroscopy

 The development of an analytical method for the determination of some heavy metals (Fe, Cu, Co, Zn and Ni) in fluoride compounds [Cu(BF₄)₂, Sn(BF₄)₂, Pb(BF₄)₂ and HBF₄] by flame atomic absorption spectroscopy is described. This method is to be used as a routine analytical method in an industrial quality control laboratory. To this end the "performance characteristics" of an instrumental analytical method such as matrix effects, sensitivity, linearity, detection and quantitation limits, precision and accuracy were evaluated for every system under study. The results of these investigations showed that non-spectral interferences (due to the presence of large concentrations of major metals such as Cu, Sn and Pb) were observed. Nevertheless it was possible to define a matrix concentration interval where matrix effects were not statistically significant, and therefore a direct calibration approach could be used as the calibration tool whenever the major metal concentration was not higher than 40×10^–3 kg l^–1. A guide to the developement of an analytical method for trace metal determination is provided. General tools for quality control have been used in order to show how an analytical method can be tested daily and evaluated in a convenient manner. Received: 29 January 1997 Accepted: 11 March 1997     

UV photoelectron spectra of 5- and 6-azauracil

The He(I) photoelectron spectra of 5-azauracil (1,3,5-triazine-2,4(1H,3H)-dione) and 6-azauracil (1,2,4-triazine-3, 5(2H,4H)-dione) are presented. The spectra are assigned by using INDO/S calculations and comparison arguments with uracil. The first ionization energy in the title compounds is higher than in the usual nucleic acid bases.     

Polarographic determination of pilocarpine using the catalysed pre-wave of nickel(II)

On the basis of a detailed study of the pilocarpine-induced nickel(II) pre-wave using various polarographic techniques, an electrode process mechanism is proposed in which the formation of a catalytic complex between aquo-nickel(II) and veronalate-nickel(II) on the one hand and unprotonated pilocarpine adsorbed on the electrode surface on the other is followed by the reduction of nickel(II) in the complex and the release of the catalytic ligand. The pre-peak recorded by differential-pulse polarography in the system 1 × 10^?3 M Ni(II)-1 × 10^?2 M sodium veronal, nitric acid (pH 8.5) (with ionic strength maintained at 0.2 with sodium nitrate) can be used for quantitative determination of pilocarpine at concentrations in the range 2.5 × 10^?7-8 × 10^?6 M.     

Electroviscous Effect in Dilute Suspensions of Alumina

A study on the electroviscous effect of alumina suspensions has been made. At the low volume fraction of the particles studied here only a first-order effect was detected. Ubbelohde-type capillary viscometers have been used. A simple method to determine the hydrodynamic constant k(1) has been proposed. The experimental primary electroviscous coefficients corresponding to different electrolyte concentrations have been compared with two different theoretical approachs (I. G. Watterson, and L. R. White, J. Chem. Soc. Faraday Trans. 2 77, 1115 (1981); F. J. Rubio-Hernández, E. Ruiz-Reina, and A. I. Gómez-Merino, J. Colloid Interface Sci. 206, 334 (1998)) and the results suggest that the presence of a dynamic Stern layer plays a certain role in this effect. Copyright 2000 Academic Press.     

Crystal structure oftrans-ethyl(1,5,6-trimethylbenzimidazole)-bis(dimethylglyoximato)cobalt(III). Relationships between structural and spectroscopic properties in compounds of the general formulae [Co(dmgH)2(R)(1,5,6-Me3Bzm)]

Summary The synthesis and x-ray crystal structure oftrans-[Co(dmgH)₂(Et)(1,5,6-Me₃Bzm)] where dmgH=dimethylglyoximate(–1), and 1,5,6-Me₃Bzm=1,5,6-trimethylbenzimidazole, is reported. The compound C₁₉H₂₆N₆O₄Co is monoclinic, space group P2₁/n;a=11.700(4);b=24.205(6);c=8.500(3) Å and =101.63(3)°. D(calcd) 1.299 g cm^–3; Z=4 and R=0.066 for 2359 independent reflections. Comparison of Co-N(axial ligand) bond lengths for compounds of general formulaetrans-[Co(dmgH)₂(R)(L)], with L=pyridine or 1,5,6-trimethylbenzimidazole and R=CH(CN)Cl, CH₂NO₂, Me, Et,i-Pr, cyclo-hexyl or adamantyl is made. The Co–N(1,5,6-Me₃Bzm) bond lengths of the trimethylbenzimidazole derivatives show a fairly linear relationship with the electronic parameter of the axial R group, derived from the¹³C-n.m.r. spectra of their pyridine analogues. The influence of steric effects on the properties of these Co^III compounds is discussed.     

On the reactivity of benzidinesulfonic acids and their applications in analysis: Reaction of cupric salts with o-benzidinemonosulfonic acid in presence of alkali thiocyanate

In the present work a new method for the detection of coppcr(II) is described. It is based on the reaction of this ion with the alkali salts of o-benzidinemonosulfonic acid, alkali thiocyanate being present. The sensitivity of this test is $\text{1}\text{500,000}$ (l0^-5.7); it ia specific for the Cu⁺² ion and can also be used to distinguish quickly the above-mentioned acid from the benzidine o-o'-disulfonic and benzidine m-m' '-disulfonic acids. It is believed that the mechanism of the reaction can be explained by an oxidation process.     

Derivatives of carbohydrazide,thiocarbohydrazide and diaminoguanidine as photometric analytical reagents. III

Summary An absorption method for the collection of acid and condensable volcanic gases is described. A Cd(OH)₂ suspension allows the simultaneous sampling of sulfide and sulfur dioxide. A complete scheme for chemical analysis of H₂O, CO₂, H₂S, SO₂, HCl and HF is presented.The method is relatively simple and accurate and requires only simple equipment. Moreover, separate samples of the condensable part of the volcanic gas may be used for analysis of trace elements.

---

Probenahme und Analyse vulkanischer Gase

Zusammenfassung Eine Absorptionsmethode zur Probenahme saurer und kondensierbarer Vulkangase wurde beschrieben. Eine Cd(OH)₂-Suspension ermöglicht die gleichzeitige Probenahme von H₂S und SO₂. Ein Analysenschema für die chemische Analyse von H₂O, CO₂, H₂S, SO₂, HCl und HF wurde angegeben. Das Verfahren ist relativ einfach und genau; es erfordert nur eine einfache Ausrüstung. Proben des kondensierbaren Anteils der Gase dienen zur Bestimmung der Spurenanteile.

     

Le problème de la réduction des intégrales électroniques dans la méthode L.C.A.O. améliorée

Résumé L'auteur reprend les principes de la méthode L.C.A.O. améliorée en vue d'une justification plus complète des procédés employés. La théorie des perturbations permet d'une façon simple de tenir compte de la corrélation entre les électrons grâce à l'introduction d'une fonction universelle de la distance entre deux électrons. Le problème est ainsi ramené de l'échelle moléculaire à l'échelle atomique. On montre que la corrélation entre les électrons entraîne la réduction des intégrales atomiques. Le problème de la réduction des intégrales coulombiennes est traité en détail. La possibilité de négliger les autres intégrales biélectroniques est ensuite examiné. Enfin est étudié le problème de la réduction des intégrales de coeur.

---

The principles of the improved LCAO theory are investigated to give a better justification for its methods. Perturbation theory allows a simple account for electronic correlation, when a universal function of interelectronic distance is introduced. The problem is hereby reduced from molecular to atomic scale. The reduction of electronic energy integrals by correlation is shown, especially for Coulomb integrals. The possibility of neglecting the other bielectronic integrals is examined. Finally the problem of core integral reduction is studied.

---

Zusammenfassung Die Grundlagen der verbesserten LCAO-Methode werden untersucht, um dieses Verfahren besser zu rechtfertigen. Mit einer allgemeinen Funktion des Abstandes je zweier Elektronen und der Störungstheorie läßt sich die Elektronenkorrelation auf einfache Weise berücksichtigen. Damit wird das Problem vom molekularen auf den atomaren Maßstab zurückgeführt. Die Elektronenkorrelation bringt eine Reduktion der Elektronenenergieintegrale mit sich; die Coulombintegrale werden im einzelnen behandelt. Anschließend wird die Möglichkeit untersucht, die übrigen Zweielektronenintegrale zu vernachlässigen. Schließlich wird die Reduktion der Rumpfintegrale behandelt.

---

---

Nous tenons à remercier très vivement le Docteur Chr. K. Jørgensen (Cyanamid European Research Institut, Genève) pour les intéressants échanges de vue que nous avons eu sur les divers problèmes évoqués dans cet article ainsi que le Docteur G. Berthier (Institut de Biochimie théorique, Paris) et Monsieur H. v. Hirschhausen.     

HPLC-Electrochemical detection with graphite-poly (tetrafluoroethylene) electrode Determination of the fungicides thiram and disulfiram

The suitability of composite graphite-poly(tetrafluoroethylene) (Teflon) electrodes as amperometric indicator electrodes in HPLC detection is demonstrated. The determination of the fungicides thiram and disulfiram in the presence of ziram has been chosen as an analytical problem. The optimization of working conditions, such as the choice of the organic solvent used in the mobile phase as well as its percentage, the potential applied to the composite electrode, and the time elapsed between mixing the carbamates and the injection, has been accomplished by using the wall-jet flow-cell configuration. The effect of the acetonitrile percentage used in the mobile phase on the retention of thiram, disulfiram, ziram and phenol was evaluated. Resolution up to the baseline can be achieved with 45% acetonitrile. The sensitivity of the determination of thiram and disulfiram in the presence of a constant concentration of ziram is slightly better when using a wall-jet cell; however, the background current is higher, as well as the baseline noise and the time necessary to achieve stabilization of the baseline before the injection. Lower limits of detection for both fungicides, as well as a better repeatability, were obtained when using a thin-layer flow cell configuration. As an application, the determination of thiram in spiked apple samples, at a level of 0.5 mg thiram kg(-1) apple, has been carried out with a mean recovery of 97 +/- 3% for a significance level of 0.05.