Microdetermination of phosphate with EDTA

An indirect microdetermination of phosphate via EDTA titration is described, which can be applied to minerals, soils, fertilizers, biological samples, drugs and organo-phosphorus compounds. The method is based on the precipitation of phosphate as the very insoluble silver orthophosphate (K_sp = 1.3 × 10^?20), dissolution of this precipitate in a solution of potassium cyanonickelate and titration of the nickel displaced by silver. The phosphate content is obtained indirectly by multiplying the number of ml of the titrant by a factor. The method takes about an hour after the phosphate is brought into solution. The accuracy is about 1% for samples containing 5–50 mg PO₄^3? and about 3–5% for samples with 100 to 5000 μg PO₄^3?.     

Identifying acetylated lignin units in non-wood fibers using pyrolysis-gas chromatography/mass spectrometry

A series of non-wood plant fibers, namely kenaf, jute, sisal and abaca, have been analyzed upon pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) of the whole material. The pyrolysis products mainly arise from the carbohydrate and lignin moieties of the fibers. The lignin-derived phenols belonged to the p-hydroxyphenylpropanoid (H), guaiacylpropanoid (G) and syringylpropanoid (S) structures, and showed a high S/G ratio of between 2.0 and 5.4, the highest corresponding to kenaf. Among the lignin-derived phenols released, small amounts of sinapyl and coniferyl acetates (in both cis- and trans-forms) were identified for the first time upon Py-GC/MS of lignocellulosic materials. Acetylation of the sinapyl and coniferyl alcohols was at the gamma-position of the side chain. The release of these alcohols derived from intact acetylated lignin units upon pyrolysis seems to indicate that the native lignin in the fibers selected for this study is at least partially acetylated. Sinapyl (and coniferyl) acetates have recently been suggested to be authentic lignin precursors involved in the polymerization of lignin along with the normal sinapyl and coniferyl alcohols. Py-GC/MS will offer a convenient and rapid tool for analyzing naturally acetylated lignins, as well as to screen plant materials for the presence of acetylated units in lignin.     

Synthesis and antitumor activity of DNA binding cationic porphyrin-platinum(II) complexes

A new series of DNA binding 5,10,15-tri(N-methyl-4-pyridiniumyl)porphyrin (TrisMPyP)-platinum(II) conjugates was synthesized, in which different spacer ligands were used for appropriate coordination to platinum(II) complexes. Compound 9b exhibited in vivo antitumor activity (T/C%, 294) superior to cisplatin (T/C%, 184) against the leukemia L1210 cell line.     

Reduction of sulfoxides with boranes catalyzed by MoO2Cl2

The first example of an organic reduction with boranes catalyzed by a high valent oxo-complex is reported. The systems catecholborane/MoO₂Cl₂(H₂O)₂ (5 mol %) and BH₃·THF/MoO₂Cl₂ (5 mol %) proved to be very efficient for the reduction of sulfoxides to the corresponding sulfides in excellent yields.     

Di­chloro­bis(1‐propyl­imidazolidine‐2‐thione‐κS)­cobalt(II)

The crystal structure of the title compound, [CoCl₂(C₆H₁₂N₂S)₂], consists of monomer units of a Co^II atom coordinated to two 1‐propyl­imidazolidine‐2‐thione ligands and to two chloride ions. The heterocyclic thione ligand is monodentate and coordinated to the metal through the thione S atom. The environment around the Co^II atom is a slightly distorted tetrahedron. The Co—S bond lengths are 2.341 (2) and 2.330 (2) Å, and the Co—Cl bond lengths are 2.234 (2) and 2.238 (2) Å. The most important point of distortion is the S—Co—S bond angle of only 97.83 (8)°. Intramolecular classical hydrogen bonds are found between the chloride ions and the N—H groups. Additionally, intra‐ and intermolecular non‐classical hydrogen bonds are found.     

Flow injection system for hydrolysable tannin determination

A flow injection system was proposed to evaluate the transient product of a colorimetric reaction between hydrolysable tannin and potassium iodate (KIO₃) solution. The system optimization was accomplished by using statistical methods based on experimental design. Flow rate of KIO₃ solution, sample volume, carrier flow rate, and reaction coil were the selected factors for evaluation. On screening step, complete factorial 2⁴ was used and two levels for each selected factor were studied. For the optimization phase, a centered face composite design 2² + star was employed to evaluate sample volume and flow rate of KIO₃ solution, which were the factors identified in the screening phase as having more influence on the absorbance signal. After optimization, the proposed system was compared with batch determination. Some characteristics, such as analytical frequency, reagent consumption and chemical residues generation presented better results by the use of the proposed system if compared with batch method. The system presented good repeatability with standard deviation lower than 3%, for n = 10, linearity (R² = 0.9974) for tannic acid standard, analytical frequency of 15 injections h^− 1 and limit of quantification of 24 mg L^− 1 of tannic acid. Good results were obtained when the proposed system was applied to hydrolysable tannin determination in Stryphnodendron barbatimão, Eucalyptus citriodora and Phyllanthus niruri, samples of plants commonly used in popular medicine.     

Molybdenum(VI)-complexes with chiral N,O-ligands derived from carbohydrates: synthesis, structure and catalytic properties in asymmetric olefin epoxidation

Novel chiral 2′-pyridinyl alcohols derived from isopropylidene-protected carbohydrates are reported. They show different characteristics at the hydroxy group, but are all suitable ligands for chiral molybdenum(VI) complexes of the type MoO₂L₂ (L = chiral 2′-pyridinyl alcoholate). MoO₂(acac)₂ served as starting material in the complex syntheses. The structure of one ligand and one dioxo complex were exemplary established by X-ray crystallography. For catalytic runs in the enantioselective epoxidation catalysis trans-methylstyrene was used as model substrate, tert-butylhydroperoxide and cumolhydroperoxide, resp., as the oxidant.     

Transition metal complexes with thiosemicarbazide-based ligands,IV: Synthesis and molecular structure of 5-nitrosalicylaldehyde S-methylisothiosemicarbazonato-piperidine-copper(II)

Summary The reaction of warmDMF solutions of Cu(II) perchlorate, 5-nitrosalicylaldehyde S-methylisothiosemicarbazone (H₂ L) and piperidine (Pip) yielded the paramagnetic (_eff=2.19 B.M.) Cu(L)Pip complex, whereL is the dianionic form of H₂ L, formed as a result of deprotonation of the phenolic hydroxyl and NH₂ group. Crystal data of the complex are: monoclinic P2₁,a=11.902(4),b=6.765(3),c=11.343(4)Å; =112.92°,V=841.20(8)ų,M=400.9,Z=2,d ₀=1.60 gcm^–3,d _c =1.58 gcm^–3,F(000)=424. The structure was refined to a residualR=0.047. The copper(II) ion is coordinated in a square-planar arrangement by the piperidine nitrogen and the NNO set of donor atoms ofL.

---

Komplexe der Übergangsmetalle mit Thiosemicarbazid-Liganden, IV. Synthese und molekulare Struktur von 5-Nitrosalicylaldehyd-S-methylisothiosemicarbazonato-piperidin-kupfer(II)

Zusammenfassung Durch die Reaktion in warmenDMF-Lösungen von Cu(II) Perchlorat, 5-Nitrosalicylaldehyd-S-methylisothiosemicarbazon (H₂ L) und Piperidin (Pip) wurde ein paramagnetischer Komplex (_eff=2.19 B.M.) Cu(L)Pip erhalten, wobeiL nach doppelter Deprotonierung (NH₂- und Phenolhydroxyl-Gruppe) als dianionische Form von H₂ L vorliegt. Die kristallographischen Daten des Komplexes sind: monokline Raumgruppe P2₁,a=11.902(4),b=6.765(3),c=11.343(4)Å, =112.92°;V=841.20ų,M=400.9,Z=2,d ₀=1.60 gcm^–3,d _c =1.58 gcm^–3,F(000)=424. Die struktur wurde bis zu einemR-Wert von 0.047 verfeinert. Die Koordination des Kupfers wird quadratisch-planar über den Piperidin-Stickstoff und die NNO-Donorhülle der Chelatliganden gebildet.

     

On the magnetism of a so-called one-dimensional crystal,dimethylammonium trichlorocuprate(II), DMACuCl3

Magnetic anisotropy and susceptibility of a so-called one-dimensional crystal, dimethylammonium trichlorocuprate(II), DMACuCl₃, measured between 300 and 77 K can be explained on the basis of a Cu²⁺ ion in a large tetragonal crystal field, although the shortest Cu-Cu distance is 3.443 Å. Measurements of anisotropic susceptibilities below 77 K are needed to ascertain the real magnetic behaviour in this system.