Nanoporous Lanthanum Tungstate: A Viable Adsorbent for Heavy Metals and Organic Pollutants

Removal of heavy metal cations from synthetic and industrial electroplating effluents by means of mesoporous lanthanum tungstate sorbents was thoroughly investigated. Three types of such sorbents, namely I‐LT, II‐LT and III‐LT, uncalcined and calcined, were produced and characterized by means of X‐ray diffraction, nitrogen sorption isotherms and thermogravimetry analysis (TGA). Results of the experiments for chromium, copper, mercury, iron and lead removal from both synthetic and real industrial wastewater solutions, using these novel sorbents, exhibit promising. Details of this new approach towards wastewater treatment have been discussed and the potentials of technological advancement using mesoporous lanthanum tungstate for environmental purposes addressed. Comparison with the literature shows superiority of the produced adsorbents over reported products.     

Humidity Sensing Properties of the Sensor Based on V‐doped Nanoporous Ti0.9Sn0.1O2 Thin Film

Vanadium doped nanoporous Ti_0.9Sn_0.1O₂ thin film has been prepared on an alumina substrate by sol‐gel method with Pluronic P123 as the organic template, and humidity sensing properties of it has been investigated. It is found that V‐doped nanoporous Ti_0.9Sn_0.1O₂ thin film shows good humidity sensing properties, and impendence of it decreases more than four orders of magnitude in the relative humidity (RH) range of 11%–95% at 25°C. The response and recovery time of this sensor are about 13 and 17 s, respectively. High sensitivity, narrow hysteresis loop, rapid response and recovery, prominent stability and good repeatability are obtained. A possible mechanism is suggested to explain the humidity sensitive properties.     

Adsorptive removal of anionic dyes by modified nanoporous silica SBA-3

Batch sorption experiments were carried out to remove dyes, methyl orange (MO), orange G (OG) and brilliant red X-3B (X-3B), from their aqueous solutions using a mesoporous silica SBA-3 as an adsorbent. The effect of surfactant template in SBA-3 on the removal of OG, MO and X-3B was investigated. Experiments were carried out to investigate the influence of contact time, initial concentration, pH, and adsorbent dosage on the adsorption performance. The adsorption results of anionic dyes on the uncalcined SBA-3 (noted as SBA-3) were compared with those of the calcined SBA-3 (noted as C-SBA-3). The uncalcined SBA-3 adsorbent has a large adsorption capacity and a strong affinity for the anionic dyes. Langmuir, Freundlich and Temkin isotherms were employed to model the experimental results, from which the Freundlich isotherm exhibited the most appropriate to predict the same. Freundlich isotherm exhibited the most appropriate to predict the experimental results. The kinetic data were also analyzed through pseudo-first-order and pseudo-second-order models. The pseudo-second-order kinetic model well depicted the kinetics of dyes adsorption on mesoporous SBA-3.     

Generation of sulfate radicals by supported ruthenium catalyst for phenol oxidation in water

In this study we report the preparation of RuO₂/Fe₃O₄@nSiO₂@mSiO₂ core–shell powder mesoporous catalyst for heterogeneous oxidation of phenol by peroxymonosulfate (PMS) as oxidant. The properties of this supported catalyst were characterized by SEM–EDS (scanning electron microscopy–energy dispersive X-ray spectroscopy), XRD (powder X-ray diffraction), TEM (transmission electron microscopy), and nitrogen adsorption–desorption. It is found that using ruthenium oxide-based catalyst is highly effective in activating PMS for related sulfate radicals. The effects of catalyst loading, phenol concentration, PMS concentration, reaction temperature, and reusability of the as-prepared catalyst on phenol degradation were investigated. In RuO₂/Fe₃O₄@nSiO₂@mSiO₂ mesoporous catalyst, Oxone (PMS) was effectively activated and 100 % phenol degradation occurred in 40 min. The magnetic RuO₂/Fe₃O₄@nSiO₂@mSiO₂ catalyst was facility separated from the solution by an external magnetic field. To regenerate the deactivated catalyst and improve its catalytic properties, three different methods involving annealing in air, washing with water, and applying ultrasonics were used. The catalyst was recovered thoroughly by heat treatment.     

Adsorption of phenolic compounds from aqueous solutions using carbon nanoporous adsorbent coated with polymer

Phenolic compounds are a widespread class of water pollutants that are known to cause serious human health problems; and the demand for effective adsorbents for the removal of toxic compounds is increasing.In this work adsorption of phenol, resorcinol and p-cresol on mesoporous carbon material (CMK-1) and modified with polyaniline polymer (CMK-1/PANI) has been investigated in attempt to explore the possibility of using nanoporous carbon as an efficient adsorbent for pollutants. It was found that CMK-1/PANI exhibits significant adsorption for phenolic derivatives. Batch adsorption studies were carried out to study the effect of various parameters like adsorbent dose, pH, initial concentration and contact time. From the sorption studies it was observed that the uptake of resorcinol was higher than other phenolic derivatives. Freundlich and Langmuir adsorption isotherms were used to model the equilibrium adsorption data for phenolic compounds.     

Functionalization of silicon nanowires by iron oxide and copper for degradation of phenol

Research on Chemical Intermediates - Iron oxide (Fe3O4) and copper-functionalized silicon nanowires (SiNWs) from silicon powder mesh?<?500 with a spherical structure have been...