Glass transitions and mixed phases in block SBS

Differential scanning calorimetry (DSC) does not allow for easy determination of the glass‐transition temperature (T_g) of the polystyrene (PS) block in styrene–butadiene–styrene (SBS) block copolymers. Modulated DSC (MDSC), which deconvolutes the standard DSC signal into reversing and nonreversing signals, was used to determine the (T_g) of both the polybutadiene (PB) and PS blocks in SBS. The T_g of the PB block was sharp, at ?92 °C, but that for the PS blocks was extremely broad, from ?60 to 125 °C with a maximum at 68 °C because of blending with PB. PS blocks were found only to exist in a mixed PS–PB phase. This concurred with the results from dynamic mechanical analysis. Annealing did not allow for a segregation of the PS blocks into a pure phase, but allowed for the segregation of the mixed phase into two mixed phases, one that was PB‐rich and the other that was PS‐rich. It is concluded that three phases coexist in SBS: PB, PB‐rich, and PS‐rich phases. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 276–279, 2005     

Carboxylic fused furans for amino acid fluorescent labelling

Four carboxylic fused furans are presented as new fluorescent labels for the amino and hydroxyl functions of organic molecules. Various representative l-amino acids were chosen as models, labelled at their N-terminus and also at their side-chain. Fluorescent derivatives were obtained in high yields, and their absorption and emission properties were studied.     

Ab initio modelling of crosslinking in polymers. A case of chains with furan rings

A quantum chemical model (Abinitio HF-MO and DFT-B3LYP) of polyfurfuryl alcohol crosslinking is shown. Two pathways were considered: (a) a Diels–Alder (D–A) reaction between a dihydrofuran moiety and a furan ring; (b) the addition reaction of electrophilic specimens on conjugated double bonds. The ability for the formation of D–A adducts (dienes and dienophiles) was investigated by the frontier molecular orbital (FMO) theory. Energy gaps between the FMO's of diene and dienophile structures suggest that the occurrence of the D–A reaction is possible. The results suggest that the carbons of the exo double bonds attached to dihydrofuran rings are the sites most likely to be attacked by electrophilic species, while the C₃ and C₄ atoms display the opposite tendency due to their low HOMO electron densities. Results of a thermochemical approach to these reactions at the MP2 level was in agreement with reactivity modelled by MO predictions.     

The first total synthesis of (R)-convolutamydine A

The first total synthesis of (R)-convolutamydine A has been achieved by the organocatalytic addition of acetone to 4,6-dibromoisatin. The absolute configuration was determined by single crystal X-ray diffraction. DFT studies were used to model the transition states for the aldol reaction and equilibrium geometries of the post-aldol reaction intermediates. The DFT study revealed that the aldol bond forming reaction was considerably endothermic.     

Tests of ordered hypotheses in linkage in heredity

The asymptotic null distribution of the likelihood ratio test for two cases of ordered hypotheses in a particular genetic model is considered. A simple iterative process is proposed in order to get the restricted estimates. It is shown that both tests have asymptotically a chi-bar squared distribution and the same size. A simulation study is also conducted in order to compare the usual unrestricted test with the corresponding one of ordered hypotheses. Finally, the results are extended to some special cases.     

Bending loss measurement using a fiber cavity ringdown scheme

A novel sensitive technique for the determination of losses in fiber cavities is presented. The method is based on the cavity ringdown scheme implemented in silica-based single-mode fibers. Bending losses of fiber cavities of different lengths have been measured showing all an oscillating behavior with respect to the curvature radius of the fiber as predicted by a theoretical model. The best minimum detectable absorbance per cavity pass achieved by this new method is 1.72×10⁻³ dB within a 10 m-long cavity. This limit suffices well for an accurate determination of optical bending losses even in bend-insensitive fibers. Furthermore, the comparison of the measured bending losses with a theoretical model allows the extraction of different fiber parameters. Good agreement has been found between the experimentally derived parameters and literature data.     

Large-scale production of cellulose-binding domains. Adsorption studies using CBD-FITC conjugates

A method for the gram-scale production of cellulose-binding domains (CBD) through the proteolytic digestion of a commercial enzymatic preparation (Celluclast) was developed. The CBD obtained, isolated from Trichoderma reesei cellobiohydrolase I, is highly pure and heavily glycosylated. The purified peptide has a molecular weight of 8.43 kDa, comprising the binding module, a part of the linker, and about 30% glycosidic moiety. Its properties may thus be different from recombinant ones expressed in bacteria. CBD-fluorescein isothiocyanate conjugates were used to study the CBD-cellulose interaction. The presence of fluorescent peptides adsorbed on crystalline and amorphous cellulose fibers suggests that amorphous regions have a higher concentration of binding sites. The adsorption is reversible, but desorption is a very slow process.     

Lightly crosslinked,mesomorphic networks obtained through the reaction of dimeric,liquid‐crystalline epoxy–imine monomers and heptanedioic acid

We reacted various dimeric, liquid‐crystalline epoxy–imine monomers, differing in the length of the central aliphatic spacer or the dipolar moments, with heptanedioic acid. The resulting systems showed a liquid‐crystalline phase in some cases, depending on the dimer and on the reaction conditions. The systems were characterized with respect to their mesomorphic properties and then were submitted to dynamic mechanical thermal analysis in both fixed‐frequency and frequency‐sweep modes in the shear sandwich configuration. The arrangement in the liquid‐crystalline phase seemed to be mainly affected both by the polarization of the mesogen and by the reaction temperature, which favored the liquid‐crystalline arrangement when it was lying in the range of stability of the dimer mesophase. In agreement with other recent literature data, dynamic mechanical thermal analysis results suggested that the presence of the mesogen directly incorporated into the main chain increased the lifetimes of the elastic modes both in the isotropic phase and in the liquid‐crystalline phase with respect to side‐chain liquid‐crystalline elastomers and that the time–temperature superposition principle did not hold through the liquid‐crystalline‐to‐isotropic transition. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44:6270–6286, 2006