InCl3-Promoted Synthesis of Pyrazolyl-Substituted Quinolines in Green Media

A series of regioisomers of pyrazolyl-substituted quinolines has been synthesized through the simple condensation reaction between hydrazinylquinolines with aliphatic 1,3-diketones with InCl₃ as a catalyst under microwave irradiation. This method produces pure products in good yield in a rapid manner compared to conventional procedures and withneat reaction condition. The approach has the advantages of operational simplicity and increased safety for a shortened synthesis of pyrazolyl-substituted quinolines.     

Influence of contact resistance and natural convection effects on non-dimensional effective thermal conductivity estimation of two-phase materials

In this article, the development of geometry dependent resistance model by considering contact resistance and natural convection effects are used to estimate the effective thermal conductivity of two-phase materials based on the unit cell approach. The algebraic equations have been derived based on isotherm approach for 2-D and 3-D spatially periodic medium. Comparison study has been made between developed models and experimental data. The result agrees well with experimental values.     

Aluminum phthalocyanine: an active and simple catalyst for cyanosilylation of aldehydes

Aluminum phthalocyanine (AlPc) in the presence of Ph₃PO acts as a highly effective catalyst for cyanosilylation of various aldehydes to the corresponding cyanohydrin trimethylsilyl ethers. The reaction proceeds smoothly with 5 mol% catalyst loading at room temperature, giving up to 96% yield. Copyright © 2007 John Wiley & Sons, Ltd.     

Bithiophene triarylborane dyad: An efficient material for the selective detection of CN− and F− ions

A new fluorescent chemosensor based on bithiophene coupled dimesitylborane (BMB-1) was synthesized and characterized. BMB-1 was used for colorimetric and turn-on fluorescent sensing of cyanide (CN⁻) and fluoride (F⁻) ions, in the presence of other competitive anions in an aqueous (CH₃CN–H₂O) medium. BMB-1 showed a hypsochromic shift (blue shift) with addition of CN⁻ and F⁻ ions in absorption studies. The lower detection level of CN⁻ and F⁻ ions is 1.37 × 10⁻⁹ and 1.75 × 10⁻⁹ M, respectively. The BMB-1 binding mechanism is based on the nucleophilic addition of CN⁻ and F⁻ ions in the internal charge transfer transition of bithio moiety to the boranylmesitylene unit, and the color changes were observed under UV light. This result is further confirmed by Fourier transform infrared spectroscopy, mass spectrometry and density functional theory calculations. Also, the BMB-1 probe is found to be a good adsorbent for the removal of F⁻ ions in real water samples using the adsorption technique.     

Numerical study on turbulent natural convection and radiation heat transfer of nanofluids in a differentially heated square enclosure

Journal of Thermal Analysis and Calorimetry - Due to the low performance observed during natural convection with fluids such as air and water, nanofluid research was carried out to analyse them for...     

Amperometric sensor for the determination of ascorbic acid based on Cobalt hexacyanoferrate modified electrode fabricated through a new route

A new approach was attempted to prepare a chemically modified electrode using Cobalt hexacyanoferrate (CoHCF) as the redox mediator and to study its stability and electrocatalytic activity for ascorbic acid (AA) oxidation. The basic principle underlying the electrode modification is the coordination of cobalt ion with the amino nitrogen of aniline adsorbed on the surface of a graphite rod. This surface was subsequently derivatized with ferrocyanide to get CoHCF film on the electrode surface. The CoHCF modified electrode as prepared above was characterized using cyclic voltammetry. The effect of scan rate, supporting electrolyte and pH of the medium on the performance of the modified electrode was investigated. The CoHCF modified electrode exhibited good electrocatalytic activity towards the oxidation of ascorbic acid and gave a linear response from 5.52 x 10(-5) M to 3.23 x 10(-2) M with a correlation coefficient of 0.9929. The detection limit was found to be 3.33 x 10(-5) M. Hydrodynamic voltammetry and chronoamperometry studies for the oxidation of ascorbic acid were also carried out. The electrode was highly stable and exhibited good reproducibility. This modified electrode was also applied for the determination of ascorbic acid in commercial samples.     

Preparation, characterization and in vitro dissolution studies of solid systems of valdecoxib with chitosan

In the present study, the solubilizing and amorphizing properties of Valdecoxib (a poorly water soluble anti inflammatory drug) with low molecular weight chitosan (a polymer), have been investigated. Binary systems of varying drug/polymer ratios were prepared using different techniques (physical mixing, co-grinding, kneading) and were tested for dissolution. Drug carrier interactions were investigated in both the liquid and solid state, by phase solubility analysis, differential scanning calorimetry, powder X-ray diffractrometry, FT-IR spectroscopy and scanning electron microscopy. The solubility of the drug increased with increasing polymer concentration showing A(N) type phase solubility diagram. Differential scanning calorimetry, powder X-ray diffractrometry and scanning electron microscopic studies of binary systems suggested generation of amorphous form of drug (in kneading and co ground mixtures). IR spectroscopy revealed the presence of hydrogen bonding in kneading and co ground mixtures. Drug dissolution was improved with increasing the polymer concentration in the mixture (Kneaded>co ground>physical mixture), which was attributed to the amorphonization and/or decreased drug crystallinity, size and polymer wetting effect. Enhanced dissolution combined with its direct compression feasibility and anti ulcerogenic action results in low molecular weight chitosan for developing fast release oral solid dosage forms of valdecoxib.     

Intramolecular electronic communication in a dimethylaminoazobenzene–fullerene C60 dyad: An experimental and TD‐DFT study

An electronically push–pull type dimethylaminoazobenzene–fullerene C₆₀ hybrid was designed and synthesized by tailoring N,N‐dimethylaniline as an electron donating auxochrome that intensified charge density on the β‐azonitrogen, and on N‐methylfulleropyrrolidine (NMFP) as an electron acceptor at the 4 and 4′ positions of the azobenzene moiety, respectively. The absorption and charge transfer behavior of the hybrid donor‐bridge‐acceptor dyad were studied experimentally and by performing TD‐DFT calculations. The TD‐DFT predicted charge transfer interactions of the dyad ranging from 747 to 601 nm were experimentally observed in the UV‐vis spectra at 721 nm in toluene and dichloromethane. A 149 mV anodic shift in the first reduction potential of the N?N group of the dyad in comparison with the model aminoazobenzene derivative further supported the phenomenon. Analysis of the charge transfer band through the orbital picture revealed charge displacement from the n_(N?N) (nonbonding) and π _(N?N) type orbitals centered on the donor part to the purely fullerene centered LUMOs and LUMO+n orbitals, delocalized over the entire molecule. The imposed electronic perturbations on the aminoazobenzene moiety upon coupling it with C₆₀ were analyzed by comparing the TD‐DFT predicted and experimentally observed electronic transition energies of the dyad with the model compounds, NMFP and (E)‐N,N‐dimethyl‐4‐(p‐tolyldiazenyl)aniline (AZNME). The n_(N?N) → π*_(N?N) and π_(N?N) → π*_(N?N) transitions of the dyad were bathochromically shifted with a significant charge transfer character. The shifting of π_(N?N) → π*_(N?N) excitation energy closer to the n → π*_(N?N) in comparison with the model aminoazobenzene emphasized the predominant existence of charge separated quinonoid‐like ground state electronic structure. Increasing solvent polarity introduced hyperchromic effect in the π_(N?N) → π*_(N?N) electronic transition at the expense of transitions involved with benzenic states, and the extent of intensity borrowing was quantified adopting the Gaussian deconvolution method. On a comparative scale, the predicted excitation energies were in reasonable agreement with the observed values, demonstrating the efficiency of TD‐DFT in predicting the localized and the charge transfer nature of transitions involved with large electronically asymmetric molecules with HOMO and LUMO centered on different parts of the molecular framework. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2010