Diffusion coefficient measurement in a microfluidic analyzer using dual-beam microscale-refractive index gradient detection. Application to on-chip molecular size determination

We report a microchip-based detection scheme to determine the diffusion coefficient and molecular mass (to the extent correlated to molecular size) of analytes of interest. The device works by simultaneously measuring the refractive index gradient (RIG) between adjacent laminar flows at two different positions along a microchannel. The device, referred to as a microscale molecular mass sensor (micro-MMS), takes advantage of laminar flow conditions where the mixing of two streams occurs essentially by diffusion across the boundary between the two streams. Two flows merge on the microchip, one containing solvent only, referred to as the mobile phase stream and one which contains the analyte(s) of interest in the solvent, i.e. the sample stream. As these two streams merge and flow parallel to each other down the microchannel a RIG is created by the concentration gradient. The RIG is further influenced by analyte diffusion from the sample stream into the mobile phase stream. Measuring the RIG at a position close to the merging point (upstream signal) and simultaneously a selected distance further down the microchannel (downstream signal) provides real-time data related to the extent a given analyte has diffused, which can be readily correlated to analyte molecular mass by taking the ratio of the downstream-to-upstream signals. For the dual-beam RIG measurements, a diode laser output is coupled to a single mode fiber optic splitter with two output fibers. Light from each fiber passes through a graded refractive index (GRIN) lens forming a collimated beam that then passes through the microchannel and then on to a position sensitive detector (PSD). The RIG at both detection positions deflects the two collimated probe beams. The deflection angle of each beam is then measured on two separate PSDs. The micro-MMS was evaluated using polyethylene glycols (PEGs), sugars, and as a detector for size-exclusion chromatography (SEC). Peak purity can be readily identified using the micro-MMS with SEC. The limit of detection was 0.9 ppm (PEG at 11 840 g/mol) at the upstream detection position corresponding to a RI limit of detection (LOD) (3sigma) of 7-10(-8) RI. The pathlength for the RIG measurement was 200 microm and the angular LOD was 0.23 micro(rad) with a detection volume of 8 nl at both positions. The average molecular mass resolution was 9% (relative standard deviation) for a series of PEGs ranging in molecular mass from 106 to 22 800 g/mol. With this excellent mass resolution, small molecules such as monosaccharides, disaccharides, and so on, are readily distinguished. The sensor is demonstrated to readily determine unknown diffusion coefficients.     

Flow systems exploiting in-line prior assays

An expert sequential injection system involving a prior assay is proposed for spectrophotometric determination of phosphate and eventually zinc in soil extracts. The result of phosphate determination is the basis for a concentration-oriented decision regarding to the need or not for zinc determination. Zinc was only determined if a threshold value (peak height corresponding to 5.0 mg l⁻¹ P) was surpassed. The methods involved formation of molybdenum blue and the Rhodamine 6G/ammonium thiocyanate/Zn²⁺ ternary complex. Variations in the threshold value were < 2% during 4 h operating periods, false responses were not verified, and the analytical time was reduced in about 30%. Precise results (R.S.D. <3% P and < 1% Zn) in agreement with spectrophotometry and flame atomic absorption spectrometry were obtained. The innovation permits faster information processing, as well as a reduction in the number of measurements, number of analytical steps, laboratorial time, and consumption of sample and reagents, thus waste generation.     

Determination of N-nitrosamines by HPTLC with Fluorescence Detection — Use of Non-Ionic Surfactants as Enhancing Agents

JPC – Journal of Planar Chromatography – Modern TLC - The dansyl derivatives of N-nitrosodimethylamine, N-nitrosodi-ethylamine, and N-nitrosodibuthylamine have been separated by HPTLC...     

Diasterodivergent synthesis of optically pure vinyl episulfides and β-hydroxy thiocyanates from a bacterial metabolite

Diasterodivergent episulfides were chemoenzymatically derived from bromobenzene by sequential toluene dioxygenase dihydroxylation, followed by chemical epoxidation and thiolysis. The epoxide ring-opening by thiocyanate ion under literature conditions rendered the corresponding hydroxy thiocyanates and not the thiiranes as usually observed. Ring closing under carefully optimized conditions allowed the preparation of optically pure thiiranes that are key precursors for the preparation of thioconduritols and pseudodisaccharides.     

Oxobenzo[f]benzopyrans as new fluorescent photolabile protecting groups for the carboxylic function

The properties of three oxobenzo[f]benzopyrans as new fluorogenic photolabile protecting groups for the carboxylic function of amino acids were studied. Fluorescent amino acid conjugates were efficiently prepared and characterised. Photodeprotection of these compounds was carried out by irradiation at 300, 350 and 419 nm, the most suitable wavelength being 350 nm, on account of short irradiation times and good deprotection yields.     

Solution conformation of a nitrobenzoxadiazole derivative of the polyene antibiotic nystatin: a FRET study

Nystatin is a polyene antibiotic frequently applied in the treatment of topical fungal infections. In this work, a 7-nitrobenz-2-oxa-1,3-diazole (NBD) hexanoyl amide derivative of nystatin was synthesized and its detailed photophysical characterization is presented. The average conformation of the labelled antibiotic in tetrahydrofuran, ethanol and methanol was determined by intramolecular (tetraene to NBD) fluorescence resonance energy transfer measurements. At variance with the literature [Can. J. Chem. 63 (1985) 77-85], it was concluded that there is no need to invoke a solvent-dependent conformational equilibrium between extended and closed conformers of the antibiotic, because the mean tetraene-to-NBD separating distance was found to remain constant (approximately 18 A) in all the solvents studied. In addition, the large solvent dependence of the fluorescence anisotropy observed for the non-derivatized nystatin, was rationalized on the basis of the prolate ellipsoidal geometry of the molecule. It was concluded that the rod shaped and amphipathic antibiotic remains monomeric in different solvents within the concentration range studied (2-20 microM).     

Theoretical study of the electronic structure of CnS (n=1-6) thiocumulenes

Linear sulfur-carbon chains C(n)S (n=1-6) of astronomical interest were examined by means of several theoretical methods. The three smallest compounds of the series were chosen to evaluate the performance of several computational models, including Hartree-Fock theory, density functional theory with the Becke's three parameter exchange functional and the correlation functional of Lee, Yang, and Parr (B3LYP), and electron-correlated methods (second-order Moller-Plesset perturbation method (MP2), configuration interaction method including single and double excitations (CISD), and quadratic configuration interaction method including single and double excitations (QCISD) in combination with a large variety of basis sets. The systematic comparison between the experiment and theory indicates that the B3LYP/6-311G** method can be considered suitable for the study of the electronic structures of the C(n)S compounds. The electronic ground states of the C(n)S molecules alternate between 1Sigma and 3Sigma for odd and even values of n, respectively. The B3LYP/6-311G** wave functions for these electronic ground states were analyzed by means of the atoms in molecules (AIM) and natural bond orbital (NBO) methods. Both approaches suggest that the electronic structures for the singlet and triplet compounds must be considered separately. According to the NBO method, singlet compounds can be properly represented by acetylenic structures with alternating single and triple bonds (S[triple bond]C-C[triple bond]C...). However, triplet compounds are better described by means of double bond-double bond cumulenic structures (S=C=C=C=C...) as a consequence of the average between different alpha and beta electronic densities. AIM delocalization indexes and NBO interactions between localized orbitals also indicate that these structures are strongly pi delocalized. Finally, the different singlet and triplet structures proposed provide a consistent explanation for the geometries, dipole moments, and spin-density values of the C(n)S compounds studied.     

New macrocycles derived from biphenyl for pH-switched solvent extraction

Four new fluorescent macrocyclic ligands derived from biphenyl are described. The new compounds have been used in liquid-liquid extraction experiments and the influence of pH has been studied in those ligands containing carboxylic groups. The results obtained for the latter ligands have been compared with those observed in the presence of an external acid.