Gas chromatographic detection of organometallic compounds by reactive-flow photometry

The response of the reactive flow detector (RFD) toward organometallic compounds of several transition metals has been explored, and several of its strong elemental responses have been characterized in detail. The RFDs minimum detectable flow (measured in picograms of metal per second at S/N_p-t-p=2) is 0.1 for ruthenium, 3 for chromium, 10 for manganese, 5 for nickel, 15 for iron, and 2 for osmium. Typically, the linearity of response spans four orders of magnitude, with atomic selectivity of metal versus carbon ranging from 2 to 3 orders. Response quenching by co-eluting hydrocarbons is not observed. As a demonstration experiment, the common analysis of methylcyclopentadienyl manganese tricarbonyl (MMT) in gasoline is carried out on an RFD system modified for dual-channel operation. The results show that dual-channel operation of the RFD can increase the native elemental selectivity of manganese over carbon by a factor of 100, in accordance with earlier results obtained on a special version of the flame photometric detector (FPD). Significant differences exist between the optical spectra of carbon flame species resulting from various combustion modes carried out in the RFD capillary, and also between conventional FPD and typical RFD spectra. Consideration of these spectral differences suggests that the virtual absence of in the reactive flow may be the primary reason why analyte response quenching by hydrocarbons, while prominent in the FPD, is not observed in the RFD.     

Fingerprinting bacterial strains using ion mobility spectrometry

Ion mobility spectrometry (IMS) is currently in widespread use for the detection and identification of narcotic and explosive compounds without prior sample clean-up or concentration steps. IMS analysis is rapid, less than a minute, and sensitive, with detection limits in the nanogram to picogram range, depending on the target analyte. Our studies indicate that this technique has potential for detection of specific components of bacterial cells and for identification and differentiation of bacterial strains and species within a minute, and with no specialized test kits or reagents required. When microgram quantities of whole bacterial cells are thermally desorbed, complex positive or negative ion patterns (plasmagrams) are obtained. These plasmagrams differ reproducibly for different strains and species and for different conditions of growth, and can be used for the classification and differentiation of specific strains and species of bacteria, including pathogens. Methods for improved ion peak detection, most notably sequential sample desorption at stepped increases in temperature (programmed temperature ramping), are described.     

Effect of buffer concentration on gradient chromatofocusing performance separating protiens on a high-performance DEAE column

Gradient chromatofocusing is a recently developed chromatographic technique that overcomes the limitations of conventional chromatofocusing. This technique employs a HPLC gradient system and simple low-molecular-mass buffer components to generate linear or other function pH gradients on ion-exchange columns. Results of the present work show a superior separation of beta-lactoglobulin A and B in gradient chromatofocusing compared to salt gradient chromatography using the same DEAE column, with an optimized resolution of 2.3 obtained with gradient chromatofocusing compared to 1.1 obtained with NaCl gradients at constant pH. A significant advantage of the gradient chromatofocusing technique over the conventional chromatofocusing technique is its ability to employ a relatively wide range of buffer concentrations in the mobile phase, the effect of which is studied in the present work. Five proteins (conalbumin, ovalbumin, bovine serum albumin, beta-lactoglobulin A and B) are chromatographed on a DEAE-polymethacrylate HPLC anion-exchange column using the same approximately linear pH gradient profile but different mobile phase buffer concentrations. Results show a significant effect of buffer concentration on peak width, separation factor and resolution. For example, resolution increases from 1.5 to 2.3 in the separation of beta-lactoglobulin A and B when the concentration of each of the components in the 100% elution buffer is increased from 6.25 to 25.0 mM (with the same outlet pH gradient). This separation trend is also seen in the chromatography of ovalbumin from a commercial source, noting a progressive increase in resolution of two peaks in the sample (resolution increased from 0.7 to 2.4) when the concentration of each of the components in the 100% elution buffer is increased from 6.25 to 37.5 mM (same outlet pH gradient). The gains in the resolution are attributed to an increase in the separation factor, since the peak widths are generally noted to also increase with increased buffer concentration. These results point to a significant interplay between buffer concentration and pH, which is not effectively exploited in either conventional chromatofocusing or in conventional ion-exchange chromatographic procedures employing salt gradient elution at constant pH. Gradient chromatofocusing has the ability of optimizing both parameters, thus providing it with unique capabilities in protein separations.     

Gel-state NMR investigation of crosslinked poly(methy1 methacrylate) incorporating 13C labeled ethylene glycol dimethacrylate

¹³C labeled ethylene glycol dimethacrylate (EGDMA) was used to form labeled crosslinked PMMA and model ¹³C labeled pendant double bond copolymers. Solution NMR was possible on solvent-swollen samples containing less than 0.5% by weight EGDMA. Spectra confirm significant amounts of singly reacted EGDMA in fully polymerized networks. Peaks arising from the two most likely stereochemical triads (syndi- and heterotactic) were identified but no evidence of cyclic species was observed. Labeled EGDMA allowed observation of the crosslink site at concentrations as low as 0.02 wt-% EGDMA.     

A high performance low magnetic field internal electrospray ionization-fourier transform ion cyclotron resonance mass spectrometer

A new in-magnetic field electrospray ionization (ESI) and Fourier transform ion cyclotron resonance mass spectrometer has been constructed and evaluated. This system is characterized by the use of multiple concentric cryopanels to achieve ultrahigh vacuum in the ion cyclotron resonance cell region, a probe-mounted internal ESI source, and a novel in-field shutter. Initial experiments demonstrate high resolution mass measurement capability at a field strength of 1 T. Mass resolution of 700,000 has been obtained for the 3+ charge state of Met-Lys-bradykinin (at m/z 440) generated by electrospray ionization. When electron impact ionization was employed, resolution in excess of 9,200,000 was achieved for nitrogen molecular ions (N ₂ ⁺ ). Isotopic resolution for molecular ions of bovine ubiquitin (MW=8565 µ) also was achieved by using small ion populations.     

Global existence for degenerate parabolic equations with a non-local forcing

We establish local existence and comparison for a model problem which incorporates the effects of non-linear diffusion, convection and reaction. The reaction term to be considered contains a non-local dependence, and we show that local solutions can be obtained via monotone limits of solutions to appropriately regularized problems. Utilizing this construction, it is further shown that, under conditions of either ‘weak reaction’ or ‘sufficiently small’ initial mass, solutions exist for all time. Finally, we provide an alternative analysis of global existence and investigate blow up in finite time for the case of power law diffusion and convection. These results show the extent to which the assumption of weak reaction may be relaxed and still obtain global existence. © 1997 by B. G. Teubner Stuttgart–John Wiley & Sons Ltd.     

Improved processes of molybdenum-99 production

Two improved processes of⁹⁹Mo production have been developed on laboratory scale. The first one allows to purify Mo of natural isotopic composition from tungsten impurities from 64 to <10 ppm by using preferential adsorption of tungsten on hydrated tin(IV) oxide (SnO₂ nH₂O) before irradiation in a nuclear reactor. The second process deals with the separation of pure fission product⁹⁹Mo from²³⁵U irradiated in a reactor. Two versions of separation process for production of fission⁹⁹Mo have been developed. Both versions start with the dissolution of²³⁵U oxide target in nitric acid and are based on sequential use of alumina and anion exchange resin AG® 1-X8 columns. The yield of⁹⁹Mo in both versions is 80–89%.     

Improved isotopic abundance measurements for high resolution fourier transform ion cyclotron resonance mass spectra via time-domain data extraction

The simultaneous high resolution and accurate mass measurements possible with Fourier transform ion cyclotron resonance mass spectrometry coupled with the gentle ionization of electrospray hold attractions for protein, peptide, and oligonucleotide characterization, including multistage-mass spectrometry measurements for assignment of fragment masses and greater confidence in structural measurements. The detection of cyclotron motion over extended periods of time (in some cases for several minutes) allows higher resolution and mass accuracy. Generally, signal duration has been considered to be limited primarily by background pressure, with ion-neutral collisions leading to the reduction and dephasing of cyclotron motion, causing signal loss. However, recent theoretical work has shown that the ion cloud stability that is a prerequisite for high performance measurements is highly dependent on the electric field generated by the ion cloud, thus giving rise to a minimum number of charges or ions required for extended time-domain signals. The effects of ion population on ion cloud stability and signal duration, and the subsequent effects on resolution and measured isotopic abundances are reported. Individual time-domain signals for bovine insulin isotopic peaks were extracted to allow a comparison of the damping rates for each of these ion clouds and the measured time-domain amplitude maxima are shown to provide a better match with the theoretically predicted isotopic abundances for insulin. These results show that different damping rates of ions of very similar mass, but different ion cloud population sizes, can have dramatic effects on the observed isotopic patterns. Additionally, more accurate, high resolution spectra can be produced by correcting for the effects of the different damping rates that are observed for different ion population sizes.     

Ethyl and isopropyl 4‐ferrocenylbenzoate

The title compounds, [Fe(C₅H₅)(C₁₄H₁₃O₂)] and [Fe(C₅H₅)(C₁₅H₁₅O₂)], respectively, contain the ferrocenyl η⁵(C₅H₄) and phenyl­ene –C₆H₄– rings in a nearly coplanar arrangement, with interplanar angles of 6.88 (12) and 10.5 (2)°, respectively. Molecules of the ethyl ester form dimers through η⁵(C₅H₅)C—H⋯O=C hydrogen bonds, with graph set R(20), and, together with Csp³—H⋯π(C₅H₅) interactions, generate a one‐dimensional column (irregular ladder). Molecules of the iso­propyl ester aggregate through η⁵(C₅H₅)C—H⋯π(C₆H₄) interactions.