Improvement in steroid screening for doping control with special emphasis on stanozolol

The Medical Commission of the International Olympic Committee forbids the use of anabolic androgenic steroids and beta2-agonists to improve athletic performance. In this work we have selected examples of anabolic androgenic compounds and their metabolites to evaluate the GC-MS analysis of some trimethylsilyl derivatives. The aim is to set the best GC conditions to improve the detection within the whole range of analyte elution temperatures. The initial column temperature was changed to 105 or 140 degrees C followed by 40 degrees C min(-1) to 200 degrees C and then 15 degrees C min(-1) to 300 degrees C. Using 140 degrees C as the initial oven temperature it was possible to obtain narrower initial analyte distributions for the compounds that elutes at the beginning of the chromatogram as clenbuterol, mabuterol, epimethylenediol and norandrosterone, without loss of derivatized metabolites signal. Later. eluting analytes, such as the stanozolol metabolites, furazabol and oxandrolone were not affected. Temperatures below 140 degrees C. resulted in partial derivatization for some analytes mainly stanozolol related structures. Therefore evaluation of derivatization conditions as occurring in three steps, the vial, vaporization chamber and capillary column, was thoroughly assessed. The new program temperature improves the signal-to-noise ratio for some compounds and shows adequate resolution for endogenous compounds. Some of the difficult key separations necessary for doping control enforcement were also obtained with the proposed method.     

Transition metal complexes with thiosemicarbazide-based ligands,IV: Synthesis and molecular structure of 5-nitrosalicylaldehyde S-methylisothiosemicarbazonato-piperidine-copper(II)

Summary The reaction of warmDMF solutions of Cu(II) perchlorate, 5-nitrosalicylaldehyde S-methylisothiosemicarbazone (H₂ L) and piperidine (Pip) yielded the paramagnetic (_eff=2.19 B.M.) Cu(L)Pip complex, whereL is the dianionic form of H₂ L, formed as a result of deprotonation of the phenolic hydroxyl and NH₂ group. Crystal data of the complex are: monoclinic P2₁,a=11.902(4),b=6.765(3),c=11.343(4)Å; =112.92°,V=841.20(8)ų,M=400.9,Z=2,d ₀=1.60 gcm^–3,d _c =1.58 gcm^–3,F(000)=424. The structure was refined to a residualR=0.047. The copper(II) ion is coordinated in a square-planar arrangement by the piperidine nitrogen and the NNO set of donor atoms ofL.

---

Komplexe der Übergangsmetalle mit Thiosemicarbazid-Liganden, IV. Synthese und molekulare Struktur von 5-Nitrosalicylaldehyd-S-methylisothiosemicarbazonato-piperidin-kupfer(II)

Zusammenfassung Durch die Reaktion in warmenDMF-Lösungen von Cu(II) Perchlorat, 5-Nitrosalicylaldehyd-S-methylisothiosemicarbazon (H₂ L) und Piperidin (Pip) wurde ein paramagnetischer Komplex (_eff=2.19 B.M.) Cu(L)Pip erhalten, wobeiL nach doppelter Deprotonierung (NH₂- und Phenolhydroxyl-Gruppe) als dianionische Form von H₂ L vorliegt. Die kristallographischen Daten des Komplexes sind: monokline Raumgruppe P2₁,a=11.902(4),b=6.765(3),c=11.343(4)Å, =112.92°;V=841.20ų,M=400.9,Z=2,d ₀=1.60 gcm^–3,d _c =1.58 gcm^–3,F(000)=424. Die struktur wurde bis zu einemR-Wert von 0.047 verfeinert. Die Koordination des Kupfers wird quadratisch-planar über den Piperidin-Stickstoff und die NNO-Donorhülle der Chelatliganden gebildet.

     

Determination of oxidized and reduced glutathione, by capillary zone electrophoresis, in Brassica juncea plants treated with copper and cadmium

A rapid method of capillary zone electrophoresis is described to determine the oxidized (GSSG) and reduced (GSH) form of glutathione in plant tissue. In order to separate both analytes in a fused-silica capillary, the pH and composition of the electrolyte solution were optimized. The electrolyte composition was 100 mmol/L, borate 25 mmol/L Tris, and 0.2% w/v metaphosphoric acid (MPA), pH 8.2. Some instrumental conditions used to run the samples were hydrostatic injection for 30 s, 30 kV applied voltage, and UV detection (185 nm) at 25 degrees C. Linearity and useful range obtained for the calibration curves were optimum, with correlation coefficients about 0.999 in the 0-120 micromol/L range. The migration time was highly reproducible, less than 5 min being afforded to run a sample. Electrolyte buffer and samples required a careful pH control for optimal separation of both analytes. This aspect constitutes a critical analytical step when acids are used in the procedure for sample preparation. Simultaneous analysis of GSH and GSSG may provide a useful tool for comparative studies of plants in order to select those species with a potential capacity for detoxification from toxic elements or those appearing promising from phytoremediation for these elements.     

Molybdenum-phosphorus triple bond stabilization by ancillary alkoxide ligation: synthesis and structure of a terminal phosphide tris-1-methylcyclohexanoxide complex

Using alcoholysis, we converted terminal phosphide PMo(N[i-Pr]Ar)3 into a new, monomeric terminal phosphide PMo(OR)3, where R = 1-methylcyclohexyl or 1-adamantyl. Dimerization of the PMo unit was observed upon alcoholysis with 2,6-dimethylphenol, and the dimer [PMo(N[i-Pr]Ar)(O-2,6-C6H3Me2)2]2 was isolated and characterized by X-ray crystallography.     

NADH Electrooxidation Using Bis(1,10-phenanthroline-5,6-dione) (2,2'-bipyridine)ruthenium(II)-Exchanged Zirconium Phosphate Modified Carbon Paste Electrodes

We present a carbon paste electrode (CPE) modified using the electron mediator bis(1,10‐phenanthroline‐5,6‐dione)(2,2′‐bipyridine)ruthenium(II) ([Ru(phend)₂bpy]²⁺) exchanged into the inorganic layered material zirconium phosphate (ZrP). X‐Ray powder diffraction showed that the interlayer distance of ZrP increases upon [Ru(phend)₂bpy]²⁺ intercalation from 10.3 Å to 14.2 Å. The UV‐vis and IR spectroscopies results showed the characteristic peaks expected for [Ru(phend)₂bpy]²⁺. The UV‐vis spectrophotometric results indicate that the [Ru(phend)₂bpy]²⁺ concentration inside the ZrP layers increased as a function of the loading level. The exchanged [Ru(phend)₂bpy]²⁺ exhibited luminescence even at low concentration. Modified CPEs were constructed and analyzed using cyclic voltammetry. The intercalated mediator remained electroactive within the layers (E°′=–38.5 mV vs. Ag/AgCl, 3.5 M NaCl) and electrocatalysis of NADH oxidation was observed. The kinetics of the modified CPE shows a Michaelis–Menten behavior. This CPE was used for the oxidation of NADH in the presence of Bakers' yeast alcohol dehydrogenase. A calibration plot for ethanol is presented.     

Indium(I) bromide-mediated coupling of dibromoacetonitrile with aldehydes followed by Boord elimination of bromine and oxygen of β-bromo alkoxides for preparation of 3-organyl-2-alkenenitriles

The organoindium compound derived from indium monobromide and dibromoacetonitrile reacts with carbonyl compounds to afford the corresponding 2-bromo-2-cyano-indium(III) alkoxide. The action of a second equivalent of indium monobromide onto the alkoxides derived from aldehydes promotes the Boord elimination of the β-related oxygen and bromine atoms leading to 2-alkenenitriles.     

The effect of composition of parenteral solution on the thermal resistance of Bacillus stearothermophilus and Bacillus subtilis spores

Large-volume parenteral solutions were submitted to heat treatments after being inoculated with Bacillus stearothermophilus ATCC 7953 (T _r =121°C) and Bacillus subtilis ATCC 9372 (T _r =104.5°C) spores. The average decimal reduction time for B. stearothermophilus ranged from a D _121°C value of 1.31 to 3.14 min, in glucophysiologic and Ringer’s solutions respectively. For B. subtilis, D _104.5°C value increased from 0.69 to 1.37 min, in Ringer’s (pH=5.91) and 50% glucose (pH 3.05) solutions respectively. The z value ranged from 7.95°C (20% mannitol solution) to 13.14°C (50% glucose solution), corresponding to an activation energy (Ea) of 81.48 and 49.30 kcal/mol, respectively.     

Hair color changes and protein damage caused by ultraviolet radiation

Ultraviolet and visible radiations are known to damage hair. However, quantitative data relating damage to hair type, proteins and color to the radiation wavelength are missing. We studied the effect of UV plus visible, UVA plus visible, visible mercury-vapor lamp radiation and sunlight on (blended) virgin dark-brown, blond and red hair and (one head) virgin black and curly dark-brown hair. All hair types showed a substantial increase in protein loss in water after lamp and sun irradiation. The damaging effect of UVB was about 2-5 times higher than that of UVA plus visible radiation, depending on the hair type. Significant color changes were also observed in every hair type, after lamp and sun irradiation, being more pronounced for the light colored hairs. The luminosity difference parameter was the major contributor to the hair color changes, but significant changes in the red-green and yellow-blue parameters of every hair were observed. In this case, the damaging effect is ascribable mainly to UVA radiation. No significant changes in the mechanical properties or topography were observed in any case. We discuss these results in terms of hair type and composition and melanin types.     

Optimization model to support sustainable crop planning for reducing unfairness among farmers

Central European Journal of Operations Research - Agri-food production must increase while food waste needs to be reduced for improving the position of farmers. To do so it is necessary to...