Synthesis and characterization of molybdenum oxo complexes of two tripodal ligands: reactivity studies of a functional model for molybdenum oxotransferases

Reaction of the tetradentate ligand N-(2-hydroxybenzyl)-N,N-bis(2-pyridylmethyl)amine (L-OH) with MoO2Cl2 in methanol in the presence of NaOMe and PF6- results in the formation of [MoO2(L-O)]PF6. Similarly, the reaction of N-(2-mercaptobenzyl)-N,N-bis(2-pyridylmethyl)amine (L-SH) with MoO2(acac)2 leads to the formation of [MoO2(L-S)]+. The dioxo-molybdenum complex [MoO2(L-O)]+ reacts with phosphines in methanol to afford phosphine oxides and an air-sensitive molybdenum complex, tentatively identified as [Mo(IV)O(L-O)(OCH3)]. The latter complex is capable of reducing biological oxygen donors such as DMSO or nitrate, thereby mimicking the activity of DMSO reductase and nitrate reductase. Reaction of [MoO2(L-O)]PF6 with PPh3 in other solvents than methanol leads to the formation of the Mo(V) dimer [(L-O)OMo(micro-O)MoO(L-O)](PF6)2. The crystal structures of [MoO2(L-O)]PF6 and the micro-oxo bridged dimer are presented.     

Determination of cholecalciferol (vitamin D3) in selected foods by liquid chromatography: NMKL collaborative study

Results are presented from an NMKL (Nordic Committee on Food Analysis) collaborative study of a method for the determination of cholecalciferol (vitamin D3) in foods. The method is based on the addition of an internal standard (vitamin D2), followed by saponification and extraction with n-heptane. The fraction that contains vitamin D2/D3 is separated by preparative normal-phase liquid chromatography (LC), and the analytes are determined by reversed-phase LC with UV detection at 265 nm. The method was tested by 8 participating laboratories. In this study 6 different matrixes were analyzed for cholecalciferol content: milk, liquid infant formula (gruel), cooking oil, margarine, infant formula, and fish oil. The contents varied from 0.4 to 12 microg/100 g. Three matrixes (milk, gruel, and margarine) were fortified with vitamin D3. In the other matrixes, vitamin D3 was added at 3 different levels at the Swedish National Food Administration. The milk was analyzed as a blind duplicate, whereas the other matrixes were analyzed as split-level pairs. The recoveries from the samples with vitamin D3 added varied from 93 to 102%. The repeatability relative standard deviation (RSDr) values for accepted results varied between 2.2% (fish oil) and 7.4% (cooking oil), whereas the reproducibility relative standard deviation (RSD(R)) values varied between 6.8% (margarine) and 24% (cooking oil).     

Complexometric titration of Aluminium

A procedure is given for the complexometric titration of aluminium. A known volume of a standard solution of EDTA is added to the sample solution, and the excess is back-titrated with a zinc sulphate solution, dithizone being used as indicator. The titration is performed at pH = 4.0 — 4.5 and 40 — 50% alcohol is added as solvent for the indicator.The theoretical basis of the method is developed, and the theoretical titration error with various amounts of aluminium and zinc is calculated.The results of some titrations are given.     

Chip-Firing Games on Directed Graphs

We consider the following (solitary) game: each node of a directed graph contains a pile of chips. A move consists of selecting a node with at least as many chips as its outdegree, and sending one chip along each outgoing edge to its neighbors. We extend to directed graphs several results on the undirected version obtained earlier by the authors, P. Shor, and G. Tardos, and we discuss some new topics such as periodicity, reachability, and probabilistic aspects.Among the new results specifically concerning digraphs, we relate the length of the shortest period of an infinite game to the length of the longest terminating game, and also to the access time of random walks on the same graph. These questions involve a study of the Laplace operator for directed graphs. We show that for many graphs, in particular for undirected graphs, the problem whether a given position of the chips can be reached from the initial position is polynomial time solvable.Finally, we show how the basic properties of the probabilistic abacus can be derived from our results.     

Regiochemical Control and Suppression of Double Bond Isomerization in the Heck Arylation of 1-(Methoxycarbonyl)-2,5-dihydropyrrole

Arylation of 1-(methoxycarbonyl)-2,5-dihydropyrrole under standard Heck reaction conditions produces a mixture of compounds. The olefin undergoes two types of palladium-catalyzed reactions: (a) arylation to provide C-3 arylated derivatives and (b) competing double bond isomerization. Addition of silver carbonate and thallium acetate fully suppressed the isomerization, and good yields of C-3 substituted compounds were achieved after arylation with aryl halides. With regard to aryl triflates as arylating agents, addition of lithium chloride was necessary to promote the Heck reaction. This additive excluded the use of silver and thallium salts, but high regioselectivity and good yields could be obtained by employing tri-2-furylphosphine as ligand. Arylation was rendered both regioselective and enantioselective (58% ee) with 1-naphthyl triflate as substrate utilizing a (R)-BINAP/thallium acetate combination. The C-3 arylated enamides were converted further into the corresponding 3-arylpyrrolidines.     

Investigation of a cylindrical chemosorptive denuder for sampling and phase separation of toluene diisocyanate aerosols

A cylindrical chemosorptive denuder in series with a glass fibre filter has been evaluated for sampling toluene diisocyanate (TDI) aerosols. The sampler is designed for measuring personal exposure to diisocyanates. Several denuder coatings and derivatising reagents were investigated. Dimethylpolysiloxane (SE-30) and 5% phenyl dimethylpolysiloxane (SE-54) with either dibutylamine (DBA) or dipentylamine (DPeA) as derivatising reagents yielded the lowest vapour breakthrough (the amount (%) of the vapour that passes through the denuder), close to values predicted by theory. Immobilisation of the SE-30 denuder coating by in-situ cross-linking yielded comparable results. With an SE-30/DBA-coated denuder operating within an airflow range of 100–500 mL min^–1, the phase separation was shown to be consistent with theoretical predictions derived by use of the Gormley–Kennedy equation. This provides a means of calculating the vapour breakthrough and correcting experimentally obtained values with regard to vapour–particulate phase distribution, suggesting that the denuder can provide accurate phase-distribution measurements. The SE-30/DBA denuder can be used over a concentration range spanning nearly six orders of magnitude. Its capacity is sufficient to perform 15-min exposure measurements of a TDI aerosol with air concentrations as high as 1,700 g m^–3, 40 times higher than the Swedish occupational exposure limit (OEL). At the other end of the range, the estimated limit of detection (LOD) was less than 2 ng m^–3 for both the vapour and the aerosol phases when LC–ESI–MS–MS was used for chemical analysis.Electronic Supplementary Material Supplementary material for this article is available at     

Cycloaddition reactions of 2,3-didehydrothiophene generated by flow vacuum thermolysis of thiophene-2,3-dicarboxylic anhydride

Flow vacuum thermolysis (FVT) of thiophene-2,3-dicarboxylic anhydride ($\text{2}$) in the presence of 2,3-dimethylbutadiene ($\text{6}$) gives, in addition to 5,6-dimethylthianaphthene ($\text{9}$). small quantities of a dihydrodimethylthianaphthene ($\text{12}$) and another dimethylthianaphthene ($\text{13}$) which is probably also formed by dehydrogenation of $\text{12}$ with chloranil. The partial structures of these minor products are consistent with their being formed by a [2+2]-cycloaddition between $\text{6}$ and an intermediate aryne, 2,3-didehydrothiophene ($\text{1}$), followed by a rearrangement of the resulting adduct $\text{11}$ and dehydrogenation. FVT of $\text{2}$ in the presence of 2,5- ($\text{17b}$) or 3,4-dimethylthiophene ($\text{17c}$) also gave a mixture of the dimethylthianaphthenes ($\text{18}$$\text{22}$, $\text{23}$) which can be rationalized as arising by a [4+2]- and two [2+2]-cycloadditions of the aryne $\text{1}$ to the thiophenes $\text{17}$ with subsequent desulfurization. The lack of equilibration of the products $\text{18}$, $\text{22}$ and $\text{23}$, was demonstrated and their origin as a function of the structure and reactivity of the aryne $\text{1}$ discussed.     

Dexamethasone Intravitreal Implant Is Active at the Molecular Level Eight Weeks after Implantation in Experimental Central Retinal Vein Occlusion

Central retinal vein occlusion (CRVO) is a visually disabling condition resulting from a thrombus in the major outflow vessel of the eye. The inflammatory response in CRVO is effectively treated with a dexamethasone (DEX) intravitreal implant. Uncovering the proteome changes following DEX implant intervention in CRVO may identify key proteins that mediate the beneficial effects of DEX. In six Göttingen minipigs, CRVO was induced in both eyes with an argon laser using a well-established experimental model. The right eyes were treated with a DEX intravitreal implant (Ozurdex, Allergan), while the left control eyes received a sham injection. Eight weeks after DEX intervention, retinal samples were collected and analyzed with tandem mass tag-based mass spectrometry. DEX implant intervention resulted in the upregulation of peptidyl-prolyl cis–trans isomerase FKBP5 (FKBP5) and ubiquilin-4. Immunohistochemistry showed expression of FKBP5 in the nuclei in all cellular layers of the retina. Cell adhesion molecule 3, tumor necrosis factor receptor superfamily member 16, and trans-1,2-dihydrobenzene-1,2-diol dehydrogenase were downregulated following DEX intervention. The upregulation of the corticosteroid-sensitive protein FKBP5 suggests that the implant remained active at the molecular level after eight weeks of treatment. Future studies may investigate if FKBP5 regulates the efficacy and duration of the DEX implant.