Nomenclature of polymers (based on structure)

In the complete absence of a systematic polymer nomenclature, a scheme of nomenclature based on structure is proposed. The problem of naming a “mer” has been solved for an addition polymer by adding “ne” to the monomer name, the justification being on withdrawal of a π bond a monomer becomes a mer. To furnish completeness to the nomenclature, condensation polymers were included in the system. The present nomenclature system of polymers is very arbitrary. Some polymers are not chemically named, some named incorrectly, and there are some fantastic names. After pointing these out, the possible solutions were shown, encompassing a systematic discussion on nearly every type of polymer–linear, branched, or crosslinked–and copolymer (including block or graft), and plastic, fiber, or rubber, and stereospecific polymer. One or more names were proposed for different cases.     

Removal of actinides and fission products activity from intermediate alkaline waste using inorganic exchangers

Hydrated iron oxide or amorphous-Fe₂O₃·3.5 H₂O (HFeO), hydrated titanium oxide (HTiO) and hydrated thorium oxide (HThO) were synthesized and their applicability for the decontamination of intermediate level liquid wastes (ILLW) was tested. The sorption of a few actinides like plutonium and americium on HFeO, ¹³⁷Cs and ¹⁰⁶Ru on HTiO and ⁹⁰Sr on HThO was investigated as a function of pH, time and loading capacity of the hydrous oxide with metal ions. The influence of the total dissolved salt content was also monitored. Some of these parameters influenced the sorption behavior significantly. The radiation stability of these inorganic sorbents were studied by irradiating them up to 48 Mrad. Adsorbed actinides and fission products were successfully eluted from HFeO and from the mix-bed of HTiO and HThO by 0.5M nitric acid.The authors wish to thank Shri R. D. Changarani, Chief Superintendent NRG Facilities and Shri P. K. Dey, Head FRD for their valuable advice and constant support.     

A simple autonull-type servo-controlled electronic balance for thermogravimetric applications

A simple electronic autonull-type recording balance using a helical quartz spring is described. Deviation from the null position is detected by a pair of photoemissive cells. The error signal generated across the cells as a result of weight change is processed by a servo-system which, in turn, produces an electric current in the balancing coil proportional to the force required to restore the null position. This current, recorded as the potential drop across a standard resistor, is a direct measure of the weight change.The balance has good linear response and can record weight changes up to 150 mg. The performance of the balance was tested in a thermogravimetric set-up, by studying the decomposition in air of the oxalates of copper, nickel and magnesium. The decomposition of nickel oxalate was also studied in flowing hydrogen. The weighing accuracy of the balance, compared against a Mettler model H-15 single-pan balance, was found to be within±1.5%.

---

Zusammenfassung Eine einfache elektronische registrierende Quartz-Spiralfeder Kompensationswaage wird beschrieben. Die Abweichung von der Nullposition wird durch zwei Photoemissionszellen angezeigt. Das infolge der Gewichtsänderung durch die Zellen erzeugte Fehlersignal wird durch ein Servosystem empfangen, das seinerseits in der Ausgleichsspirale einen elektrischen Strom erzeugt, der proportional zur für die Wiederherstellung der Null-position benötigten Kraft ist. Dieser Strom, der als Spannungsgefälle in einem Standardwiderstand registriert wird, ist eine direkte Maßzahl der Gewichtsänderung.Die Waage zeigt ein gutes lineares Verhalten und kann Gewichtsänderungen bis zu 150 mg registrieren. Die Leistung der Waage wurde in einer thermogravimetrischen Vorrichtung durch Untersuchungen der Zersetzung der Oxalate von Kupfer, Nickel und Magnesium in Luft geprüft. Die Zersetzung von Nickeloxalat wurde auch in strömendem Stickstoff untersucht. Die Meßgenauigkeit der Waage, vergleichen mit der Einschalenwaage Mettler H-15 wurde im Bereich von±1.5% gefunden.

---

Résumé On décrit une balance électronique enregistreuse simple du type auto-zéro, à hélice de quartz. La déviation de la position zéro est décelée par une paire de cellules photoémissives. Le signal de déséquilibre décelé par les photocellules et résultant d'un changement de poids, est reçu par un système asservi qui, à son tour, produit un courant électrique dans la bobine de la balance, proportionnel à la force nécessaire pour rétablir la position zéro. Ce courant, enregistré comme chute de potentiel dans une résistance étalon, est une mesure directe du changement de poids.La balance donne une bonne réponse linéaire et peut enregistrer des changements de poids allant jusqu'à 150 mg. Ses caractéristiques ont été examinées dans un montage thermogravimétrique, en étudiant la décomposition dans l'air des oxalates de cuivre, nickel et magnésium. La décomposition de l'oxalate de nickel a aussi été étudiée sous courant d'hydrogène. L'exactitude de la balance, comparée à celle d'un modèle Mettler monoplateau (type H-15), coïncide à±1.5%.

---

, . . , , -, , . , , . 150 . , . . -15 +1.5%.

---

---

The authors wish to express their thanks to Mr. S. P. Sen, Manager. Catalyst Development and Production Department of Fertilizer (Planning and Development) India Limited, for his keen interest and valuable suggestions.     

Synthesis and metal ion complexing properties of novel chromogenic cryptands

Four novel chromogenic benzocryptands and one side-armed chromogenic cryptand have been synthesized and their complexing abilities for alkali metal cations are described.     

Enantioselective synthesis of d-ribo-(2S,3S,4R)-C18-phytosphingosine using double stereodifferentiation

An enantioselective synthesis of d-ribo-C₁₈-phytosphingosine as its tetraacetate derivative 10, starting from d-mannitol and employing the Sharpless asymmetric dihydroxylation reaction on allylic alcohol 6 as the key step, is described.     

Fourth-derivative spectrophotometric determination of fungicide ferbam (iron(III) dimethyldithiocarbamate) in a commercial sample and wheat grains using 2,2′-bipyridyl

A procedure has been developed for the direct fourth-derivative spectrophotometric determination of iron(III) dimethyldithiocarbamate by converting it into an iron(II) 2,2'-bipyridyl complex, which is then dissolved in Triton X-100. Beer's law is obeyed over the concentration range 0.5-20 microg mL(-1 )in the final solution. Various parameters such as the effect of pH and interference of large number of ions on the determination of ferbam have been studied in detail. The method is sensitive, highly selective and can be used for the determination of ferbam in a commercial sample and in mixtures with various dithiocarbamates (ziram, zineb, maneb, etc.) and from wheat grains.     

195Pt, 1H and 31P PGSE diffusion studies on platinum complexes

The first example of the use of (195)Pt PGSE diffusion data (D values) to recognize the solvent dependence of aggregation of the hexachloroplatinate dianion in Na(2)PtCl(6) (1) and in H(2)PtCl(6) (2) is reported. In water, the ions are separated; however, in methanol the D values suggest ion pairing and/or aggregation. Additional (1)H and (31)P diffusion data for organometallic Pt complexes trans-PtX(Aryl)(L)(2) (where L = PEt(3) or PPh(3)) and Pt(C(7)H(4)O(2))(L(1))(L(2)) (where L(1) and L(2) = a variety of ligand types) reveal that phenyl phosphines afford relatively large hydrodynamic radii r(h). The presence of a substituent on the aryl ligand of PtX(Aryl)(L)(2) does not markedly affect the D values, whereas a substituent of similar size added to a PPh(3) group in Pt(C(7)H(4)O(2))(L(1))(L(2)) markedly changes both D and r(h) values. There is only a small concentration dependence of the D values in PtX(Aryl)(L)(2) on changing from 2 to 10 mM.     

Electron depleted bis(methylene)cyclobutenes: sulfinyl and sulfonyl substitution

Double [2,3] sigmatropic rearrangements of bis(propargyl sulfenates) to bis(allenic sulfoxides) and of bis(propargyl sulfinates) to bis(allenic sulfones) are shown to be a convenient and effective method for the preparation of conjugated diallene systems bearing two electron withdrawing trihalomethyl sulfoxide or sulfone substituents either on C-1 and C-6, or on C-3 and C-4. Such substituents are further shown to facilitate cyclization to bis(methylene)cyclobutenes, and to stabilize the latter. The electron withdrawing group substitution on the exocyclic methylene extremities proved more effective than similar substitution on the endocyclic double bond.     

Mechanism of iridium(III) catalysis in the oxidation of diols by N-bromoacetamide

Summary The kinetics of iridium(III)-catalysed oxidation of 1,2-ethanediol and 1,4-butanediol by N-bromoacetamide (NBA) in HClO₄ in the presence of [Hg(OAc)₂] as a scavenger for Br^– have been investigated. The reactions are zero-order with respect to both diols, and first-order in NBA at low NBA concentrations, tending to zero order at high concentrations. The order in Ir^III decreases from unity to zero at high iridium(III) concentrations. A positive effect on the oxidation rate is observed for [H⁺] and [Hg^II] whereas a negative effect is observed for acetamide and [Cl^–]. Ionic strength does not influence the oxidation rate. (H₂OBr)⁺ is postulated as the oxidizing species. A mechanism consistent with the observed kinetic data is proposed.