Chromatographic Framework to Determine the Enantiomer Binding Mechanism on Pepsin Protein Surface

This paper describes sodium chloride salt effects on both dansyl-D,L aminoacid derivatives-pepsin protein surface association and the selectivity process. The thermodynamic functions of this enantiomer association were determined. The variation plots of the enantiomer association data versus the sodium chloride salt concentration (x) in the bulk solvent indicated a change in both the enantiomer-pepsin association and selectivity mechanisms. Enthalpy-entropy compensation confirmed this observation. This study shows the importance of taking into account, the electrostatic interactions and the hydrophobic effect in order to determinate optimum conditions for enantiomeric separation in this chromatographic system.     

Ag(I) complexes with alkylidene-bis(2-aminopyrimidines) as building units for discrete metallomacrocyclic frames. A structural and solution study

Alkylidene-bis(2-aminopyrimidines) (pyr2Cx, x = 2-5) are useful ligands to interact with Ag(I) yielding discrete metallocycles. Crystal structures of the [(pyr2C2)Ag(NO3)]2 and [(H-pyr2C4)Ag(NO3)2]2 have been isolated where each macrocyclic moiety interacts with their surroundings through weak interactions, yielding 3D discrete structures, On the other hand, the solution study shows that the equilibrium constants for the formation of Ag(pyr2Cx)+ complexes are higher than the literature values for Ag(I) complexes with single pyrimidines, although the differences could be explained by invoking the solid-state structures of the Ag(I)-pyr2Cx complexes.     

Time-resolved measurements of intramolecular energy transfer in single donor/acceptor dyads

We have investigated electronic excitation energy transfer in a specifically designed bichromophoric donor/acceptor dyad in which the donor (perylenediimide) and acceptor (terrylenediimide) are linked by a rigid heptaphenyl-spacer. Because of the choice of the bridge, which defines the distance and orientation of the two chromophores, donor as well as acceptor emission is observed. The significantly smaller photostability of the donor allows for time-resolved measurements of the acceptor emission at the single-molecule level with and without energy transfer from the donor. By analyzing the differences of the rise/decay profiles for both pathways, we could determine time constants of energy transfer with high accuracy for single dyads. The results show that the experimental approach presented here works even for situations in which the energy transfer times are smaller than the temporal resolution of the detection system.     

Selective crystallization of calcium salts by poly(acrylate)-grafted chitosan

The biopolymer chitosan was chemically modified by grafting polyacrylamide or polyacrylic acid in a homogeneous aqueous phase using potassium persulfate (KPS) as redox initiator system in the presence of N,N-methylene-bis-acrylamide as a crosslinking agent. The influence of the grafted chitosan on calcium salts crystallization in vitro was studied using the sitting-drop method. By using polyacrylamide grafted chitosan as substrate, rosette-like CaSO4 crystals were observed. This was originated by the presence of sulfate coming from the initiator KPS. By comparing crystallization on pure chitosan and on grafted chitosan, a dramatic influence of the grafted polymer on the crystalline habit of both salts was observed. Substrates prepared by combining sulfate with chitosan or sulfate with polyacrylamide did not produce similar CaSO4 morphologies. Moreover, small spheres or donut-shaped CaCO3 crystals on polyacrylic acid grafted chitosan were generated. The particular morphology of CaCO3 crystals depends also on other synthetic parameters such as the molecular weight of the chitosan sample and the KPS concentration.     

A pyrimidine thiolate Rh(I) complex: structure, bonding and one-dimensional interactions in solid and in solution

The reaction of [Rh(micro-Cl)(COD)]2 with 4,6-dimethyl-pyrimidinethiolate (Me2-pymt) and subsequent substitution of COD by CO yields [Rh(Me2-pymt)(CO)2]. The stacking pattern found in this compound is in contradiction with previously studied comparable square-planar complexes of type d8-[M(chelate)(monodentate)2] in which each ligand has different pi-acidic character. A theoretical study of the intermolecular interactions and conformation of the title compound has been carried out, combining semi-empirical band calculations on the real chains and ab initio(MP2 level) calculations on a model dimer. The combination of electronic and steric effects determines the rotation of the successive monomers and the deviation from linearity of the one-dimensional stacks. Its behaviour in solution is also special, developing a blue colour and forming micelles, when adding water to acetone solutions.     

Study of the winter and summer changes of the air composition in the church of Szalowa, Poland, related to conservation

The St. Michael Archangel’s Church in Szalowa, Poland, was selected for closer investigation with respect to the indoor/outdoor air exchange and its influence on the air quality and work arts preservation. Chemical composition, size and abundance of particulate matter and concentration of gases NO₂, SO₂, O₃ inside and outside the church were determined. To study seasonal variation of the weather condition (temperature, inversion level, wind direction) and the influence of seasonal sources of the air pollution (like heating of the nearby houses), samples were collected in winter and summer time. It was stated that suspended particulate matter inside the wooden church has in general an outdoor source. Several groups of particles were distinguished such as the organic ones, soil dust, nitrates and sulphates. In case of organic and soil dust particles, the concentration inside was higher than outside. From the results, in comparison to literature data, one can conclude that accumulation of particulate suspended matter in the church is more intense than in other types of buildings. Gaseous pollutants were detected but their concentration was negligible.     

Synthesis and properties of water-soluble gold colloids covalently derivatized with neutral polymer monolayers

Citrate-capped gold nanoparticles as well as planar gold surfaces can be efficiently grafted with a covalently attached polymer monolayer a few nanometers thick, by simple contact of the metal surface with dilute aqueous solutions of hydrophilic polymers that are end-capped with disulfide moieties, as shown by UV/vis absorption, dynamic light scattering, and surface plasmon resonance studies. The hydrophilic polymer-coated gold colloids can be freeze-dried and stored as powders that can be subsequently dissolved to yield stable aqueous dispersions, even at very large concentrations. They allow for applying filtrations, gel permeation chromatography, or centrifugation. They do not suffer from undesirable nonspecific adsorption of proteins while allowing the diffusion of small species within the hydrogel surface coating. In addition, specific properties of the original hydrophilic polymers are retained such as a lower critical solution temperature. The latter feature could be useful to enhance optical responses of functionalized gold surfaces toward interaction with various substrates.     

Co(II)5(OH)6(SO4)2(H2O)4: the first ferromagnet based on a layered cobalt-hydroxide pillared by inorganic...OSO3-Co(H2O)4-O3SO..

The synthetic mineral Co(II)5(OH)6(SO4)2(H2O)4 (1), obtained by hydrothermal reaction of CoSO4.7H2O and NaOH at 165 degrees C and consisting of brucite-like Co4(OH)6O2 layers pillared by OSO3-Co(H2O)4-O3SO, is a ferromagnet (T(Curie)= 12 K, Hc= 580 Oe).     

Improvement in steroid screening for doping control with special emphasis on stanozolol

The Medical Commission of the International Olympic Committee forbids the use of anabolic androgenic steroids and beta2-agonists to improve athletic performance. In this work we have selected examples of anabolic androgenic compounds and their metabolites to evaluate the GC-MS analysis of some trimethylsilyl derivatives. The aim is to set the best GC conditions to improve the detection within the whole range of analyte elution temperatures. The initial column temperature was changed to 105 or 140 degrees C followed by 40 degrees C min(-1) to 200 degrees C and then 15 degrees C min(-1) to 300 degrees C. Using 140 degrees C as the initial oven temperature it was possible to obtain narrower initial analyte distributions for the compounds that elutes at the beginning of the chromatogram as clenbuterol, mabuterol, epimethylenediol and norandrosterone, without loss of derivatized metabolites signal. Later. eluting analytes, such as the stanozolol metabolites, furazabol and oxandrolone were not affected. Temperatures below 140 degrees C. resulted in partial derivatization for some analytes mainly stanozolol related structures. Therefore evaluation of derivatization conditions as occurring in three steps, the vial, vaporization chamber and capillary column, was thoroughly assessed. The new program temperature improves the signal-to-noise ratio for some compounds and shows adequate resolution for endogenous compounds. Some of the difficult key separations necessary for doping control enforcement were also obtained with the proposed method.     

The correlation of the stability constants of 1,3-dicarbonylic monochelates of Iron(III) with the acid dissociation constants of the ligand

The variation of the logrithms of stability constants of iron(III) monochelated compounds with structurally similar 1,3-dicarbonylic compounds has been found to be an essentially linear function of the negative logarithms of the acid ionization constant of the ligands. An analytical correlation which could be useful to predict equilibrium constants of iron(III) chelates has been developed. From spectrophotometric and potentiometric data a quantitative evaluation of the stability of the complex has been carried out. Results have provided information regarding substituent effects on the equilibrium constants.