Chromium- and tungsten-triggered valence isomerism of cis-1-acyl-2-ethynylcyclopropanes via [3,3]sigmatropy of (2-acylcyclopropyl)vinylidene-metal intermediates.

The reaction of cis vicinal acetylethynylcyclopropanes 1 with a catalytic amount of M(CO)5(THF) (M = Cr or W) in the presence of Et3N at room temperature gave ortho-substituted phenols 7 in good yields as valence isomerized products. In the absence of Et3N the reactions did not work at all. The reaction of a cyclopropane having an ester or an amide instead of an acetyl moiety with M(CO)5(THF) did not take place, whereas an ethynylvinylcyclopropane gave a mixture of 1- and 2-substituted 1,3,5-cycloheptatrienes. These valence isomerization reactions are assumed to proceed via the formation of vinylidene-metal intermediates 2 from terminal alkynyl moieties followed by [3,3]sigmatropy of 2 to give seven-membered carbene complexes 3.     

Photoaffinity labeling of bovine rhodopsin

Photoaffinity labeled (3-diazoacetoxy)-9-cis-retinal (1) and (9-methylenediazoacetoxy)-9-cis-retinal (20) were synthesized and bound to absorption maxima at 465 and 460 nm respectively. Binding studies established that synthetic retinals 1 and 2 bind to the natural binding site and that the integrity of the diazoacetoxy photoaffinity label is preserved in the process. Incorporation of 3-(O¹⁴COCHN₂)-labeled 9-cis retinal could be conveniently carried out in high yield using apomembrane solubilized in CHAPS as detergent to afford the pigment analog in a pure form. Photolysis of the diazoacetoxy group within the binding site led to 15–20%, crosslinking of rhodopsin as estimated by using radiocarbon containing labeled retinal 1 thus showing that this synthetic retinal is suitable for photoaffinity labeling of the active site in rhodopsin. Subsequent experiments to establish the site(s) of crosslinking by sequencing studies will then contribute to our knowledge of the structure of rhodopsin.     

Synthesis, characterization and FET properties of novel dithiazolylbenzothiadiazole derivatives

Dithiazolylbenzothiadiazoles easily obtained have high electron affinity and the FET device of a trifluoromethylphenyl derivative exhibited a good n-type performance with high electron mobility.     

Synthesis of new peptidic glycoclusters derived from β-alanine

The synthesis of an asymmetric glycocluster 1 has been achieved by coupling of a sugar unit with the β-alanine polypeptide, the principal chain, and combining a carbohydrate chain with the side chain causing it to branch from the N terminal. The synthesis of this side chain multivalent ligands is based on the scaffolding of some ω-amino acid (glycine, β-alanine, and GABA) derivatives. This method facilitated the synthesis of the cluster, of which the length of each unit differs.     

Sol-Gel Processing of Transparent PLZT((Pb,La)(Zr,Ti)O3) Fibers

PLZT((Pb,La)(Zr,Ti)O₃) ceramic fibers were prepared by the sol-gel method from a solution of lead acetate trihydrate, lanthanum isopropoxide, zirconium n-propoxide and titanium isopropoxide containing 2-methoxyethanol as the solvent. The as-drawn gel fibers were pretreated in an autoclave and preheated in flowing H₂O vapor prior to the heat-treatment for crystallization. The effects of autoclaving and preheating in flowing H₂O vapor on the structure and composition of the resultant fibers were investigated. Optically transparent single phase perovskite PLZT fibers of 5–15 m in thickness and 5 cm in length were successfully prepared when the autoclave-treatment and the preheating in flowing H₂O vapor were conducted prior to crystallization. These treatments are thought to promote hydrolysis of the organic groups and polycondensation reaction in the gel fibers, leading to the successful formation of dense, crack-free transparent PLZT fibers.     

Structure and biosynthetic implication of (S)-NHAB, a novel shunt product, from a disruptant of the actVI-ORFA gene for actinorhodin biosynthesis in Streptomyces coelicolor A3(2)

A novel shunt product was isolated from a disruptant of the actVI-ORFA gene involved in the biosynthesis of actinorhodin (ACT) in Streptomyces coelicolor A3(2). Its structure was elucidated as 1,4-naphthoquinone-8-hydroxy-3-[3(S)-acetoxy-butyric acid], (S)-NHAB, based on NMR, MS, and CD spectroscopic data as well as a single crystal X-ray crystallographic analysis. The formation of (S)-NHAB involves a retro-Claisen type C-C bond cleavage of an ACT biosynthetic intermediate. Feeding experiments with [1-¹³C] and [2-¹³C] acetates indicated its biosynthetic origin as a single octaketide chain. The relevant gene product, Act-ORFA, which is a functionally unknown protein, is proposed to play a regulatory role related to the multi-enzymatic steps to ACT production, based on the metabolic profile of its disruptant and the wide distribution of actVI-ORFA homologues in the gene clusters for Streptomyces aromatic polyketides.     

Catalytic transformation of methane over in-loaded ZSM-5 zeolite in the presence of ethene

Methane is shown to react with ethene over In-loaded ZSM-5 to higher hydrocarbons such as propene and toluene at around 673 K. Such methane conversion is not catalyzed by proton-exchanged ZSM-5 (H-ZSM-5) under the same conditions, only C2H4 being converted to higher hydrocarbons. By using 13C-labeled methane (13CH4) as a reactant, the reaction paths for the formation of propene, benzene and toluene were examined. 13C-labeled propene (13CC2H6) is formed by the reaction of 13CH4 with C2H4. The lack of 13C-labeled benzene revealed that propene is not transformed to benzene, which instead originates entirely from C2H4. The 13C atom is inserted both into the methyl group and benzene ring in the toluene formed. This indicates that toluene is formed by two reaction paths; the reaction of 13CC2H6 with butenes formed by the dimerization of C2H4 and the reaction of benzene with 13CH4. The existence of the latter path was proved by the direct reaction of 13CH4 with benzene. The reaction of methane with benzene was also carried out in a continuous flow system over In-loaded ZSM-5. The reaction afforded 7.6% and 0.9% yields of toluene and xylenes, respectively, at 623 K.     

Synthesis of open-ended MoS2 nanotubes and the application as the catalyst of methanation

We report the synthesis of open-ended MoS2 nanotubes and their application as the catalyst for methanation of carbon monoxide with hydrogen. Because the catalysis of the methanation reaction occurs at relatively low temperatures, such nanotubes may provide new solutions toward harnessing the environmental load caused by CO emission.     

1,4‐Addition polymerization of 1,4‐bis(4‐benzylpyridinium)butadiyne triflate in a dipolar aprotic solvent

1,4‐Bis(4‐benzylpyridinium)butadiyne triflate was aggregated in dimethylformamide and spontaneously converted into the 1,4‐addition type of polydiacetylene. The polymerization took place in a dipolar aprotic solvent with a large dielectric constant that could enhance the aggregation of the ionic diacetylene salt through the electrostatic interaction. The molecular weight of the diacetylene was leveled off after 30 h at 80 °C to reach 1.5 × 10⁴ (number‐average molecular weight) that consisted of the 1,4‐addition type of polydiacetylene similar to polydiacetylenes obtained in the conventional solid‐state polymerization. Electron spin resonance spectra revealed that diradicals were generated at the earlier state aggregation to give rise to a solution polymerization. The UV spectra also suggested the presence of the activated aggregation associated with the polymerization as well as the eximer emission spectra. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3534–3541, 2002     

Effect of cholesterol or phospholipid incorporation on the chemical stability of the muramyldpeptide derivative B30-MDP in mixed vesicles

Application of the muramyldipeptide derivative B30-MDP to liposomal vaccines will aid in the development of improved high immunogenicity vaccines. To give full play to the effectiveness of B30-MDP as a liposomal vaccine, it is important to evaluate the effect of cholesterol, dimyristoylphosphatidylcholine (DMPC) or distearoylphosphatidylcholine (DSPC) incorporation on the chemical stability of B30-MDP and physicochemical properties of B30-MDP/lipid mixed vesicles from the view point of pharmaceutics.The observed degradation rate constants of B30-MDP by hydrolysis in B30-MDP/cholesterol mixed vesicles were increased with increasing concentration of cholesterol, however, those in B30-MDP/DMPC and B30-MDP/DSPC mixed vesicles were unchanged with increasing concentration of DMPC and DSPC. The degradation behavior of B30-MDP was then compared with physicochemical properties of B30-MDP/lipid mixed vesicles, such as membrane fluidity and particle size. It was apparent that the degradation of B30-MDP in B30-MDP/cholesterol mixed vesicles was influenced by the particle size, but not by the fluidity of the membranes. In the case of B30-MDP/phospholipid mixed vesicles, MDP/phospholipid mixed vesicles, the degradation of B30-MDP was not influenced by either the membranes' fluidity or the particle size of the mixed vesicles.It is considered that the degradation of B30-MDP in the mixed vesicles is dependent on the membrane state, and the addition of cholesterol to B30-MDP vesicle inhibits the mutual interaction of MDP regions, whereas the addition of phospholipids hardly influences the mutual interaction of MDP regions, possibly owing to phase separation between B30-MDP and phospholipids.