Graphite-silicone rubber composite electrode: Preparation and possibilities of analytical application

Composite electrodes were prepared using graphite powder and silicone rubber in different compositions. The use of such hydrophopic materials interned to diminish the swallowing observed in other cases when the electrodes are used in aqueous solutions for a long time. The composite was characterized for the response reproducibility, ohmic resistance, thermal behavior and active area. The voltammetric response in relation to analytes with known voltammetric behavior was also evaluated, always in comparison with the glassy carbon. The 70% (graphite, w/w) composite electrode was used in the quantitative determination of hydroquinone (HQ) in a DPV procedure in which a detection limit of 5.1x10(-8)molL(-1) was observed. HQ was determined in a photographic developer sample with errors lower then 1% in relation to the label value.     

Selectivity of the cyclic carbonate formation by fixation of carbon dioxide into epoxides catalyzed by Lewis bases

Cyclic carbonate and polycarbonate have been selectively obtained with good conversion by coupling carbon dioxide with diglycidylether of bisphenol A. The ruthenium trichloride supported on tetraethylammonium bromide and polyphosphotungstic acid has been found active and selective to produce the corresponding monomeric and polymeric carbonates. These catalysts can be recycled keeping their high product conversion and selectivity. The heteropolyacid itself showed high activity also under supercritical CO₂ conditions to yield polycarbonate.     

Determination of iodide and thiocyanate in powdered milk and infant formula by on-line enrichment ion chromatography with photodiode array detection

Automated ultra-performance liquid chromatography (LC) with a radiometric detection system has been developed to analyze compounds labeled with short-lived positron (beta(+))-emitting radionuclides in microdialysates. This system involves (1) on-line microdialysis sampling to submit dialysates directly into the LC, (2) ultra-performance LC for improving sensitivity, resolution and speed of analysis, and (3) tandem flow-through of beta(+) and electrochemical detectors for real-time monitoring of radioactive and endogenous compounds simultaneously. This system permitted ultrasensitive measurement of radioactive compounds at the lowest detection limit of about 1Bq with a high-temporal resolution of sampling and less operator attention. The developed system was used for the continuous monitoring of l-[beta-(11)C]-3,4-dihydroxyphenylalanine (l-[beta-(11)C]DOPA) metabolites in the rat brain.     

1-Ethoxyethylidene, a new group for the stepwise SPPS of aminooxyacetic acid containing peptides

For more than a decade, the oxime ether ligation has proven to be one of the most efficient technique for the preparation of various peptide conjugates. However, despite numerous reports, the preparation of aminooxy-containing peptides is still hampered by N-overacylation of the NH-O function either during its incorporation or through the peptide-chain elongation. This restricts the introduction of protected-NH-O function at the last acylation step and prevents the use of standard solid-phase peptide synthesis (SPPS) procedures for the preparation of more complex aminooxy-peptides. We have studied the coupling of modified Fmoc-lysine containing either N-Boc- or N,N'-bis-Boc-protected aminooxyacetic acids (Aoa) during the elongation of the peptide chain and found that none of them is adequate. To circumvent this limitation, we propose to protect the Aoa moiety with a 1-ethoxyethylidene group (Eei) to provide 2-(1-ethoxyethylideneaminooxy)acetic acid building block. We showed that the Eei group is fully compatible with standard SPPS conditions and safely allows the multiple incorporation of the aminooxy functionality into the growing peptide. Since Eei-protected Aoa remains as flexible as normal amino acids in peptide synthesis, it may become the rule for the straightforward preparation of aminooxy peptides.     

Efficient synthesis of [2'-18O]uridine and its incorporation into oligonucleotides: a new tool for mechanistic study of nucleotidyl transfer reactions by isotope effect analysis

Lack of sufficient quantities of isotopically labeled materials has precluded the use of heavy atom isotope effects to investigate mechanisms of nucleotidyl transfer reactions in nucleic acids. Here we achieve regioselective opening of 2,2'-cyclouridine with [(18)O2]benzoic acid/potassium hydride, allowing an efficient "one-pot" synthesis of [2'-18O]uridine in 88% yield. Conversion to the corresponding phosphoramidite enables solid-phase synthesis of [2'-(18)O] RNA substrates for isotope effect studies with nucleotidyl transferases and hydrolases.     

Simultaneous Determination of Glucose and L‐Glutamate Using a Capillary Enzyme Reactor with Electrochemical Detection

An electrophoresis capillary that incorporates two enzymes for the simultaneous determination of glucose and L ‐glutamate is described. The enzymes deposited along the separation capillary walls react with their respective substrate as they are separated during the electrophoresis to produce hydrogen peroxide that is detected by amperometry as the hydrogen peroxide zone emerges from the end of the capillary. Even though both enzyme reactions produce a common product, hydrogen peroxide, the hydrogen peroxide produced by each enzyme reaction stays in narrow zones that migrate the length of the capillary at different rates. The rate of migration for the individual H₂O₂ zones is consistent with the expected mobility of neutral glucose and of anionic L ‐glutamate, respectively. This property allows each enzyme substrate to be characterized in a single experiment and in the presence of other electroactive substances.     

Electrospray ionization-ion trap mass spectrometry study of PQAAPro and PQProAA mimetic derivatives of the antimalarial primaquine

Electrospray ionization-ion trap mass spectrometry (ESI-MS) of imidazolidin-4-one peptidomimetic derivatives of the antimalarial drug primaquine (PQ) is reported. These compounds contain the imidazolidin-4-one moiety either at the N- or the C-terminal of a dipeptide backbone, thus respectively mimicking PQ-Amino Acid-Proline (PQAAPro) and PQProAA derivatives of PQ. Both the peptidomimetics and precursors previously developed by us are promising drug candidates, as they were found to be active against rodent Plasmodium berghei malaria and Pneumocystis carinii pneumonia. Collision-induced dissociation (CID) and tandem-mass spectra (MS) of the title compounds, and fragmentation pathways thereof, led to the following findings: (1) CID patterns present some parallelism with the reactivity towards hydrolysis previously found for the same or related compounds; (2) a positional shift of the imidazolidin-4-one ring is reflected on both degree and pathways of fragmentation, which makes tandem-MS a key tool for differentiation of imidazolidin-4-one isomers; (3) the major MS/MS fragmentation of PQProAA mimetics involves release of a neutral diketopiperazine (DKP), in parallel to the “diketopiperazine pathway” described in tandem-MS studies of oligopeptides; (4) the relative abundance of a major fragment in tandem-MS spectra is inversely correlated with the size of the N-terminal AA in PQProAA mimetics. Overall, this work embodies an original and valuable contribution towards a deeper insight into the molecular properties of novel antimalarials, which can be viewed as representative of both the 8-aminoquinoline and, especially, the imidazolidin-4-one structural classes.     

Structure-guided development of efficacious antifungal agents targeting Candida glabrata dihydrofolate reductase

Candida glabrata is a lethal fungal pathogen resistant to many antifungal agents and has emerged as a critical target for drug discovery. Over the past several years, we have been developing a class of propargyl-linked antifolates as antimicrobials and hypothesized that these compounds could be effective inhibitors of dihydrofolate reductase (DHFR) from C. glabrata. We initially screened a small collection of these inhibitors and found modest levels of potency. Subsequently, we determined the crystal structure of C. glabrata DHFR bound to a representative inhibitor with data to 1.6 A resolution. Using this structure, we designed and synthesized second-generation inhibitors. These inhibitors bind the C. glabrata DHFR enzyme with subnanomolar potency, display greater than 2000-fold levels of selectivity over the human enzyme, and inhibit the growth of C. glabrata at levels observed with clinically employed therapeutics.     

Structure of Isolated 1,4-Butanediol: Combination of MP2 Calculations, NBO Analysis, and Matrix-Isolation Infrared Spectroscopy

Theoretical calculations at the MP2 level, NBO and AIM analysis, and matrix-isolation infrared spectroscopy have been used to investigate the structure of the isolated molecule of 1,4-butanediol (1,4-BDO). Sixty-five structures were found to be minima on the potential energy surface, and the three most stable forms are characterized by a folded backbone conformation leading to the formation of an intramolecular H-bond. To better characterize the intramolecular interactions and particularly the hydrogen bonds, natural bond orbital analysis (NBO) was performed for the four most stable conformers, and was further complemented with an atoms-in-molecules (AIM) topological analysis. Infrared spectra of 1,4-BDO isolated in low-temperature argon and xenon matrixes show a good agreement with a population-weighted mean theoretical spectrum, and the spectral features of the conformers expected to be trapped in the matrixes were observed experimentally. Annealing the xenon matrix from 20 to 60 K resulted in significant spectral changes, which were interpreted based on the barriers to intramolecular rotation. An estimation of the intramolecular hydrogen bond energy was carried out following three different methodologies.     

Elaboration,characterization and study of a new hybrid chitosan/ceramic membrane for affinity membrane chromatography

A new kind of metal affinity membrane based on a ceramic support was prepared. It was elaborated in four steps: (i) deposition of a chitosan layer in order to functionalize the ceramic support, (ii) cross-linking with epichlorohydrin to stabilise the polymer layer and to enable the grafting, (iii) iminodiacetic acid grafting, (iv) Cu²⁺ adsorption. Due to the ceramic support, this membrane is highly resistant and the chitosan layer brings its biocompatibility properties. Each step of the membrane elaboration was studied and the membrane structure was characterized. Both thin coating of the polymer on the alumina grains of the support and the chemical modification of the membrane were proved. Then, bovine serum albumin (BSA) was used as a model protein to test protein retention of the affinity membrane. The protein/membrane interactions were investigated showing that some non-specific ones are involved. Finally, the effect of buffer concentration was checked and it appears that, in the studied range, an increase of the buffer concentration entailed a limitation of the non-specific interactions inducing a better BSA recovering and a higher selectivity.