Brush-type chiral stationary phase for enantioseparation of acidic compounds. Optimization of chiral capillary electrochromatographic parameters

The capillary electrochromatographic separations of three acidic enantiomers (carprofen, coumachlor and warfarin) were studied on a capillary column packed with 5 microm (3R,4S)-Whelk-O 1 chiral stationary phase. The influence of several experimental parameters (mobile phase pH, type of background electrolyte, acetonitrile ratio, temperature, applied voltage and ionic strength) on electroosmotic flow velocity, retention factor, selectivity factor, efficiency, resolution and effectiveness of chiral separation was evaluated. It was notable that the optimum resolution of the acidic enantiomers was achieved at pH 3.0 phosphate buffer, suggesting that capillary electrochromatography in the ion-suppressed mode can be applied for chiral separations of a range of acidic compounds.     

Chiral separation of anionic and neutral compounds using a hepta-substituted cationic beta-cyclodextrin as a chiral selector in capillary electrophoresis

Enantiomeric separations of six anionic and two neutral racemates were achieved using a fully substituted heptakis(6-hydroxyethylamino-6-deoxy)-beta-cyclodextrin (beta-CD-EA) as a chiral selector. As beta-CD-EA provides a dynamic coating on the capillary wall, reverse-polarity capillary electrophoresis (CE) configuration is applied for separations of anionic and neutral chiral compounds. Chiral separations of various classes of anionic and neutral enantiomers were found to be highly dependent on pH because the degree of protonation of beta-CD-EA can alter the shape of the CD cavity by charge repulsion, altering complexation, aiding selectivity, and leading to better enantiomeric separation. In general, the chiral resolution of anionic enantiomers was enhanced at higher pH. This suggests that carboxylate or phosphate groups on the analyte may interact with the protonated amine groups of cationic CD. The successful enantioseparation was achieved in a pH range of 6.6-7.8 for all six anionic analytes, in the presence of 10 mM beta-CD-EA.     

Electrokinetic chromatography of twelve monomethylbenz[a]anthracene isomers using a polymerized anionic surfactant

A method for the separation of twelve monomethyl-substituted benz[a]anthracene isomers using poly-(sodium undecylenic sulfate) (poly-SUS) surfactant by means of electrokinetic capillary chromatography (EKC) is described. Several parameters such as concentration of acetonitrile (ACN), pH, as well as applied voltage were studied to optimize the EKC separation. ACN at a concentration of 35% v/v, 12.5 mM phosphate-borate buffer, 30 kV with 0.5% w/v poly-SUS at a pH of 9.5 provided a resolution of a mixture of nine out of twelve methylbenz[a]anthracene (MBA) isomers in 50 min. The results of this study suggest that molecular length of MBA rather than length-to-breath ratio plays an important role in the elution order of some isomers.     

Semiconductor quantum dots and metal nanoparticles: syntheses,optical properties,and biological applications

We review the syntheses, optical properties, and biological applications of cadmium selenide (CdSe) and cadmium selenide–zinc sulfide (CdSe–ZnS) quantum dots (QDs) and gold (Au) and silver (Ag) nanoparticles (NPs). Specifically, we selected the syntheses of QDs and Au and Ag NPs in aqueous and organic phases, size- and shape-dependent photoluminescence (PL) of QDs and plasmon of metal NPs, and their bioimaging applications. The PL properties of QDs are discussed with reference to their band gap structure and various electronic transitions, relations of PL and photoactivated PL with surface defects, and blinking of single QDs. Optical properties of Ag and Au NPs are discussed with reference to their size- and shape-dependent surface plasmon bands, electron dynamics and relaxation, and surface-enhanced Raman scattering (SERS). The bioimaging applications are discussed with reference to in vitro and in vivo imaging of live cells, and in vivo imaging of cancers, tumor vasculature, and lymph nodes. Other aspects of the review are in vivo deep tissue imaging, multiphoton excitation, NIR fluorescence and SERS imaging, and toxic effects of NPs and their clearance from the body. Figure Semiconductor quantum dots and metal nanoparticles have extensive applications, e.g., in vitro and in vivo bioimaging Tamitake Itoh and Abdulaziz Anas contributed equally to this article.     

Glycine-based polymeric surfactants with varied polar head group: I. synthesis, characterization, and application in micellar electrokinetic chromatography

The monomers and polymers of four anionic amide type sodium undecenoxy carbonyl glycinate (SUCG) surfactants and four anionic carbamate type sodium undecenoyl glycinate (SUG) surfactants with 1-, 2-, 3-, and 4-glycine unit as head group were synthesized and characterized. The CMC and aggregation number (A) for all eight surfactants were determined using fluorescence spectroscopy. In addition, the CMC values of these surfactants were also projected by surface tension and CE. The CMC of the monomers decreases with increases in the size of glycine head groups and correlates well when the fluorescence method was compared to CE. The A number increases and partial specific volume (V) decreases with increase in size of the head group of both monomers and polymers. However, A and V are always lower for the polymers than the corresponding monomers. The electrophoretic and chromatographic parameters of micelle polymers of SUG and SUCG were also examined. The coefficient of EOF increases with the increase in size of the head group but the electrophoretic mobility decreases which results in a decrease in the elution range. The retention data suggest that the selectivity differences among the mono-, di-, and tripeptide derivatives of poly-SUCG surfactants are relatively higher compared to the derivatives of poly-SUG series.     

Nickel oxide nanoparticles decorated graphene quantum dot as an effective electrode modifier for electrocatalytic oxidation and analysis of clozapine

In the present work, a novel, simple, and sensitive clozapine (CLZ) sensor was developed based on nickel oxide nanoparticle (NiO)-decorated graphene quantum dot (GQD)-modified glassy carbon electrode (NiO/GQD/GCE). NiO/GQD/GCE was prepared by simple electrodeposition, the electrochemical behavior of CLZ at the surface of the prepared electrode was studied by cyclic voltammetry (CV) and differential pulse voltammetry (DPV), and an improved reversibility and increased peak current with negative shift in the oxidation potential were observed at the proposed electrode. The effect of some experimental parameters has been examined, and based on the results, an electron transfer–chemical reaction–electron transfer mechanism has been proposed for CLZ electrooxidation. The differential pulse voltammetric response of the NiO/GQD/GCE was linear to the concentration of CLZ in the range of 3?×?10^?9 to 1?×?10^?6 M, and the detection limit was found to be 0.55 nM (S/N?=?3). The method has been successfully used for the selective determination of the CLZ amount in the pharmaceutical preparations and human serum samples with good accuracy and precision.     

Separation of short and medium-chain fatty acids using capillary electrophoresis with indirect photometric detection: Part I: Identification of fatty acids in rat feces

Short and medium-chain fatty acids (SMCFAs) are known as essential metabolites found in gut microbiota that function as modulators in the development and progression of many inflammatory conditions as well as in the regulation of cell metabolism. Currently, there are few simple and low-cost analytical methods available for the determination of SMCFA. This report focuses on SMCFA analysis utilizing CE with indirect photometric detection (CE-IPD). A ribonucleotide electrolyte, 5’-adenosine mono-phosphate (5’-AMP), is investigated as an IPD reagent due to its high molar absorptivity and dynamic reserve compatible with separation and detection of SMCFA. The operating parameters like the composition of organic solvent, millimolar concentrations of the complexing agent (alpha-cyclodextrin), 5’-AMP and non-absorbing electrolyte (boric acid), as well as the applied voltage, are optimized for resolution, efficiency, and signal-to-noise ratio. A baseline resolution of all nine SMCFAs is achieved in less than 15 min. Additionally, the developed CE-IPD method shows promising potential to identifying SMCFA in rat fecal supernatant. The presented analytical assay is simple, economical, and has considerably good repeatability. The intraday and interday RSD of less than 1 and 2% for relative migration time, as well as less than 14 and 15% for peak area, respectively, were obtained for SMCFA in fecal solution.     

Multivariate approach for the enantioselective analysis in micellar electrokinetic chromatography-mass spectrometry: I. Simultaneous optimization of binaphthyl derivatives in negative ion mode

A mixture of two molecular micelles polysodium N-undecenoxy carbonyl-l-leucinate, (poly-l-SUCL) and polysodium N-undecanoyl leucylvalinate, (poly-l-SULV) was utilized in micellar electrokinetic chromatography-electrospray ionization-mass spectrometry (MEKC-ESI-MS) to simultaneously separate and detect enantiomers of binaphthyl derivatives. Separation parameters such as background buffer composition, voltage, temperature, and nebulizer pressure were optimized using a multivariate central composite design (CCD). Baseline enantioseparation for both analytes was achieved. The CCD was also used in the optimization of sheath liquid and spray chamber parameters to achieve optimum ESI-MS response. The results demonstrate that CCD is a powerful tool for the optimization of MEKC-MS parameters and the response surface model analysis can provide in-depth statistical understandings of the significant factors required to achieve maximum enantioresolution and ESI-MS sensitivity.     

Routes toward enantiopure 2-substituted indolines: an overview

Chiral-2-substituted indolines are an important class of compounds with numerous applications in organic synthesis and as constituents of a number of biologically active molecules. Consequently, there has been a continued interest in the development of efficient methods for the syntheses of this class of chiral compounds. In this review, a detailed survey of the important efforts toward the synthesis of enantioenriched 2-substituted indolines by means of the kinetic resolution or the use of a chiral auxiliary in stoichiometric or catalytic processes is provided. The resolution of racemic mixtures through diastereomeric separation is not considered in the article.