Mikronachweis der Salicylsäure als Silbersalicylat

Zusammenfassung Es wird eine Methode beschrieben, nach der die Salicylsäure über ihr Ammonsalz als Silbersalicylat in kleinsten Mengen nachgewiesen werden kann. Es bilden sich dabei monokline Prismen in Form von Rhomboiden, die durch die Kristallwinkel, die schiefe Auslöschung und deren Beziehung zum Kristallumriß als Silbersalicylat identifiziert werden können. Erfassungsgrenze: 0,4 Salicylsäure. Ferner wird das unter Umständen ebenfalls bei der Reaktion auftretende Silbersalz der Benzoesäure und seine Unterscheidung von Silbersalicylat auf optischem Wege besprochen. Die Reaktion gelingt auch mit Mikrosublimaten.

---

Summary A method is described whereby minimal amounts of salicylic acid can be detected as silver salicylate, viâ the ammonium salt. Monoclinic prisms of the form of rhomboids are produced, which may be identified as silver salicylate from the crystal angles, the oblique extinction, and the relationship of these to the crystal outline. The limit of the method is 0,4 salicylic acid. The optical method for distinguishing between silver salicylate and silver benzoate, which is also formed in certain circumstances in the course of the reaction, is discussed. The reaction may be successfully applied to micro-sublimates.

---

Résumé On décrit une méthode, qui permet de déceler des plus petites quantités de l'acide salicylique comme salicylate d'argent en préparant d'abord le salicylate d'ammonium. Des prismes monoclines, en forme rhombique, se forment d'abord, qui peuvent être identifiés comme salicylate d'argent par l'angle du cristal (Kristallwinkel), l'extinction oblique (schiefe Auslöschung) et les relations de ceux aux contoures du cristal (Kristallumriß). Limite d'identification: 0,4 d'acide salicylique. Ensuite on discute aussi la différence entre le salicylate d'argent et le benzoate d'argent, qui se forme parfois au cours de la réaction, d'un mode optique. — La réaction peut être appliquée aussi à des micro-sublimés.

     

Expedient synthesis of cyclopropane alpha-amino acids by the catalytic asymmetric cyclopropanation of alkenes using iodonium ylides derived from methyl nitroacetate

A highly enantioselective (up to 97.5% ee) and diastereoselective (95:5 dr trans/cis) Cu(I)-catalyzed cyclopropanation of alkenes using phenyliodonium ylide generated in situ from iodosobenzene and methyl nitroacetate is reported. The cyclopropanation took place with high enantioselectivity for a wide range of alkenes, and the reaction was performed at room temperature. 1-Nitrocyclopropyl esters are versatile building blocks to access the corresponding cyclopropane amino esters and aminocyclopropanes in two and three steps, respectively, from commercially available products.     

Copper corrosion in buffered and non-buffered synthetic seawater: a comparative study

The electrochemical behaviour of copper in neutral buffered and non-buffered synthetic seawater and in pure chloride solutions has been studied by cyclic voltammetry, weight loss measurements, open circuit potential and scanning electron microscopy (SEM). Values of the repassivation potentials of Cu in non-buffered and buffered synthetic seawater, at 50 mV s^–1, were 0.12 and 0.46 V vs. SCE, respectively. The sharpness, heights and location of the different peaks as well as their charges were shown to be influenced by the composition of the solution, buffering conditions, deoxygenation, polarization potential and time. High chloride concentrations lead to higher oxidation charges. The anodic and the cathodic charges were shown to increase as the chloride concentration increases. The open circuit potential transients of copper in non-deoxygenated, non-buffered synthetic seawater indicate pitting from the beginning of the exposure, while in buffered solutions the pitting appeared only after a quite long exposure period, i.e. after 40 days. Corrosion rates of Cu samples after 3 months of immersion were higher in solutions of pure chloride (0.5 M) than in synthetic seawater. After six months the differences were even more noticeable. SEM images have showed a somewhat higher density of pits on copper samples immersed in the chloride solution (0.5 M), in comparison with those in synthetic seawater.     

Simple and rapid micellar electrokinetic capillary chromatographic method for simultaneous determination of four antiepileptics in human serum

A very rapid and simple MEKC method was developed for the simultaneous determination of four antiepileptic drugs, ethosuximide (Etho), primidone (Pri), phenytoin (Pht) and carbamazepine (Cbz) in human serum. Sample analysis required only 100 microL of human serum which only needed to be centrifuged, decanted and combined with the running buffer [5.3 mM Na(2)HPO(4)/3.2 mM borax buffer (pH 9.5) containing 55 mM SDS and 3.5% (v/v) acetone]. The analysis was performed in only 10 min into fused-silica capillaries (57 cm total length with 50 microm i.d. and 50 cm to the detector) using the MEKC methodology with diode-array detection at 220 nm. The calibration graphs were established for ethoximide, primidone, phenytoin and carbamazepine between 0 and 20 mg/L. Recoveries were between 85 and 87%. The simplicity of the proposed methodology makes it suitable for routine clinical use, especially for epileptic patients on polytherapy.     

Covalent attachment of a nickel nitrilotriacetic acid group to a germanium attenuated total reflectance element

The surface of a germanium internal reflectance element (IRE) was modified to bind 6X-histidine (his)-tagged biomolecules. The step-by-step surface modification was monitored via single-pass attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FT-IR). Initially an adlayer of 7-octenyltrimethoxysilane (7-OTMS) was formed on the Ge crystal through the surface hydroxyl groups, which were produced via ozonolysis of the Ge surface. The vinyl moiety of 7-OTMS was oxidized to a carboxylic acid, which was activated by 1,1'-carbonydiimidazole (CDI) to produce a labile imidazole. The labile imidazole that resulted from the CDI coupling was then displaced by the primary amine of nitrilotriacetic acid (NTA). Nickel sulfate was added to the system, and it coordinated with the three carbonyl groups and the nitrogen on NTA, thus leaving the ability of Ni to coordinate with two adjacent histidine residues. Binding of his-tagged biotin to nickel nitrilotriacetic acid (Ni-NTA) was observed by ATR-FT-IR spectroscopy. The surface modification method presented in this paper had minimal nonspecific binding, the Ni-NTA surface was reusable if stored properly, and complete removal of the organic surface was achievable.     

Synthesis of 3-hexahelicenol and its transformation to 3-hexahelicenylamines,diphenylphosphine, methyl carboxylate,and dimethylthiocarbamate

A nonphotochemical synthetic route to 3-hexahelicenol is reported. It involves a key [2+2+2] cycloisomerization of CH(3)O-substituted triyne that is readily available from 1-methoxy-3-methylbenzene and 1-bromo-2-(bromomethyl)naphthalene. Further functional group transformations led to 3-CO(2)CH(3), 3-NH(2), 3-PPh(2), and 3-SC(O)N(CH(3))(2) substituted hexahelicenes.     

Study of perrhenate reduction by capillary electrophoresis

The influence of perrhenate concentration, the concentration of the reducing agent and pH of the reaction mixture on the yield of perrhenate reduction were studied to find a possibility to decrease the stannous chloride concentration in the reaction mixture without negative changes on the yield of perrhenate reduction. Britton-Robinson buffer solutions were selected as the background electrolytes because of their buffering capacity in a wide pH interval. The highest degree of perrhenate reduction was obtained at pH 2 at perrhenate concentrations ranging from 10(-4) to 10(-3) mol/L. The stability of reduced rhenium against pH change from 2 to 5.5 and against dilution of rhenium in the reaction mixture to the concentration suitable for the application in radiotherapy were studied as well. The results obtained by capillary electrophoresis and by thin-layer chromatography with radiometric detection were compared.     

On the accuracy of correlation energy calculated by the correlation factor method: first- and second-row atoms

Summary The correlation energy of two- and four-isoelectronic series, a representative example for which the existing spin-density functionals fails, is calculated using the Colle and Salvetti method, considering mono- and multideterminantal wave functions. The results are in agreement with experimental data, and show the potentiality of this method when it is applied to wave functions including the most relevant configurational features. Also, results for the ionization energies and electron affinities of first- and second-row atoms are reported.     

Information content of data and variables and types of weighting in least-squares regression methods

Algorithms are given for evaluating the relative amount of useful information related to a particular parameter which is carried by individual data points and intervals of the variables. The algorithms provide an efficient means of using the information contained in a set of data. Applications to the optimization of weighting in regression methods are described. Several informational and combined informational-statistical types of weighting are studied as a means of improving the accuracy and precision of the parameters obtained by non-linear regression.     

Flow-injection determination of creatine in animal tissues

After deproteination of samples with trichloroacetic acid, creatine is determined by reaction with 1-naphthol and biacetyl, based on a stopped-flow method. The calibration graph is linear over the range 0–250 mg l^?1, and recoveries from muscle samples are quantitative.