High-throughput screening of pKa values of pharmaceuticals by pressure-assisted capillary electrophoresis and mass spectrometry

A high-throughput pKa screening method based on pressure-assisted capillary electrophoresis (CE) and mass spectrometry (MS) is presented. Effects of buffer type and ionic strength on sensitivity and pKa values were investigated. Influence of dimethyl sulfoxide (DMSO) concentration present in the sample on effective mobility measurement was examined. A series of ten volatile buffers, covering a pH range from 2.5 to 10.5 with the same ionic strength, was employed. The application of volatile background electrolytes resulted in significant signal increase as compared with commonly used non-volatile phosphate buffers. In general, the CE/MS system provided a ten-fold higher sensitivity than conventional UV detection. The newly developed CE/MS method offers high-throughput capacity by pooling a number of compounds into a single sample. Simultaneous measurement of more than 50 compounds was readily achieved in less than 150 min. The measured pKa values are consistent with the published data obtained from the CE/UV method and are also in good agreement with data generated by other methods. Other advantages of using CE/MS for pKa screening are illustrated with typical examples, including poorly soluble compounds and non-UV-absorbing compounds.     

Analytical characterization of a facile porous polymer monolithic trypsin microreactor enabling peptide mass mapping using mass spectrometry

A simple and rapid single-step method is presented to fabricate an enzyme reactor using trypsin immobilized on a macroporous polymer monolith. A reactor produced in a capillary format is ready to use within 1 h of preparation. The monomers making up the monolith, including N-acryloxysuccinimide for covalent immobilization of the enzyme, are mixed with trypsin and introduced into the column by capillary force for polymerization/immobilization. The enzyme activity from column-to-column is reproducible below 5% relative standard deviation (RSD), while the reactor is durable for at least 20 weeks when stored at room temperature. The apparent kinetic constants V(max) and K(m) are of value similar to those obtained by free trypsin in solution. Enzymatic digestion of proteins was shown to be feasible on a time-scale of seconds and submicromolar concentrations enabling peptide mass mapping by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.     

Development of quantitative vitellogenin-ELISAs for fish test species used in endocrine disruptor screening

The yolk protein precursor vitellogenin (Vtg) in plasma has proved to be a simple and sensitive biomarker for assessing exposure of fish to environmental estrogens. Within international bodies such as the Organization for Economic Cooperation and Development (OECD) work is ongoing to develop screening and testing programmes for endocrine disrupting effects of new chemicals, and in the focus of this development are the fish test species common carp (Cyprinus carpio), fathead minnow (Pimephales promelas), zebrafish (Danio rerio) and Japanese medaka (Oryzias latipes). In this study we have developed quantitative enzyme linked immunosorbent assays (ELISAs) for Vtg in common carp/fathead minnow, zebrafish and Japanese medaka. The assays were developed using a combination of monoclonal and polyclonal fish Vtg antibodies in a sandwich format, using stabilized Vtg from the test species as a standard. The carp Vtg ELISA has a working range of 1–63 ng/mL, a minimal detection limit of 0.6 ng/mL, and may also be used for quantification of Vtg in fathead minnow. In fathead minnow whole-body homogenate samples, the practical detection limit is 400 ng/mL due to the matrix effect. The zebrafish Vtg ELISA has a working range of 0.5–63 ng/mL, a minimal detection limit of 0.4 ng/mL, and a practical detection limit of 200 ng/mL in whole-body homogenate samples. The medaka Vtg ELISA has a working range of 0.25–16 ng/mL, a minimal detection limit of 0.1 ng/mL, and a practical detection limit of 125 ng/mL in whole-body homogenate samples. The intra- and inter-assay variations were below 20% for all assays. The assays were evaluated with sets of representative samples spanning the wide dynamic range of Vtg-levels found in fish exposed to environmental estrogens, and all three assays are currently undergoing international inter-laboratory validation.     

A Scalable Methylamine Gas Healing Strategy for High‐Efficiency Inorganic Perovskite Solar Cells

An easy and scalable methylamine (MA) gas healing method was realized for inorganic cesium‐based perovskite (CsPbX₃) layers by incorporating a certain amount of MAX (X=I or Br) initiators into the raw film. It was found that the excess MAX accelerated the absorption of the MA gas into the CsPbX₃ film and quickly turned it into a liquid intermediate phase. Through the healing process, a highly uniform and highly crystalline CsPbX₃ film with enhanced photovoltaic performance was obtained. Moreover, the chemical interactions between a series of halides and MA gas molecules were studied, and the results could offer guidance in further optimizations of the healing strategy.     

Lipases,liposomes and lipid-prodrugs

Colloidal and interfacial phenomena lie at the core of drug formulation, drug delivery, as well as drug binding and action at diseased sites, e.g., in cancer therapy. We review a class of liposome-based drug-delivery systems whose design and functional properties are intimately controlled by the stability of sub-micron structures, lipid-bilayer interfaces, and interfacially activated enzymes that can be exploited to target and deliver drugs. Moreover these drugs can themselves be special lipid molecules in the form of lipid prodrugs that both form the liposomal carrier as well as the substrate for endogenously upregulated lipases that turn the prodrugs into potent drugs precisely at the diseased site.     

Synthesis and fluorescence properties of DMCX+—a stable oxygen-bridged [4]helicenium dye

A one-step synthesis of the stable [4]helicenium dye, 1,13-dimethoxy-chromeno[2,3,4-kl]xanthenium hexafluorophosphate (DMCX⁺) from the readily available tris(2,6-dimethoxyphenyl)carbenium ion is reported. The crystal structure, the chemical stability, and dye properties of the DMCX⁺ helicenium system are described.     

Modelling procedures and properties of rubber in rolling contact

Rubber covered cylinders in rolling contact are studied in two cases; rolling over a flat surface and rolling over a groove. In the first case, two different finite element procedures are compared for the purpose of investigating if computational savings can be made when taking amplitude dependent effects into account by using a modified viscoelastic steady state rolling procedure. This procedure is compared with using a more expensive overlay method with an elastoplastic-viscoelastic material model. The two procedures and material models are shown two give equal results in the flat surface case. For the case of rolling over a groove, it is shown how the non-linear dynamic material characteristics of the rubber layer influence the rolling contact. The groove filling capacity of the rubber is shown to be strongly dependent on the material model. It is shown that amplitude dependent rubber materials have better ability to fill out contact surface irregularities such as a groove.     

2D SMARTCyp reactivity-based site of metabolism prediction for major drug-metabolizing cytochrome P450 enzymes

Cytochrome P450 (CYP) 3A4, 2D6, 2C9, 2C19, and 1A2 are the most important drug-metabolizing enzymes in the human liver. Knowledge of which parts of a drug molecule are subject to metabolic reactions catalyzed by these enzymes is crucial for rational drug design to mitigate ADME/toxicity issues. SMARTCyp, a recently developed 2D ligand structure-based method, is able to predict site-specific metabolic reactivity of CYP3A4 and CYP2D6 substrates with an accuracy that rivals the best and more computationally demanding 3D structure-based methods. In this article, the SMARTCyp approach was extended to predict the metabolic hotspots for CYP2C9, CYP2C19, and CYP1A2 substrates. This was accomplished by taking into account the impact of a key substrate-receptor recognition feature of each enzyme as a correction term to the SMARTCyp reactivity. The corrected reactivity was then used to rank order the likely sites of CYP-mediated metabolic reactions. For 60 CYP1A2 substrates, the observed major sites of CYP1A2 catalyzed metabolic reactions were among the top-ranked 1, 2, and 3 positions in 67%, 80%, and 83% of the cases, respectively. The results were similar to those obtained by MetaSite and the reactivity + docking approach. For 70 CYP2C9 substrates, the observed sites of CYP2C9 metabolism were among the top-ranked 1, 2, and 3 positions in 66%, 86%, and 87% of the cases, respectively. These results were better than the corresponding results of StarDrop version 5.0, which were 61%, 73%, and 77%, respectively. For 36 compounds metabolized by CYP2C19, the observed sites of metabolism were found to be among the top-ranked 1, 2, and 3 sites in 78%, 89%, and 94% of the cases, respectively. The computational procedure was implemented as an extension to the program SMARTCyp 2.0. With the extension, the program can now predict the site of metabolism for all five major drug-metabolizing enzymes with an accuracy similar to or better than that achieved by the best 3D structure-based methods. Both the Java source code and the binary executable of the program are freely available to interested users.     

Tuning the metal-adsorbate chemical bond through the ligand effect on platinum subsurface alloys

Scratching beneath the surface: Pt-M(3d)-Pt(111) (M(3d) = Co, Ni) bimetallic subsurface alloys have been designed to show the ligand effect tunes reactivity in oxygen and hydrogen adsorption systems. The platinum-oxygen bond order was investigated by oxygen atom projection in the occupied and unoccupied space using X-ray emission spectroscopy (XES) and X-ray absorption spectroscopy (XAS).     

The effect of loading and particle size on the oxygen reaction in CGO impregnated Pt electrodes

Porous platinum electrodes impregnated with Gd _x Ce_1−x O_2−δ (CGO) are investigated to characterise how nano-sized CGO grains affect the oxygen reaction. Impedance measurements were performed at temperatures between 450 and 750 °C and at oxygen partial pressures of 0.2 and 5 × 10⁻⁵ bar for electrodes with various CGO loadings and electrodes annealed at various temperatures. The morphology was characterised by scanning electron microscopy and the CGO grain size was determined from X-ray diffraction peak broadening. The results showed that the polarisation resistance decreased with increasing CGO loading and increasing annealing temperature. CGO facilitates transport of oxygen ions thereby increasing the effective triple-phase boundary.