HPLC Method for Determination of Rosiglitazone in Plasma

A fast and sensitive high performance liquid chromatography method for quantitative determination of rosiglitazone in human plasma has been developed. The extraction from plasma was performed using solid-phase extraction (SPE) on C4 silica (100 mg) disposable extraction cartridges (DEC). The separation of rosiglitazone and two metabolites was achieved on a Phenomenex® Synergi 4 µm MAX-RP (150 × 4.6 mm) column, protected by a guard column. The mobile phase was 0.01 M ammonium acetate, pH 7.0 - acetonitrile (65:35, v/v). (3S)-3-OH-quinidine was used as internal standard. The analytes were detected using fluorescence detection. The method was validated. The limit of quantitation was 1 ng mL⁻¹ and the detection limit was 0.25 ng mL⁻¹ for rosiglitazone in human plasma. The recovery was 90% for rosiglitazone. Linearity was observed over a range of 1-1000 ng mL⁻¹ (r²=0.9959). The intra- and inter-day precision (C.V.) did not exceed 8.7 %. Applicability of the method was demonstrated by a clinical pharmacokinetic study. A healthy volunteer received in two separate phases 4 mg and 8 mg rosiglitazone maleate as a single oral dose. Plasma concentrations were measured for 24 h in both phases.     

Selective Inversion of the Proximal or Distal Hydroxyl Groups in syn,syn-3-[N-(Alkoxycarbonyl)amino] 1,2-Diols via Cyclic Sulfates

The formation of cyclic sulfates (4) from syn,syn-3-[N-(benzyloxycarbonyl)amino] 1,2-diols provides a common intermediate to access other diastereomers via two inversion procedures. Thermolysis of the cyclic sulfates in acetonitrile normally leads to inversion of the distal hydroxyl group to form a 1,3-oxazin-2-one (6). Catalytic hydrogenation of the cyclic sulfates under basic conditions (NEt(3)) results in inversion at the proximal hydroxyl group to form a 1,3-oxazolidin-2-one (5).     

Synthesis of α-2′-deoxynucleosides

α-Thymidine (4) was synthesized from thymidine (1) in 3 steps in 36% overall yield without using chro-matography and with the possibility of increasing the yield to 85% by reusing the remaining α,β-mixture. 1-(2-Deoxy-3,5-di-O-p-toluoyl-α-D-erythro-pentofuranosyl)thymine (3) was further converted to 1-(2-deoxy-α-D-erythro-pentofuranosyl)-5-methylcytosine (5) .     

Synthesis and characterization of molybdenum oxo complexes of two tripodal ligands: reactivity studies of a functional model for molybdenum oxotransferases

Reaction of the tetradentate ligand N-(2-hydroxybenzyl)-N,N-bis(2-pyridylmethyl)amine (L-OH) with MoO2Cl2 in methanol in the presence of NaOMe and PF6- results in the formation of [MoO2(L-O)]PF6. Similarly, the reaction of N-(2-mercaptobenzyl)-N,N-bis(2-pyridylmethyl)amine (L-SH) with MoO2(acac)2 leads to the formation of [MoO2(L-S)]+. The dioxo-molybdenum complex [MoO2(L-O)]+ reacts with phosphines in methanol to afford phosphine oxides and an air-sensitive molybdenum complex, tentatively identified as [Mo(IV)O(L-O)(OCH3)]. The latter complex is capable of reducing biological oxygen donors such as DMSO or nitrate, thereby mimicking the activity of DMSO reductase and nitrate reductase. Reaction of [MoO2(L-O)]PF6 with PPh3 in other solvents than methanol leads to the formation of the Mo(V) dimer [(L-O)OMo(micro-O)MoO(L-O)](PF6)2. The crystal structures of [MoO2(L-O)]PF6 and the micro-oxo bridged dimer are presented.     

Field ionization mass spectrometry as a facile method for the study of the thermal formation of radicals

Electron impact spectra of thermolysis products of organic salts heated in the ion source of a mass spectrometer may give rise to organic ions corresponding to the cation of the salt. Field ionization mass spectrometry has been used as a facile method for detemining whether such an ion is due to ionization of the corresponding radical present in the gas phase, or to an electron impact induced fragmentation of a reaction product of higher mass. By comparison of the electron impact and field ionization spectra of a series of N-methyl pyridinium, tropylium and 1,2-dithiolylium salts it has been found possible to identify the radicals formed thermolytically, when present.     

A method for the systematic resolution of unbranched α-acetoxyalkyl- and aralkylaldehydes: synthesis of 11R and 11S-hete

It is shown that oxazolidines derived from racemic unbranched α-acetoxyaldehydes and ?-ephedrine have predictable chromatographic mobilities, with the R-isomer always having a higher R_f-value. This resolution has been used to prepare $\text{11R}$ and $\text{11S}$-HETE.     

Studies on organophosphorus compounds—III: Reaction of α-substituted secondary car☐amides with HMPA—amidine and/or nitrile syntheses

Secondary car☐amides (R¹CONHR²) undergo different reactions when heated in HMPA at about 220°. If R¹ or R² can form stable carbonium ions, fragmentation reactions are observed and the corresponding nitriles R²CN or R¹CN, respectively, are formed. Also amidines are produced. N-benzyl-acetamide rearranges when heated in HMPA to give β-phenyl-propionitrile, It is suggested that in all the reactions investigated the first step is the formation of a phosphorodiamidate followed by formation of a nitrilium carbonium ion. The fragmentation reactions can be used as an alternative to the Sandmeyer reaction (nitrile synthesis).     

Small-angle neutron scattering study of structural changes in temperature sensitive microgel colloids

The structure of temperature-sensitive poly(N-isopropylacrylamide) microgels in dilute suspension was investigated by means of small-angle neutron scattering. A direct modeling expression for the scattering intensity distribution was derived which describes very well the experimental data at all temperatures over an extensive q range. The overall particle form as well as the internal structure of the microgel network is described by the model. The influence of temperature, cross-linking density, and particle size on the structure was revealed by radial density profiles and clearly showed that the segment density in the swollen state is not homogeneous, but gradually decays at the surface. The density profile reveals a box profile only when the particles are collapsed at elevated temperatures. An increase of the cross-linking density resulted in both an increase of the polymer volume fraction in the inner region of the particle and a reduction of the smearing of the surface. The polymer volume fraction inside the colloid decreased with increasing particle size. The structural changes are in good agreement with the kinetics of the emulsion copolymerization used to prepare the microgel colloids.     

Speciation of four selenium compounds using high performance liquid chromatography with on-line detection by inductively coupled plasma mass spectrometry or flame atomic absorption spectrometry

An analytical method for the speciation of selenomethionine, selenocystine, selenite and selenate by high performance liquid chromatography (HPLC) with atomic spectrometric detection is presented. An organic polymeric strong anion exchange column was used as the stationary phase in combination with an aqueous solution of 6 mmol L^–1 of salicylate ion at pH 8.5 as the mobile phase which allowed the isocratic separation of the four selenium analytes within 8 minutes. The separated selenium species were detected on-line by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma mass spectrometry (ICP-MS). The signal-to-noise ratio of the FAAS detector was optimized using a hydrogen-argon entrained-air flame and a slotted-tube atom trap (STAT) in the flame. The limit of detection (3 σ) achieved by the HPLC-FAAS system was 1 mg L^–1 of selenium (100 μL injections) for each of the four selenium species. More powerful selenium detection was achieved using an ELAN 5000 ICP-MS instrument. Selenium was measured at m/z = 82. The ICP-MS signal intensity was enhanced by a factor of 3–4 after addition of 3% methanol to the chromatographic mobile phase and by using an increased plasma power input of 1300 W. The limit of detection achieved under these conditions was 1 μg L^–1 (100 μL injections). The HPLC-ICP-MS system was used for selenium speciation of selenite and selenate in aqueous solutions during a BCR certification exercise and for selenium speciation in the certified reference material, BCR No. 402 White Clover. Extraction experiments revealed that the selenium species in the biological material were extractable only in the presence of water in the extraction medium. The results indicated that selenate and a compound of unknown identity U were present in the plant sample.     

Semiempirical calculations of TiO2 (rutile) clusters

The densities of states for small (TiO₂)_x-clusters, x = 1, 3, 6, 9, and 14, have been calculated by means of the INDO method. The shape of the valence bands' density of states (DOS ) are discussed in terms of the distribution of coordination numbers. A one-slab cluster with uniform distribution of the coordination numbers was used to compare our calculations with experimental spectra. The photoelectric DOS and DOS for a cluster with an oxygen vacancy are in very good agreement with experimental findings for the TiO₂ (001) surface. O1s core level shifts between a surfacelike and a bulklike oxygen atom have been estimated. It is concluded that the observed surface–bulk shift for the TiO₂ (001) surface contains a substantial relaxation contribution. © 1992 John Wiley & Sons, Inc.