Sample stacking with matrix removal for the determination of paraquat, diquat and difenzoquat in water by capillary electrophoresis

Conditions for the simultaneous determination of paraquat, diquat and difenzoquat by capillary zone electrophoresis using a stacking technique in a chemically modified capillary have been established. To apply the stacking method with sample matrix removal for the analysis of cations, an anodic electroosmotic flow is mandatory. For quats, 50 mM acetic acid-ammonium acetate (pH 4.0) with 5% (v/v) methanol as electrophoretic buffer and the addition of 0.8 mM cetyltrimethylammonium bromide as wall capillary organic modifier was proposed. Field polarity reversal time was optimised for several sample matrices. Detection was carried out at 220 and 255 nm. Detection limits, based on a signal-to-noise ratio of 3:1, were lower than 15 microg l(-1) for standards in Milli-Q water and two to ten times higher for drinking water samples. Run-to-run and day-to-day reproducibility have been established. The method was successfully applied to the determination of the three herbicides in spiked drinking water.     

Silicon determination in milk by electrothermal atomic absorption spectrometry using palladium as chemical modifier

A direct method for silicon determination in milk samples by Electrothermal Atomic Absorption Spectrometry was developed. Palladium was used as chemical modifier at a concentration of 610 mg L(-1); with this modifier, silicon was stable up to 1800 degrees C. The precision and accuracy of the method were investigated. The detection limit was 16.2, 2.7 and 7.2 micro g L(-1) for cows' milk, human milk and infant formula, respectively. The method was applied to silicon determination in 17 infant formula samples, 13 human milk samples and 12 cows' milk samples.     

Conformation of glycomimetics in the free and protein-bound state: structural and binding features of the C-glycosyl analogue of the core trisaccharide alpha-D-Man-(1 --> 3)-[alpha-D-Man-(1 --> 6)]-D-Man

The conformational properties of the C-glycosyl analogue of the core trisaccharide alpha-D-Man-(1 --> 3)-[alpha-D-Man-(1 --> 6)]-D-Man in solution have been carefully analyzed by a combination of NMR spectroscopy and time-averaged restrained molecular dynamics. It has been found that both the alpha-1,3- and the alpha-1,6-glycosidic linkages show a major conformational averaging. Unusual Phi ca. 60 degrees orientations for both Phi torsion angles are found. Moreover, a major conformational distinction between the natural compound and the glycomimetic affects to the behavior of the omega(16) torsion angle around the alpha-1 --> 6-linkage. Despite this increased flexibility, the C-glycosyl analogue is recognized by three mannose binding lectins, as shown by NMR (line broadening, TR-NOE, and STD) and surface plasmon resonance (SPR) methods. Moreover, a process of conformational selection takes place, so that these lectins probably bind the glycomimetic similarly to the way they recognize the natural analogue. Depending upon the architecture and extension of the binding site of the lectin, loss or gain of binding affinity with respect to the natural analogue is found.     

Model-free kinetics applied to regeneration of coked alumina

Thermogravimetry is proposed to study the alumina catalyst regeneration deactivated by coke, after being used in the transformation of styrene in a fixed bed continuous flow reactor. The model-free kinetic approach has been applied to data for the thermal oxidation of carbonaceous deposits on the catalyst. The activation energy (E) was calculated as a function of a (conversion) and T (temperature), by using Vyazovkin model-free kinetic method, allowing to estimate time required to remove coke at a given temperature. This revised version was published online in August 2006 with corrections to the Cover Date.     

Determination of salicylate in blood serum using an amperometric biosensor based on salicylate hydroxylase immobilized in a polypyrrole-glutaraldehyde matrix

The use of an amperometric biosensor for the salicylate determination in blood serum is described. The biosensor is based on salicylate hydroxylase (EC 1.14.13.1) electropolymerized onto a glassy carbon-working electrode with polypyrrole and glutaraldehyde, to improve the biosensor lifetime. The hexacyanoferrate (II) was also incorporated to work as a redox mediator to minimize possible interferences. The salicylate is enzymatically converted to catechol, which is monitored amperometrically by its electrooxidation at+0.170 V versus SCE (saturated calomel electrode). Salicylate determination was carried out maintaining the ratio between beta-NADH and salicylate at 4:1 (30 degrees C). The amperometric response of the biosensor was linearly proportional to the salicylate concentration between 2.3x10(-6) and 1.4x10(-5) mol l(-1), in 0.1 mol l(-1) phosphate buffer (pH 7.8), containing 0.1 mol l(-1) KCl and 5.0x10(-4) mol l(-1) Na(2)H(2)EDTA, as supporting electrolyte. The recovery studies, in the presence of several interfering compounds, showed recoveries between 96.4 and 104.8%. The useful lifetime of the biosensor in the concentration range evaluated was at least 40 days, in continuous use. Blood serum samples analyzed by this biosensor showed a good correlation compared to the spectrophotometric method (Trinder) used as reference, presenting relative deviations lower than 7.0%.     

Generation of Molecular Fields, Quantum Similarity Measures and Related Questions

A straightforward discussion on how to generate molecular fields is developed within the postulates of quantum mechanics. The theoretical formalism points towards the generalization and extension of the well-known molecular field forms, associated to density function and electrostatic molecular potential (EMP), including another category of fields associated to quantum molecular similarity measures. The results show that the new formalism can be easily applied to obtain an unlimited number of new information about molecular behavior.     

Sequence-dependent conformational energy of DNA derived from molecular dynamics simulations: toward understanding the indirect readout mechanism in protein-DNA recognition

Sequence dependence of DNA conformation plays a crucial role in its recognition by proteins and ligands. To clarify the relationship between sequence and conformation, it is necessary to quantify the conformational energy and specificity of DNA. Here, we make a systematic analysis of dodecamer DNA structures including all the 136 unique tetranucleotide sequences at the center by molecular dynamics simulations. Using a simplified conformational model with six parameters to describe the geometry of adjacent base pairs and harmonic potentials along these coordinates, we estimated the equilibrium conformational parameters and the harmonic potentials of mean force for the central base-pair steps from many trajectories of the simulations. This enabled us to estimate the conformational energy and the specificity for any given DNA sequence and structure. We tested our method by using sequence-structure threading to estimate the conformational energy and the Z-score as a measure of specificity for many B-DNA and A-DNA crystal structures. The average Z-scores were negative for both kinds of structures, indicating that the potential of mean force from the simulation is capable of predicting sequence specificity for the crystal structures and that it may be used to study the sequence specificity of both types of DNA. We also estimated the positional distribution of conformational energy and Z-score within DNA and showed that they are strongly position dependent. This analysis enabled us to identify particular conformations responsible for the specificity. The presented results will provide an insight into the mechanisms of DNA sequence recognition by proteins and ligands.     

Reductive PET cycloreversion of oxetanes: singlet multiplicity, regioselectivity, and detection of olefin radical anion

Cycloreversion of 2-(p-cyanophenyl)-4-methyl-3-phenyloxetane (1) is achieved using 1-methoxynaphthalene (2) as electron-transfer photosensitizer. The experimental results are consistent with the reaction taking place from the singlet excited state of the sensitizer. Ring splitting of the radical anion 1*- occurs with cleavage of O-C2 and C3-C4 bonds, leading to products (acetaldehyde and p-cyanostilbene) different from the reagents used in the Paterno-Büchi synthesis of 1. The olefin radical anion involved in the electron-transfer process has been detected by means of laser flash photolysis.     

Hydrogen bonds of RNA are stronger than those of DNA, but NMR monitors only presence of methyl substituent in uracil/thymine

Recently, Vakonakis and LiWang (J. Am. Chem. Soc. 2004, 126, 5688) reported experimental evidence for stronger hydrogen bonds in RNA A:U than in DNA A:T base pairs, which was based on differences in NMR shielding for adenine C2. We have analyzed the proposed correlation between NMR shielding and hydrogen-bond strength using density functional theory. Although we agree with the conclusion that A:U is more strongly bound, we find no correlation between the hydrogen-bond strength and the NMR shielding of C2. Our study shows that NMR merely probes the presence/absence of the methyl group in thymine/uracil, without any relation to the strength of the hydrogen bonds involved. In other words, one cannot infer the Watson-Crick hydrogen-bond strength from the NMR shielding constant of adenine C2.     

The effect of the "inert" counteranions in the deprotonation of the dihydrogen complex trans-[FeH(eta 2-H2)(dppe)2]+: kinetic and theoretical studies

Kinetic studies indicate that trans-[FeH(H2)(dppe)2]+ reacts with an excess of NEt3 to form cis-[FeH2(dppe)2] in a single kinetic step. The second-order rate constant is strongly affected by the presence of added salts, an acceleration being observed with BF4- and PF6- salts and a deceleration with BPh4-. Theoretical calculations indicate that the role of the accelerating anions consists of the formation of ion pairs that provide a more effective reaction pathway for deprotonation. However, for the ion pair with the bulky BPh4- anion, steric crowding in the proximities of the dihydrogen ligand hinders the approach of the base, and the reaction is decelerated.