Animal models for treatment of unresectable liver tumours: a histopathologic and ultra-structural study of cellular toxic changes after electrochemical treatment in rat and dog liver

INTRODUCTION: Electrochemical treatment (EChT) has been taken under serious consideration as being one of several techniques for local treatment of malignancies. The advantage of EChT is the minimal invasive approach and the absence of serious side effects. Macroscopic, histopathological and ultra-structural findings in liver following a four-electrode configuration (dog) and a two-electrode EChT design (dog and rat) were studied. MATERIALS AND METHODS: 30 female Sprague-Dawley rats and four female beagle dogs were studied with EChT using Platinum:Iridium electrodes and the delivered dose was 5, 10 or 90 C (As). After EChT, the animals were euthanized. RESULTS: The distribution of the lesions was predictable, irrespective of dose and electrode configuration. Destruction volumes were found to fit into a logarithmic curve (dose-response). Histopathological examination confirmed a spherical (rat) and cylindrical/ellipsoidal (dog) lesion. The type of necrosis differed due to electrode polarity. Ultra-structural analysis showed distinct features of cell damage depending on the distance from the electrode. Histopathological and ultra-structural examination demonstrated that the liver tissue close to the border of the lesion displayed a normal morphology. CONCLUSIONS: The in vivo dose-planning model is reliable, even in species with larger tissue mass such as dogs. A multi-electrode EChT-design could obtain predictable lesions. The cellular toxicity following EChT is clearly identified and varies with the distance from the electrode and polarity. The distinct border between the lesion and normal tissue suggests that EChT in a clinical setting for the treatment of liver tumours can give a reliable destruction margin.     

Dynamic microwave-assisted extraction coupled on-line with solid-phase extraction: determination of polycyclic aromatic hydrocarbons in sediment and soil

This paper describes a new extraction tool for the determination of polycyclic aromatic hydrocarbons (PAHs) in soil and sediment samples, using dynamic microwave-assisted extraction combined with solid-phase extraction (DMAE-SPE). The critical variables for DMAE-SPE are investigated and optimized in an experimental design. The technique proved to be fast, accurate and able to yield quantitative extraction of PAHs from naturally contaminated sediment and soil samples. The set-up is fully automated and features monitored extraction, which facilitates rapid optimization of the method. In addition, only small quantities of solvent and sample are required.     

Synthesis,crystal structure,and magnetic properties of mu-hydroxo-bis[pentakis(acetonitrile)chromium(III)] tetrafluoroborate: an acetonitrile analogue to "acid rhodo"

The reaction of [Cr(NCCH(3))(6)](2+) with dioxygen in acetonitrile (MeCN) solution acidified with HBF(4) gave red crystals of the binuclear complex [(CH(3)CN)(5)Cr(OH)Cr(NCCH(3))(5)](BF(4))(5) (1). From the X-ray crystal structure of 1, the Cr-O-Cr angle was found to be 147.5(2) degrees. Magnetic susceptibility measurements of 1 showed an antiferromagnetic coupling between the two chromium(III) centers with a triplet energy J = 35.9(1) cm(-1). On redissolution of 1 in MeCN, the hydroxo bridge was deprotonated, and a green solution of the complex [(CH(3)CN)(5)CrOCr(NCCH(3))(5)](4+) formed. The electronic absorption spectrum of this solution is very similar to the spectrum of the classical complex [(H(3)N)(5)CrOCr(NH(3))(5)](4+) with intense bands in the UV and near-UV region. From the temperature dependence of the absorption spectrum near 12900 cm(-1), the triplet energy J was found to be 1067(19) cm(-1). The acidity of the hydroxo bridge in 1 is very high with an acid dissociation constant K(a) > 1 M.     

Synthesis,characterization, and curing of hyperbranched allyl ether–maleate functional ester resins

A model two-step synthesis of a saturated hyperbranched hydroxyl-terminated ester has been developed to show a synthesis route. Three different series of hyperbranched esters with different terminations have been synthesized to relate some of their properties to their structures. This route has then been used to synthesize three different allyl ethermaleate functional hyperbranched ester resins in a two-step procedure. The resins have been characterized with respect to rheology, structure, and properties, and the differences are discussed. The allyl ether-maleate functional resins have also been studied with respect to curing performance and final film properties. © 1993 John Wiley & Sons, Inc.     

Modified nucleosides in human serum.

Methylated purines and pyrimidines derived from the degradation of transfer ribonucleic acid have been shown to be excreted in abnormal amounts in the urine of patients with cancer. Recent technology developed by Gehrke and Kuo has allowed the separation and quantification of modified nucleosides in serum using reversed-phase high-performance liquid chromatography with diode-array measurement. Serum levels of ten modified nucleosides were measured in 37 normal healthy adults to establish normal values and to correlate activity with age and sex. In addition, serum levels of patients with several malignancies were measured to determine activity in these diseases. Levels of modified nucleosides in normal individuals were consistently reproducible and showed no significant variation among males versus females or with age. Patients with malignant diseases showed consistent elevations and these were highest in patients with more advanced disease. The evidence of no significant differences in the mean levels of modified nucleosides in serum with age or sex in normal adults and elevations in patients with malignancies demonstrate the potential value of modified nucleosides as cancer biomarkers.     

Analytical characterization of a facile porous polymer monolithic trypsin microreactor enabling peptide mass mapping using mass spectrometry

A simple and rapid single-step method is presented to fabricate an enzyme reactor using trypsin immobilized on a macroporous polymer monolith. A reactor produced in a capillary format is ready to use within 1 h of preparation. The monomers making up the monolith, including N-acryloxysuccinimide for covalent immobilization of the enzyme, are mixed with trypsin and introduced into the column by capillary force for polymerization/immobilization. The enzyme activity from column-to-column is reproducible below 5% relative standard deviation (RSD), while the reactor is durable for at least 20 weeks when stored at room temperature. The apparent kinetic constants V(max) and K(m) are of value similar to those obtained by free trypsin in solution. Enzymatic digestion of proteins was shown to be feasible on a time-scale of seconds and submicromolar concentrations enabling peptide mass mapping by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.     

Photometric titrations with indicators

Various types of photometric titration curves are discussed. If a metal M is titrated conipleximetrically using a metal indicator and the absorbance is plotted vs. the titrant consumed, the inflection point appears at a pM value defined by the equation 3 pM_infl = pM_trans + 2 pM_eqThis expression is valid when M combines in a 1 : 1 ratio with the complexing agent and the indicator and when the indicator concentration is small compared to the total metal concentration.The difference between the pM values at the inflection and equivalence points can be calculated from the equation ΔpM = pM_infl — pM_eq = $\text{1}\text{3}$(pM_trans — pM_eq) = $\text{1}\text{6}$log(C_MK²_MI/K_MY)If the inflection point is taken as the equivalence point, the error arising can be calculated from ΔpM, or more simply, read from a diagram.If transmittance, instead of absorbancc, is plotted as a function of the titrant volume, the inflection point depends on the added amount of indicator. However, at high transmittance values, i.e., at low indicator concentrations, the inflection point of a transmittance curve occurs practically at the same volume of added titrant as the inflection point of an absorbance curve. Rules are given for applying an indicator correction for the amount of metal bound to the indicator at the end-point.The derived equations and discussions can also be applied to acid-base titrations.     

Effectiveness of antioxidants: Suppression of evolution of gaseous degradation products from low-density polyethylene during thermo-oxidation

The present investigation is part of a project concerning improvements of the working environment for polymer manufacturing processes at high temperatures; for example, welding and extrusion coating.The evolution of gaseous degradation products from unstabilized and antioxidant stabilized low-density polyethylene during thermo-oxidation in air at 210°C has been studied by a simple technique using a modified gas chromatograph. Of the thirteen antioxidants investigated (phenols, phosphites, phosphonites, sulphides and metal dithiocarbamates), only phenols (radical scavengers) effectively suppress the formation of gaseous degradation products from the polymer during an induction period.The gaseous degradation products were analysed with combined gas chromatography-mass spectrometry (GC-MS), using direct trapping on the GC column (Porapak® QS). Apart from water and carbon dioxide, the major products are formaldehyde, acetaldehyde, formic and acetic acids. The addition of effective antioxidants strongly reduces the absolute amounts of the degradation products during the induction period, but does not change their relative quantities.     

Mechanism and kinetics of protein transport in chromatographic media studied by confocal laser scanning microscopy. Part I. The interplay of sorbent structure and fluid phase conditions

An experimental study on the interplay of sorbent structure and fluid phase conditions (pH) has been carried out examining adsorption and transport of bovine serum albumin (BSA) and a monoclonal antibody (IgG 2a) on SP Sepharose Fast Flow and SP Sepharose XL. SP Sepharose Fast Flow is characterised by a relatively open pore network, while SP Sepharose XL is a composite structure with ligand-carrying dextran chains filling the pore space. Both adsorbents have similar ionic capacity. Protein transport and adsorption profiles were evaluated using confocal laser scanning microscopy. Under all investigated conditions, BSA uptake could be adequately explained by a pore diffusion mechanism. The adsorption profiles obtained for IgG 2a, however, indicated that changes in fluid phase conditions as well as a change in the solid phase structure could result in a more complex uptake mechanism as compared to pore diffusion alone. This mechanism results in a fast transport of proteins into the adsorbent, followed by an overshoot of protein in the center of the sorbent and a setback towards a homogeneous adsorption profile.     

Capillary isoelectric focusing of proteins utilizing poly(vinylpyrrolidone)- and plexiglas-coated columns

Fused-silica capillaries chemically derivatized with silane/poly(vinylpyrrolidone) (PVP) or dynamically modified with plexiglas [poly(methyl methacrylate)] were prepared and evaluated with regard to column stability and separation performance for capillary isoelectric focusing of standard proteins. The PVP coating showed the better stability and was good for at least 100 runs while the plexiglas coating started to deteriorate after about 30 runs. The time spent for the plexiglas coating is about 40 minutes while the PVP coating requires two days. The migration time reproducibility was better with the PVP capillary (RSD 0.7-1.6%, n = 5) compared to the plexiglas-coated column (RSD 1.2-2.9%, n = 5) while peak area and height varied over a similar interval (RSD 2-28.1% area; 0.9-22.7% height, n = 5). The two most consistent proteins in this evaluation, viz. myoglobin A and carbonic anhydrase II, showed linear dynamic ranges between 5-150 and 5-50 microg/mL, and limits of detections at 2 and 1 microg/mL, respectively, employing UV detection at 280 nm.