Anion binding to a ferric porphyrin complexed with per-O-methylated beta-cyclodextrin in aqueous solution

5,10,15,20-Tetrakis(4-sulfonatophenyl)porphinato iron(III) (Fe(III)TPPS) forms a very stable 1:2 complex with heptakis(2,3,6-tri-O-methyl)-beta-cyclodextrin (TMe-beta-CD), whose iron(III) center is located at a hydrophobic cleft formed by two face-to-face TMe-beta-CD molecules. Various inorganic anions (X(-)) such as F(-), Cl(-), Br(-), I(-), N(3)(-), and SCN(-) coordinate to Fe(III)TPPS(TMe-beta-CD)(2) to form five-coordinate high-spin Fe(III)TPPS(X)(TMe-beta-CD)(2), while no coordination occurs with ClO(4)(-), H(2)PO(4)(-), NO(3)(-), and HSO(4)(-). Except for F(-), none of the anions investigated coordinate to Fe(III)TPPS in the absence of TMe-beta-CD due to extensive hydration to the anions as well as to Fe(III)TPPS. The present system shows a high selectivity toward the N(3)(-) anion. The thermodynamics suggests that Lewis basicity, hydrophilicity, and shape of an X(-) anion are the main factors to determine the stability of the Fe(III)TPPS(X)(TMe-beta-CD)(2) complex.     

Determination of saccharides in sake by high-performance liquid chromatography with polarized photometric detection

A high-performance liquid chromatographic method has been developed for the determination of saccharides in sake, an alcoholic beverage brewed from rice. Saccharides in sake were separated on a normal phase (carbamoyl bonded silica) column using a linear gradient elution of water in acetonitrile. Seven saccharides, glucose, maltose, isomaltose, maltotriose, panose, isomaltotriose and ethyl alpha-D-glucoside, were determined by a polarized photometric detector. Unidentified peaks suggesting saccharides with polymerization degrees over 4 were also observed. The proposed method did not require any sample clean-up treatment. As an application, saccharide compositions in various kinds of sake were compared.     

Asymmetric Hydroformylation of Vinylfurans Catalyzed by {(11bS)‐4‐{[(1R)‐2′‐Phosphino[1,1′‐binaphthalen]‐2‐yl]oxy}dinaphtho[2,1‐d:1′,2′‐f]‐ [1,3,2]dioxaphosphepin}rhodium(I) [RhI{(R,S)‐binaphos}] Derivatives

The asymmetric hydroformylation of 2‐ and 3‐vinylfurans ( 2a and 2b , resp.) was investigated by using [Rh{(R,S)‐binaphos}] complexes as catalysts ((R,S)‐binaphos = (11bS)‐4‐{[1R)‐2′‐phosphino[1,1′‐binaphthalen]‐2‐yl]oxy}dinaphtho[2,1‐d:1′,2′‐f][1,3,2]dioxaphosphepin; 1 ). Hydroformylation of 2 gave isoaldehydes 3 in high regio‐ and enantioselectivities (Scheme 2 and Table). Reduction of the aldehydes 3 with NaBH₄ successfully afforded the corresponding alcohols 5 without loss of enantiomeric purity (Scheme 3).     

Effect of Coriolis force on counter-current chromatographic separation by centrifugal partition chromatography

The effect of Coriolis force on the counter-current chromatographic separation was studied using centrifugal partition chromatography (CPC) with four different two-phase solvent systems including n-hexane-acetonitrile (ACN); tert-butyl methyl ether (MtBE)-aqueous 0.1% trifluoroacetic acid (TFA) (1:1); MtBE-ACN-aqueous 0.1% TFA (2:2:3); and 12.5% (w/w) polyethylene glycol (PEG) 1000-12.5% (w/w) dibasic potassium phosphate. Each separation was performed by eluting either the upper phase in the ascending mode or the lower phase in the descending mode, each in clockwise (CW) and counterclockwise column rotation. Better partition efficiencies were attained by the CW rotation in both mobile phases in all the two-phase solvent systems examined. The mathematical analysis also revealed the Coriolis force works favorably under the CW column rotation for both mobile phases. The overall results demonstrated that the Coriolis force produces substantial effects on CPC separation in both organic-aqueous and aqueous-aqueous two-phase systems.     

Robust and simple interface for microchip electrophoresis-mass spectrometry

A robust and simple interface for microchip electrophoresis-mass spectrometry (MCE-MS) was developed using a spray nozzle connected to the exit of the separation channel of the microchip. The spray nozzle was attached to the microchip using a polyether ether ketone screw without adhesive, thus allowing easy replaced. Sample injection and electrophoretic separation was performed by control of the voltage only. The analysis of a few basic drugs was performed using the optimized MCE-MS system. The separation was improved by using a high-viscosity separation buffer and a spray nozzle with a small bore size. This system was also applied to the separation of peptides and protein-trypsin digests. Sample adsorption was minimized by adding acetonitrile to the separation buffer when using a quartz microchip.     

A highly cis-selective synthesis of 2-ethynylaziridines by intramolecular amination of chiral bromoallenes: improvement of stereoselectivity based on the computational investigation

The base-mediated intramolecular amination of bromoallenes having an axial chirality is described. The treatment of (4S,aR)-4-alkyl-4-[N-(arylsulfonyl)amino]-1-bromobuta-1,2-dienes with NaH in DMF affords 2,3-cis-2-ethynylaziridines in good to excellent selectivity (2,3-cis:trans = 92:8-99:1). The reaction of (4S,aS)-bromoallenes with NaH/DMF also gives 2,3-cis-2-ethynylaziridines selectively (79:21-91:9). These experimental results have been rationalized by B3LYP density functional calculations together with the 6-31+G(d) basis set and the Onsager solvation model. The transition structures for cis-aziridine formation of both (4S,aR)- and (4S,aS)-bromoallenes in DMF are favored over the corresponding trans transition structures by 4.35 and 1.41 kcal/mol, respectively. Furthermore, the calculations predicted that a less polar solvent gives higher cis selectivity for (4S,aS)-bromoallenes. In fact, improvement of the cis selectivity to 99:1 has been realized by using a less polar solvent such as THF. The cyclization of bromoallenes bearing a beta- or gamma-amino group also affords four- and five-membered azacycles in a highly cis-selective manner.     

Mononuclear five-coordinate molybdenum(IV) and -(V) monosulfide complexes coordinated with dithiolene ligands: reversible redox of Mo(V)/Mo(IV) and irreversible dimerization of [MoVS]- cores to a dinuclear [MoV2(mu-S)2]2- Core

A mononuclear five-coordinate molybdenum(IV) monosulfide complex, (Et4N)2[MoS(L)2] (L = cyclohexene-1,2-dithiolate) (1), was obtained and characterized by IR, UV-vis spectroscopic methods, and X-ray crystallography. 1 was oxidized by an equivalent ferrocenium cation to give the corresponding mononuclear molybdenum(V) complex, (Et4N)[MoS(L)2] (2), which was stable for a few minutes under a lower concentration than 0.3 mM and then further dimerized to (Et4N)2[Mo(L)2]2(mu-S)2 (3).     

Characterization of p-aminobenzamidine-based sorbent and its use for high-performance affinity chromatography of trypsin-like proteases

An affinity sorbent, hydrophilic polymer-based carrier of different pore size (Toyopearl) with immobilized p-aminobenzamidine (ABA), has been prepared. Its basic properties and some applications for protein purification were studied. ABA, which is a synthetic inhibitor for trypsin-like proteases, was covalently immobilized to Toyopearl by reductive amination. The ligand density and binding capacity for porcine trypsin varied depending on the pore size of Toyopearl. The maximum binding capacity of the immobilized p-aminobenzamidine Toyopearl (ABA-Toyopearl) for trypsin was more than 40 mg/ml gel. ABA-Toyopearl thus obtained was very stable below pH 8 and was successfully used for high-performance affinity chromatography of trypsin-like proteases such as trypsin, thrombin, tissue-type plasminogen activator or urokinase in a single step at 25 degrees C.     

A distance-controlled oligopeptide linker as a novel photo-induced energy transfer switch by secondary structural transition

By using an oligopeptide chain as a functional linker and introducing coumarin 2 and coumarin 343 at the chain ends, an effective photo-induced energy transfer system was constructed and energy transfer from coumarin 2 to coumarin 343 was switched on and off by a solvent-induced helix-coil secondary transition of the oligopeptide chain.     

Synthesis, Characterization, and Crystal Structure of a (&mgr;-Oxo)bis(&mgr;-acetato)diiron(III) Complex with a Dinucleating Hexapyridine Ligand, 1,2-Bis[2-(bis(2-pyridyl)methyl)-6-pyridyl]ethane. The First Example of a Discrete (&mgr;-Oxo)bis(&mgr;-acetato)diiron(III) Complex with a Dinucleating Ligand

A mononucleating tripyridine ligand, 2-(bis(2-pyridyl)methyl)-6-methylpyridine (L(1)), and a dinucleating hexapyridine ligand, 1,2-bis[2-(bis(2-pyridyl)methyl)-6-pyridyl]ethane (L(2)), have been prepared. The reaction of a carbanion of 2,6-lutidine with 2-bromopyridine affords L(1) which is converted to L(2) quantitatively by treating with tert-butyllithium and 1,2-dibromoethane. (&mgr;-Oxo)bis(&mgr;-acetato)diiron(III) complexes [Fe(2)(O)(OAc)(2)(L(1))(2)](ClO(4))(2) (1) and [Fe(2)(O)(OAc)(2)L(2)](ClO(4))(2) (2) have been synthesized and characterized by means of infrared, UV/vis, mass, and M?ssbauer spectroscopies and by measuring magnetic susceptibility and cyclic voltammograms. All the spectral data are consistent with the (&mgr;-oxo)bis(&mgr;-acetato)diiron(III) core structure in both 1 and 2. A relatively strong molecular ion peak at m/z 865 corresponding to [{Fe(2)O(OAc)(2)L(2)}(ClO(4))](+) in a FAB mass spectrum of 2 suggests the stabilization of the (&mgr;-oxo)bis(&mgr;-acetato)diiron(III) core structure by L(2) in a solution state. The compound 2.DMF.2-PrOH.H(2)O, chemical formula C(44)Cl(2)Fe(2)H(51)N(7)O(16), crystallizes in the monoclinic space group C2/c with a = 22.034(6) ?, b = 12.595(5) ?, c = 20.651(7) ?, beta = 121.49(2) degrees, and Z = 4. The cation has 2-fold symmetry with the bridging oxygen atom on the 2-fold axis: Fe-(&mgr;-O) = 1.782(5) ?, Fe-O-Fe = 123.6(6) degrees, and Fe.Fe = 3.142(3) ?. The diiron(III) core structure of 2 seems to be stabilized by encapsulation of the ligand. Compound 2 is the first example of a discrete (&mgr;-oxo)bis(&mgr;-acetato)diiron(III) complex with a dinucleating ligand.