Racemic 2‐isopropyl‐3‐(2‐nitrobenzyl)‐1,3‐thiazolidin‐4‐one crystallizes in the space group P212121 with Z′ = 2: two different interpenetrating three‐dimensional frameworks formed by C—H...O hydrogen bonds

rac‐2‐Isopropyl‐3‐(2‐nitrobenzyl)‐1,3‐thiadiazolin‐4‐one, C₁₃H₁₆N₂O₃S, is a rare example of a racemate crystallizing in the space group P2₁2₁2₁, with one molecule each of S and R configurations, whose conformations are almost mirror images, within the asymmetric unit. The molecules of S configuration are linked by two C—H...O hydrogen bonds into a three‐dimensional framework, and the molecules of R configuration are linked by two further C—H...O hydrogen bonds into a different type of three‐dimensional framework; the two frameworks are linked by a fifth C—H...O hydrogen bond.     

Performance characteristics of analytical methods-IV

Sources of systematic errors in analytical results are discussed, and suggestions are made for the investigation and reporting of such errors when characterizing the performances of analytical methods. The four types of error considered arise from: (1) blank determinations, (2) calibration, (3) differences in the efficiencies with which different forms of the determinand are measured, and (4) interferences. The comparison of results with accepted values of standard samples or with the results obtained by standard methods is also discussed.     

Synthesis of conjugated polyrotaxanes

A series of conjugated polyrotaxane insulated molecular wires are synthesised by aqueous Suzuki polymerisation, using hydrophobic binding to promote threading of the cyclodextrin units. These polyrotaxanes have conjugated polymer cores based on poly(para-phenylene), polyfluorene, and poly(diphenylene-vinylene), threaded through 0.9-1.6 cyclodextrins per repeat unit. Bulky naphthalene-3,6-disulfonate endgroups prevent the macrocycles from slipping off the conjugated polymer chains. Dialysis experiments show that the cyclodextrins become unthreaded only if smaller stoppers are used. MALDI TOF mass spectra detect oligomers with up to ten threaded cyclodextrins, and reveal the presence of some defects that result for oxidative homo-coupling of boronic acids. Weight-average molecular weights were determined by analytical ultracentrifugation, demonstrating that step-growth polymerisation is efficient enough to achieve degrees of polymerisation up to approximately 20 repeat units (84 para-phenylenes). The fluorescence spectra of these polyrotaxanes indicate that the presence of the threaded cyclodextrin macrocycles reduces the flexibility of the conjugated polymer pi-systems. Both the solution and the solid-state photoluminescence quantum yields are enhanced upon threading of the conjugated polyaromatic cores through alpha- or beta-cyclodextrins, and the emission spectra of the polyrotaxanes are blue-shifted compared to the corresponding unthreaded polymers. The greater weight of the 0-0 transition in the emission spectra, as well as the smaller Stokes shift, indicate that the polyrotaxanes are more rigid than the unthreaded polymers.     

An automatic controlled-potential coulometer

The design and operation of an automatic controlled-potential coulometer is described. It was primarily designed for use with mg quantities of uranium, neptunium and plutonium but can in principle be used on any element possessing more than one valency state in solution. It is capable of an accuracy and precision of ±0.25% and can analyse up to 20 samples on a set programme without operator attention.     

Mass spectrometric methods for the analysis of chlorinated and nitrated isoflavonoids: a novel class of biological metabolites

Electrospray ionization combined with tandem mass spectrometry was applied to a study of some representative chlorinated and nitrated isoflavones-potential metabolites of isoflavones in inflammatory cells. Upon collision-induced dissociation of deprotonated [M - H](-) ions of these compounds, a number of structurally characteristic product ions were produced. The product ion analysis of 3'- and 8-chlorodaidzein in the tandom mass spectra led to ready differentiation of these isomers. 3-Nitro derivatives of both genistein and daidzein have product ions due to the losses of HNO(2) and two OH groups. Chlorinated derivatives of isoflavones were detected in cell-based experiments and their structures were proposed by comparing the tandem mass spectra of their product ions with those of standards. This work provides a suitable analytical basis to aid the characterization of chlorinated and nitrated metabolites in studies in vivo and in vitro.     

Electrochemical templating of metal nanoparticles and nanowires on single-walled carbon nanotube networks

The use of single-walled carbon nanotube (SWNT) networks as templates for the electrodeposition of metal (Ag and Pt) nanostructures is described. Pristine SWNTs, grown on insulating SiO2 surfaces using catalyzed chemical vapor deposition, served as the working electrode. In the simplest case, electrical contact was made by depositing a gold strip on the SWNT substrate (device 1). Deposition of Ag and Pt over extensive periods (30 s) resulted in a high density of particles on the SWNTs, with almost contiguous nanowire formation from the Au/SWNT boundary moving to isolated nanoparticles at further distances from the contact. For direct electrochemical studies of Ag and Pt nucleation, the assembly was coated in a resist layer and a small window opened up to expose only the electrically connected SWNTs to solution (device 2). In this case, the electrochemical signature in voltammetric and amperometric studies of metal deposition was due solely to processes at the SWNTs. Coupled with high-resolution microscopy measurements (atomic force microscopy and field emission scanning electron microscopy), this approach provided detail on the nucleation and growth mechanisms of Ag and Pt on SWNTs under electrochemical control. In particular, Ag growth was found to be rapid and progressive with an increasing nanoparticle density with time, whereas Pt deposition was characterized by lower nucleation densities and slower growth rates with a tendency for larger particles to be produced over long times.     

Dioxygenyl salts containing doubly charged mononuclear counterions

Evidence is presented for the existence of (O₂⁺)₂MF₆^2?(M=Ni,Mn) salts. These salts are marginally stable up to about 10°C and are characterized by an OO stretching frequency of about 1805 cm^?1.     

Conformational analysis3̄CXXIV: The conformation of ring A in the 4,4-dimethyl-3-androstanone system. The crystal structure of 4,4-dimethylandrostan-3-on-17β-yl benzoate

Molecular mechanics calculations indicate that the deformed chair and twisted-boat conformations are similar in energy for a 4,4-dimethyl-3-keto steroid. Earlier dipole moment work on such compounds is discussed. The crystal structure of 4,4-dimethylandrostan-3-on-17β-yl benzoate has been determined. The crystals are orthorhombic, P2₁2₁2₁, a = 17.096 (2), b = 22.136 (e), c = 6.217 (1) A. The structure was solved by direct methods and refined by least squares to R ? 0.039, R_XXX = 0.038, based on 2168 observed reflections. Ring A is shown to exist in a chair form, deformed as indicated by the calculations.     

Termolecular ion-molecule reactions in Titan’s atmosphere. II: The structure of the association adducts of HCNH+ with C2H2 and C2H4

The ion-molecule reactivity of the products formed in the association reactions of HCNH+ with C2H2 (C3H4N+) and C2H4 (C3H6N+) has been investigated to provide information on the structures of the adducts thus formed. The C3H4N+ and C3H6N+ adducts were formed in the reaction flow tube of a flowing afterglow sourced-selected ion flow tube (FA-SIFT) and their reactivity with a neutral molecular "probe" examined. The reactivity of possible known structural isomers for the C3H4N+ and C3H6N+ ions was investigated in both the FA-SIFT and an ion cyclotron resonance spectrometer (ICR). Ab initio investigations of the potential energy surfaces for both structures at the G2(MP2) level have also been performed and structures corresponding to local minima on both surfaces have been identified and evaluated. The results of these experimental and theoretical studies show that at room temperature, the C3H4N+ adduct ion contains two isomers; a less reactive one that is likely to be a four-membered cyclic covalent isomer (approximately 70%) and a faster reacting component that is probably an electrostatic complex (approximately 30%). The C3H6N+ adduct ion formed from HCNH+ + C2H4 at room temperature is a single isomer that is likely to be the four-membered covalently bound cyclic CH2CH2CHNH+ species.     

Fast reduction of a copper center in laccase by nitric oxide and formation of a peroxide intermediate

The rapid reduction of one of the copper atoms (type 2) of tree laccase by nitric oxide (NO) has been detected. Addition of NO to native laccase in the presence of oxygen leads to EPR changes consistent with fast reduction and slow reoxidation of this metal center. These events are paralleled by optical changes that are reminiscent of formation and decay of the peroxide intermediate in a fraction of the enzyme population. Formation of this species is only possible if the trinuclear copper cluster (type 2 plus type 3) is fully reduced. This condition can only be met if, as suggested previously, a fraction of the enzyme contains both type 3 coppers already reduced before addition of NO. Our data are consistent with this assumption. We have suggested recently that fast reduction of copper is the mechanism by which NO interacts with the oxidized dinuclear center in cytochrome c oxidase. The present experiments using laccase strongly support this view and suggest this reaction as a general mechanism by which copper proteins interact with NO. In addition, this provides an unexploited way to produce a stable peroxide intermediate in copper oxidases in which the full complement of copper atoms is present. This enables the O-O scission step in the catalytic cycle to be studied by electron addition to the peroxide derivative through the native electron entry site, type 1 copper.