High-Performance Liquid Chromatographic Analysis of Amino Acids in Edible Seaweeds after Derivatization with Phenyl Isothiocyanate

Summary A reversed-phase high-performance liquid-chromatographic method has been used for analysis of the amino acids in edible seaweed. Sample proteins were hydrolysed with hydrochloric acid and the amino acids produced were derivatized with phenyl isothiocyanate. The resulting phenylthiocarbamyl amino acids were chromatographed on an ODS2 column with UV detection at 254 nm. The mobile phase was a mixture of 0.14 M ammonium acetate buffer, pH 6.4, containing 0.05% triethylamine (A) and 60:40 (v/v) acetonitrile–water (B), at a flow rate of 1.1 mL min^–1; the elution gradient (min:A%) was: 0:90, 8:90, 10:70, 12:70, 18:52, 20:0, 25:0, 28:90, 35:90. Method precision for the different amino acids was between 1.33 and 3.88% (relative standard deviation); detection limits were between 6.9 and 14.3 ng mL^–1. The amino acid content of the algae analysed ranged from 22.4 ± 1.9 to 138.0 ± 5.6 mg g^–1 d.w. The amino acids present at highest concentrations were glutamic acid, alanine, and phenylalanine.     

Flow injection spectrophotometric method for chloride determination in natural waters using Hg(SCN)(2) immobilized in epoxy resin

A flow injection (FI) spectrophotometric method was proposed for the determination of chloride ion in natural waters. The determination of chloride was carried out by reaction with Hg(SCN)₂ immobilized in an epoxy resin bead in a solid-phase reactor (SPR) and the thiocyanate ions released were determined spectrophotometrically at 480 nm after complexing reaction with Fe(III). The analytical curve for chloride was linear in the concentration range from 5.6 × 10⁻⁵ to 2.2 × 10⁻⁴ mol l⁻¹ with a detection limit of 1.4 × 10⁻⁵ mol l⁻¹. The relative standard deviation (R.S.D.) was 2.2% for a solution containing 2.2 × 10⁻⁴ mol l⁻¹ (n = 10). The simple manifold allows a routine analytical frequency of 100 determinations per hour. The main advantage of the developed method is the 400% reduction of the Hg waste solution generated when compared to conventional methods for chloride determination based on the same spectrophotometric reaction.     

Accelerating water exchange for GdIII chelates by steric compression around the water binding site

The water exchange process was accelerated for nine-coordinate, monohydrated macrocyclic GdIII complexes by inducing steric compression around the water binding site; the increased steric crowding was achieved by replacing an ethylene bridge of DOTA4- by a propylene bridge; in addition to the optimal water exchange rate, the stability of [Gd(TRITA)(H2O)]- is sufficiently high to ensure safe medical use which makes it a potential synthon for the development of high relaxivity, macromolecular MRI contrast agents.     

Preparation of candidate certified reference materials for the quality control of EDTA-and acetic acid-extractable trace metal determinations in sewage sludge-amended soil and terra rossa soil

The determination of extractable trace metal contents in soil using single extraction procedures is currently performed in many laboratories to assess the bioavailable metal fraction (and related phytotoxic effects) and the accessability to the environment (e.g. contamination of ground waters). Owing to the need for validation of the extraction schemes used and of the analytical techniques, the EC Measurements and Testing Programme (formerly BCR) has organized a project for improving the quality of determination of extractable trace metal contents in soil, the first step being an interlaboratory study to adopt common extraction procedures and the second being a certification campaign to certify two soils for their extractable trace element contents following these procedures. This paper gives a brief overview of the project organisation and describes the preparation, homogeneity and stability studies of two soil candidate reference materials (sewage sludge-amended and terra rossa soils).     

Diels-Alder reaction of fulvenes with N-(3,5-dichlorophenyl)-maleimide

Summary N-(3,5-Dichlorophenyl)-maleimide reacts smoothly with a variety of substituted fulvenes (1) to give onlyendo adducts (3) independent of the nature of fulvene substituent,Lewis acid catalyst, and reaction solvent and temperature. The structure of theDiels-Alder adduct3f was determined by X-ray crystallography. Semi-empirical quantum methods (AM1) were used to rationalize theendo stereoselectivity.Dedicated to Professor Fritz Sauter on the occasion of his 65^th birthday     

Kinetic study of zirconia crystallization from amorphous ZrO2-SiO2 composite precursors processed by sol-gel chemistry

Powder precursor gels with composition xZrO₂·(100–x)SiO₂, with selected values of x=8, 24, 43 and 75 mol%, were processed by sol-gel chemistry. Differential thermal analysis (DTA) was used to study crystallization in (cubic/tetragonal)-ZrO₂ during the heating of the reactive amorphous precursors. Kinetic parameters such as activation energy, Avrami's exponent and frequency factor have been simultaneously calculated from the computed DTA data using a previously reported kinetic model. The crystallization temperature decreases relative to the increase in the amount of ZrO₂, the value of the kinetic parameter of the crystallization being related to the value of x.     

Direct versus resonances mediated F+OH collisions on a new 3A" potential energy surface

A theoretical study of the F(2P) + OH(2Pi) --> HF(1Sigma+) + O(3P) reactive collisions is carried out on a new global potential energy surface (PES) of the ground 3A" adiabatic electronic state. The ab initio calculations are based on multireference configuration interaction calculations, using the aug-cc-pVTZ extended basis sets of Dunning et al. A functional representation of the PES shows no nominal barrier to reaction, contrary to previous results by others. Wave packet and quasiclassical trajectory calculations have been performed for this PES to study the F + OH(v = 0,j) reactive collision. The comparison was performed at fixed and constant values of the total angular momentum from 0 to 110 and relative translational energy up to 0.8 eV. The reaction presents a dynamical barrier, essentially due to the zero-point energy for the bending vibration near the saddle point. This determines two different reaction mechanisms. At energies higher than approximately 0.125 eV the reaction is direct, while below that value it is indirect and mediated by heavy-light-heavy resonances. Such resonances, also found in the simulations of the photodetachment spectrum of the triatomic anion, manifest themselves in the quasiclassical simulations, too, where they are associated to periodic orbits.     

Conjugate acid structure for oxaziridines bearing primary and secondary 2-alky 1 groups

The protonation of five representative oxaziridines is reported for inert solvents (deuterio-chloroform or carbon tetrachloride) where conjugate acid formation may be effected by the addition of about 20% (v/v) TFA. Comparison of the ¹H nmr chemical shifts for neutral and conjugate acid forms suggests that oxaziridines usually undergo protonation on the N-atom under these conditions. For one compound studied, 2-ethyl-3-p-nitrophenyloxaziridine, there is a possibility that protonation occurs on the alternative O-atom. The relevance of these findings to the mechanism of the acid-catalysed hydrolysis of oxaziridines is discussed.     

Flow injection determination of bismuth in urine by successive retention of Bi(III) and tetrahydroborate(III) on an anion-exchange resin and hydride generation atomic absorption spectrometry

Bismuth as BiCl₄⁻ and BH₄⁻ ware successively retained in a column (150 mm × 4 mm, length × i.d.) packed with Amberlite IRA-410 (strong anion-exchange resin). This was followed by passage of an injected slug of hydrochloric acid resulting in bismuthine generation (BiH₃). BiH₃ was stripped from the eluent solution by the addition of a nitrogen flow and the bulk phases were separated in a gas–liquid separator. Finally, bismutine was atomized in a quartz tube for the subsequent detection of bismuth by atomic absorption spectrometry. Different halide complexes of bismuth (namely, BiBr₄⁻, BiI₄⁻ and BiCl₄⁻) were tested for its pre-concentration, being the chloride complexes which produced the best results. Therefore, a concentration of 0.3 mol l⁻¹ of HCl was added to the samples and calibration solutions. A linear response was obtained between the detection limit (3σ) of 0.225 and 80 μg l⁻¹. The R.S.D.% (n = 10) for a solution containing 50 μg l⁻¹ of Bi was 0.85%. The tolerance of the system to interferences was evaluated by investigating the effect of the following ions: Cu²⁺, Co²⁺, Ni²⁺, Fe³⁺, Cd²⁺, Pb²⁺, Hg²⁺, Zn²⁺, and Mg²⁺. The most severe depression was caused by Hg²⁺, which at 60 mg l⁻¹ caused a 5% depression on the signal. For the other cations, concentrations between 1000 and 10,000 mg l⁻¹ could be tolerated. The system was applied to the determination of Bi in urine of patients under therapy with bismuth subcitrate. The recovery of spikes of 5 and 50 μg l⁻¹ of Bi added to the samples prior to digestion with HNO₃ and H₂O₂ was in satisfactory ranges from 95.0 to 101.0%. The concentrations of bismuth found in six selected samples using this procedure were in good agreement with those obtained by an alternative technique (ETAAS). Finally, the concentration of Bi determined in urine before and after 3 days of treatment were 1.94 ± 1.26 and 9.02 ± 5.82 μg l⁻¹, respectively.     

Analysis of mono- and disaccharides in milk-based formulae by high-performance liquid chromatography with refractive index detection

A simple and reproducible method for the qualitative and quantitative analysis of free mono- and disaccharides (fructose, glucose, galactose, sucrose, lactulose and lactose) in milk-based formulae by high-performance liquid chromatography (HPLC) with refractive index (RI) detection was developed and validated. The method showed good linearity with determination coefficients exceeding 0.99. The limits of detection (DL) in these sugars were 0.17, 0.13, 0.06, 0.16, 0.05 and 0.25 mg/ml, respectively; and the limits of quantification (QL), 0.27, 0.24, 0.20, 0.26, 0.22 and 0.38 mg/ml. The relative standard deviations (R.S.D.s) for repeatability in fructose, sucrose, lactulose and lactose were 0.78, 0.99, 2.91 and 0.46 and the R.S.D.s for reproducibility were 4.8, 6.15, 7.04 and 2.49, respectively. Recoveries in all sugars were between 93 and 113%.