Synthesis of iron oxide nanoparticles using chitosan and starch templates

Natural polymers like chitosan and starch have been employed as templates for the preparation of iron oxide nanoparticles. The templates offer selective binding sites for Fe(II) under aqueous conditions. Controlled drying and subsequent removal of the template backbone enables the synthesis of spatially separated iron oxide nanoparticles. The crystalline character of the iron oxide and near narrow particle size distribution pattern have been confirmed through powder XRD, Photon Correlation Spectroscopy, and TEM measurements. The crystallite sizes of the particles were found to be 26–35 nm irrespective of the nature of the template.     

Hepatoprotective Effect of β-Chitosan from Gladius of Sepioteuthis lessoniana Against Carbon Tetrachloride-Induced Oxidative Stress in Wistar Rats

Chitosan has attracted much attention as a biomedical material, owing to its unique biological activities. In this study, hepatoprotective effect of β-chitosan obtained from the gladius of squid Sepioteuthis lessoniana was studied against carbon tetrachloride (CCl₄)-induced oxidative stress and liver injury in rats. The rats that received β-chitosan along with the administration of CCl₄ showed significantly decreased plasma and tissue alanine aminotransferase (ALT) and aspartate aminotransferase (AST) activities and total cholesterol, triglyceride (TG) and free fatty acid (FFA) contents, whereas the treatment with β-chitosan alone markedly increased rat hepatic and circulatory superoxide dismutase (SOD), catalase and glutathione peroxidase (GPx) and reduced glutathione (GSH) levels and decreased the malondialdehyde level. Histopathological observations recommended the marked hepatoprotective effect of β-chitosan. The CCl₄-induced alterations on circulatory and hepatic antioxidant defence system were normalised by β-chitosan, and it could be concluded that the hepatoprotective effect of chitosan may be due to its antioxidant and antilipidemic property. Therefore, β-chitosan could be considered as antihepatotoxic agent.     

CLAY CATALYZED SYNTHESIS OF BIO-DEGRADABLEPOLY(GLYCOLIC ACID)

Glycolic acid was polymerized under vacuum in the presence and absence of nano sized clay.The added clay catalyzed the condensation polymerization which can be confirmed by recording FTIR spectroscopy and intrinsic viscosity (Ⅳ)values.The relative intensity of C=O/CH is increased while increasing the amount of clay.DSC showed the appearance of multiple endotherms of poly(glycolic acid).TGA showed the percentage weight residue remain above 750℃for polymer-nano composite system was 21% and hence proved the...     

Nickel(II) complexes of tripodal 4N ligands as catalysts for alkane oxidation using m-CPBA as oxidant: ligand stereoelectronic effects on catalysis

Several mononuclear Ni(II) complexes of the type [Ni(L)(CH(3)CN)(2)](BPh(4))(2) 1-7, where L is a tetradentate tripodal 4N ligand such as N,N-dimethyl-N',N'-bis(pyrid-2-ylmethyl)ethane-1,2-diamine (L1), N,N-diethyl-N',N'-bis(pyrid-2-ylmethyl)ethane-1,2-diamine (L2), N,N-dimethyl-N'-(1-methyl-1H-imidazol-2-ylmethyl)-N'-(pyrid-2-ylmethyl)ethane-1,2-diamine (L3), N,N-dimethyl-N',N'-bis(1-methyl-1H-imidazol-2-ylmethyl)ethane-1,2-diamine (L4), N,N-dimethyl-N',N'-bis(quinolin-2-ylmethyl)ethane-1,2-diamine (L5), tris(benzimidazol-2-ylmethyl)amine (L6) and tris(pyrid-2-ylmethyl)amine (L7), have been isolated and characterized using CHN analysis, UV-Visible spectroscopy and mass spectrometry. The single-crystal X-ray structures of the complexes [Ni(L1)(CH(3)CN)(H(2)O)](ClO(4))(2) 1a, [Ni(L2)(CH(3)CN)(2)](BPh(4))(2) 2, [Ni(L3)(CH(3)CN)(2)](BPh(4))(2) 3 and [Ni(L4)(CH(3)CN)(2)](BPh(4))(2) 4 have been determined. All these complexes possess a distorted octahedral coordination geometry in which Ni(II) is coordinated to four nitrogen atoms of the tetradentate ligands and two CH(3)CN (2, 3, 4) or one H(2)O and one CH(3)CN (1a) are located in cis positions. The Ni-N(py) bond distances (2.054(2)-2.078(3) ?) in 1a, 2 and 3 are shorter than the Ni-N(amine) bonds (2.127(2)-2.196(3) ?) because of sp(2) and sp(3) hybridizations of the pyridyl and tertiary amine nitrogens respectively. In 3 the Ni-N(im) bond (2.040(5) ?) is shorter than the Ni-N(py) bond (2.074(4) ?) due to the stronger coordination of imidazole compared with the pyridine donor. In dichloromethane/acetonitrile solvent mixture, all the Ni(ii) complexes possess an octahedral coordination geometry, as revealed by the characteristic ligand field bands in the visible region. They efficiently catalyze the hydroxylation of alkanes when m-CPBA is used as oxidant with turnover number (TON) in the range of 340-620 and good alcohol selectivity for cyclohexane (A/K, 5-9). By replacing one of the pyridyl donors in TPA by a weakly coordinating -NMe(2) or -NEt(2) donor nitrogen atom the catalytic activity decreases slightly with no change in the selectivity. In contrast, upon replacing the pyridyl nitrogen donor by the strongly σ-bonding imidazolyl or sterically demanding quinolyl/benzimidazolyl nitrogen donor, both the catalytic activity and selectivity decrease, possibly due to destabilization of the intermediate [(4N)(CH(3)CN)Ni-O˙](+) radical species. Adamantane is selectively (3°/2°, 12-17) oxidized to 1-adamantanol, 2-adamantanol and 2-adamantanone while cumene is selectively oxidized to 2-phenyl-2-propanol. In contrast to cyclohexane oxidation, the incorporation of sterically hindering quinolyl/benzimidazolyl donors around Ni(ii) leads to a high 3°/2° bond selectivity for adamantane oxidation. A linear correlation between the metal-ligand covalency parameter (β) and the turnover number has been observed.     

Effect of s-, p-, d-, and f-block elements on the structure and properties of ammonium dihydrogen phosphate crystals

The influence of the s-, p-, d-, and f-block elements (Cs, Sb, Pd, and Ce) doping on the properties of ammonium dihydrogen phosphate (ADP) crystals has been described. Incorporation of small quantity of dopants into the crystalline matrix is well confirmed by energy dispersive X-ray spectroscopy (EDS) and inductively coupled plasma (ICP) techniques. The reduction in the intensity observed in powder X-ray diffraction (XRD) of doped specimens and slight shifts in vibrational frequencies confirm the lattice stress. Surface morphological changes due to doping of metals are observed by scanning electron microscopy (SEM). The differential scanning calorimetry (DSC) curves show only a slight variation in endothermic peak temperatures. The sharpness of the DSC peaks shows the good degree of crystallinity of the material. The cell parameters have been determined using single crystal XRD analysis of pure ADP and ADP:Cs/ADP:Sb/ADP:Pd/ADP:Ce specimens. The influence of metals on the second harmonic generation (SHG) efficiency is also investigated.     

Synthesis of 2′-deoxyguanosine containing a N2-polyamine

The synthesis of benzylated N²-(4,7,10,13-tetraazatridec-1-yl)-2′-deoxyguanosines 4 was accomplished by a key nucleophilic reaction of the novel unsymmetrical polyamine 2 , with 3′,5′-O-(tetraisopropyldisiloxane-1,3-diyl)-2-chloro-2′-deoxyinosine ( 1 ).     

Photocatalytic Degradation of Organic Reactive Dyes over MnTiO3/TiO2 Heterojunction Composites Under UV‐Visible Irradiation

In this study, the photocatalytic degradation of organic reactive dyes have been investigated using MnTiO₃/TiO₂ heterojunction composites in the presence of electron acceptors under UV‐Visible light irradiation. This MnTiO₃/TiO₂ heterojunction composites were prepared by annealing different mass ratios of pyrophanite MnTiO₃ (3–11 wt%) and TiO₂ at 300°C. All the MnTiO₃/TiO₂ heterojunction composites were characterized by spectral techniques like X‐ray diffraction (XRD), scanning electron microscope (SEM) and diffused reflectance UV‐visible spectroscopic analysis (DRS). Among them, 9 wt% MnTiO₃/TiO₂ heterojunction composites exhibited higher photocatalytic activity for the degradation of Reactive Blue 4 (RB 4). The photocatalytic efficiency of 9 wt% MnTiO₃/TiO₂ heterojunction composites was further enhanced by the addition of substantial amount of electron acceptors like hydrogen peroxide (H₂O₂) and ammonium peroxydisulfate ([NH₄]₂S₂O₈). The presence of oxidants (electron acceptors) facilitates the fast degradation of dye solution even in higher concentration upto 200 mg/L. The photocatalytic activity of MnTiO₃/TiO₂ heterojunction composites was also studied for the degradation of other four different structured reactive dyes. The extent of mineralization of these organic reactive dyes during photocatalytic degradation was estimated from COD analysis. MnTiO₃/TiO₂ heterojunction composites was also found to have good photostability in the presence of oxidants.     

The study of the changes in the thermal properties of <Emphasis Type="Italic">Labeo rohita</Emphasis> bones due to arsenic exposure

The paper presents the changes in the thermal properties of control, arsenic exposed and DMSA treated Labeo rohita bones by using thermo analytical techniques. The result shows that the mass loss due to the thermal decomposition occurs in three distinct steps due to loss of water, organic and inorganic materials. The arsenic exposed bones present a different thermal behaviour compared to the control bones. The residue masses are increased due to arsenic exposure, while the DMSA treatment reduces the residue mass level. These thermal characteristics can be used as a qualitative method to check the metal accumulation in samples.     

The growth and characterization of 2,4-dinitro phenyl hydrazone of benzophenone and mixed crystals

Good quality benzophenone (BP) crystals were grown by solution technique using CHCl₃ as solvent by adopting slow evaporation method at room temperature. The grown crystals were subjected to various characterization studies to analyze its purity and applications. The condensation product 2,4-dinitro phenyl hydrazone of benzophenone (DNPBP) was prepared by adopting standard procedure. Then mixed crystal of BP and DNPBP was also grown by solution growth. Both the condensation product and mixed crystals were characterized by UV, FTIR, ¹H NMR spectra. Thermal (TG and DTA) studies have proved to be very useful techniques not only to study the thermal properties of BP, DNPBP and mixed crystal but also to study their purity. Second harmonic generation (SHG) efficiency of the grown crystals was determined.