Mössbauer investigation of the photoexcited spin states and crystal structure analysis of the spin-crossover dinuclear complex [{Fe(bt)(NCS)(2)}(2)bpym] (bt=2,2'-bithiazoline, bpym=2,2'-bipyrimidine)

The crystal structure of the complex [{Fe(bt)(NCS)(2)}(2)bpym] (1) (bt=2,2'-bithiazoline, bpym=2,2'-bipyrimidine) has been solved at 293, 240, 175 and 30 K. At all four temperatures the crystal remains in the P space group with a=8.7601(17), b=9.450(2), c=12.089(3) A, alpha=72.77(2), beta=79.150(19), gamma=66.392(18) degrees , V=873.1(4) Angstrom(3) (data for 293 K structure). The structure consists of centrosymmetric dinuclear units in which each iron(II) atom is coordinated by two NCS(-) ions in the cis position and two nitrogen atoms of the bridging bpym ligand, with the remaining positions occupied by the peripheral bt ligand. The iron atom is in a severely distorted octahedral FeN(6) environment. The average Fe--N bond length of 2.15(9) Angstrom indicates that compound 1 is in the high-spin state (HS-HS) at 293 K. Crystal structure determinations at 240, 175 and 30 K gave a cell comparable to that seen at 293 K, but reduced in volume. At 30 K, the average Fe--N distance is 1.958(4) Angstrom, showing that the structure is clearly low spin (LS-LS). At 175 K the average Fe--N bond length of 2.052(11) Angstrom suggests that there is an intermediate phase. M?ssbauer investigations of the light-induced excited spin state trapping (LIESST) effect (lambda=514 nm, 25 mW cm(-2)) in 1 (4.2 K, H(ext)=50 kOe) show that the excited spin states correspond to the HS-HS and HS-LS pairs. The dynamics of the relaxation of the photoexcited states studied at 4.2 K and H(ext)=50 kOe demonstrate that HS-HS pairs revert with time to both HS-LS and LS-LS configurations. The HS-LS photoexcited pairs relax with time back to the ground LS-LS configuration. Complex [{Fe(0.15)Zn(0.85)(bt)(NCS)(2)}(2)bpym] (2) exhibits a continuous spin transition centred around 158 K in contrast to the two-step transition observed for 1. The different spin-crossover behaviour observed for 2 is due to the decrease of cooperativity (intermolecular interactions) imposed by the matrix of Zn(II) ions. This clearly demonstrates the role of the intermolecular interactions in the stabilization of the HS-LS intermediate state in 1.     

Determination of the herbicide metribuzin and its major conversion products in soil by micellar electrokinetic chromatography

In this paper, a multiresidue method for the analysis in soils of metribuzin (M) and its major conversion products, deaminometribuzin (DA), diketometribuzin (DK) and deaminodiketometribuzin (DADK) is developed. Considering the neutral and charged nature of the molecules, micellar electrokinetic chromatography (MEKC) is a very efficient method for the separation of these compounds, providing high efficiency and short analysis times. Different electrophoretic parameters were studied to optimize the separation, such as the buffer pH and concentration, sodium dodecyl sulphate (SDS) concentration, injection conditions and applied voltage. Excellent separation of the studied compounds was achieved within about 7 min. Soil samples were previously extracted using methanol in an ultrasonic bath and then a SPE procedure was applied to pre-concentrate the analytes by passage through a LiChrolut EN sorbent column. Detection limits at the low microgkg(-1) level were obtained. The proposed method has been satisfactorily applied in soil samples showing recoveries ranging from 86.7% to 104.2% and represents a valuable alternative to high-performance liquid chromatography (HPLC).     

Assembly of a model hydrophobic drug into cationic bilayer fragments

Catanionic surfactants result from the pairing of oppositely charged amphiphilic molecules, forming a new class of surfactant molecules with various interesting lyotropic and thermotropic properties. With the aim of probing the role of both headgroup chemical nature/structure and molecular shape, a series of catanionic surfactants were synthesized. The cationic portion of the molecule is kept constant, being the dioctadecyldimethylammonium double chain. Different single-chained surfactants with varying headgroups and chain lengths are used as the anionic pair. The thermotropic behavior has been studied by DSC and the mesophase structural investigated by polarized light microscopy. The results indicate that, for a given chain length, parameters such as headgroup polarity and charge density, as well as volume, influence the catanionic surfactant behavior. The thermodynamic parameters are qualitatively evaluated, considering the headgroup chemical nature and the overall molecular structure.     

Eu(III) and Tb(III) luminescence sensitized by thiophenyl-derivatized nitrobenzoato antennas

Thiophenyl-derivatized nitrobenzoic acid ligands have been evaluated as possible sensitizers of Eu(III) and Tb(III) luminescence. The resulting solution and solid-state species were isolated and characterized by luminescence spectroscopy and X-ray crystallography. The Eu(III) complex with 2-nitro-3-thiophen-3-yl-benzoic acid, 1, crystallizes in the monoclinic space group C2/c with a = 28.569(3) A, b = 17.7726(18) A, c = 17.7073(18) A, beta= 126.849(2) degrees, and V = 7194.6(13) A3. The Tb(III) complex with this ligand, 2, is isostructural, and its cell parameters are a = 29.755(6) A, b = 18.123(4) A, c = 19.519(4) A, beta= 130.35(3) degrees, and V = 8021(3) A3. Eu(III) crystallizes with 3-nitro-2-thiophen-3-yl-benzoic acid as a triclinic complex, 3, in the space group P1 with a = 11.045(2) A, b = 12.547(3) A, c = 15.500(3) A, alpha = 109.06(3)degrees, beta = 94.79(3) degrees, gamma = 107.72(3) degrees. and V = 1893.5(7) A3. With the ligand 5-nitro-2-thiophen-3-yl-benzoic acid, Eu(III) yields another molecular compound, 4, triclinic P1, with a = 10.649(2) A, b = 14.009(3) A, c = 15.205(3) A, alpha= 112.15(3) degrees, beta = 100.25(3) degrees, gamma = 106.96(3) degrees, and V = 1900.5(7) A3. All compounds dissolve in water and methanol, and the methanolic solutions are luminescent. The solution species have a metal ion-to-ligand ratio of 1:1. The quantum yields have been determined to be in the range of 0.9-3.1% for Eu(III) and 4.7-9.8% for Tb(III). The highest values of these correspond to the most intense luminescence reported for Ln(III) solutions with this type of sensitizer. The lifetimes of luminescence are in the range of 248.3-338.9 micros for Eu(III) and 208.6-724.9 micros for Tb(III). The stability constants are in the range of log 11 = 2.73-4.30 for Eu(III) and 3.34-4.18 for Tb(III) and, along with the energy migration pathways, are responsible for the reported efficiency of sensitization.     

Study of phytochelatins and other related thiols as complexing biomolecules of As and Cd in wild type and genetically modified Brassica juncea plants

The accumulation of As and Cd in Brassica juncea plants and the formation of complexes of these elements with bioligands such as glutathione and/or phytochelatins (PCs) is studied. The genetic manipulation of these plants to induce higher As and Cd accumulation has been achieved by overexpressing the genes encoding for gamma-glutamyl cysteine synthetase (gamma-ECS) and glutathione synthetase (GS). These two enzymes are responsible for glutathione (GSH) formation in plants, which is the first step in the production of PCs. The biomass produced in both the wild type and the genetically modified plants, has been evaluated. Additionally, the total Cd and As concentration accumulated in the plant tissues was measured by inductively coupled plasma mass spectrometry (ICP-MS) after extraction. Speciation studies on the extracts were conducted using size exclusion liquid chromatography (SEC) coupled online with ICP-MS to monitor As, Cd and S. For further purification of the As fractions, reversed phase high performance liquid chromatography (RP-HPLC) was used. Structural elucidation of the PCs and other thiols, as well as their complexes with As and Cd, was performed by electrospray-quadrupole-time-of-flight (ESI-Q-TOF). In both the Cd and As exposed plants it was possible to observe the presence of oxidized PC2 ([M + H]+, m/z 538), GS-PC2(-Glu) ([M + H]+, m/z 716) as well as reduced GSH ([M + H]+, m/z 308) and oxidized glutathione (GSSG) ([M + H]+, m/z 613). However, only the GS plants exhibited the presence of As(GS)3 complex ([M + H]+, m/z 994) that was further confirmed by MS/MS. This species is reported for the first time in B. juncea plant tissues.     

Synthesis and reactivity of asymmetrically substituted ansa-bridged zirconocene complexes: X-ray crystal structures of [Zr{R(H)C(η-C5Me4)(η-C5H4)}Cl2] (R = Bu, Bu) and [Zr{Bu(H)C(η-C5Me4)(η-C5H4)}(CH2Ph)2]

The dialkyl complexes, (R = Prⁱ, R′ = Me (2a), CH₂Ph (3a); R = Buⁿ, R′ = Me (2b), CH₂Ph (3b); R = Bu^t, R′ = Me (2c), CH₂Ph (3c); R = Ph, R′ = Me (2d), CH₂Ph (3d)), have been synthesized by the reaction of the ansa-metallocene dichloride complex, [Zr{R(H)C(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] (R = Prⁱ (1a), Buⁿ (1b), Bu^t (1c), Ph (1d)), and two molar equivalents of the alkyl Gringard reagent. The insertion reaction of the isocyanide reagent, CNC₆H₃Me₂-2,6, into the zirconium-carbon σ-bond of 2 gave the corresponding η²-iminoacyl derivatives, [Zr{R(H)C(η⁵-C₅Me₄)(η⁵-C₅H₄)}{η²-MeCNC₆H₃Me₂-2,6}Me] (R = Prⁱ (4a), Buⁿ (4b), Bu^t (4c), Ph (4d)). The molecular structures of 1b, 1c and 3b have been determined by single-crystal X-ray diffraction studies.     

Robust regression techniques A useful alternative for the detection of outlier data in chemical analysis

The validation of an analytical procedure means the evaluation of some performance criteria such as accuracy, sensitivity, linear range, capability of detection, selectivity, calibration curve, etc. This implies the use of different statistical methodologies, some of them related with statistical regression techniques, which may be robust or not. The presence of outlier data has a significant effect on the determination of sensitivity, linear range or capability of detection amongst others, when these figures of merit are evaluated with non-robust methodologies.In this paper some of the robust methods used for calibration in analytical chemistry are reviewed: the Huber M-estimator; the Andrews, Tukey and Welsh GM-estimators; the fuzzy estimators; the constrained M-estimators, CM; the least trimmed squares, LTS. The paper also shows that the mathematical properties of the least median squares (LMS) regression can be of great interest in the detection of outlier data in chemical analysis. A comparative analysis is made of the results obtained by applying these regression methods to synthetic and real data. There is also a review of some applications where this robust regression works in a suitable and simple way that proves very useful to secure an objective detection of outliers. The use of a robust regression is recommended in ISO 5725-5.     

A critical examination of the components of the Schlieren effect in flow analysis

The Schlieren effect is a consequence of light inflexions altering the spectrophotometric measurements that are due to the formation of optical artefacts such as mirror and lenses inside the flowing sample. It may influence signal-to-noise ratio, sample throughput and measurement repeatability in spectrophotometric flow-based procedures. It was critically examined, in order to provide guidelines for system design. Results demonstrate that the magnitude of the Schlieren effect is governed by the combined influence of two components. The first is related to loss of light by reflection at sharp liquid interfaces and prevails under poor mixing conditions. In this situation the transmitted light becomes more intense and somewhat erratic. The second is related to light refraction in regions with pronounced refractive index gradients, and prevails under good mixing conditions. It can lead to positive or negative modifications of the transmitted light, the direction being dependent on the relevance of these components. The importance of the solubility of the chemical species involved, the possibility of interactions with the inner wall of the tubing, and the feasibility of dual-wavelength spectrophotometry for compensating purposes are discussed.     

4,4′-Substituted biphenyl coronands. Preparation of a new selective fluorescent sensor for mercury salts

Six new 4,4′-substituted biphenyl coronands have been prepared. The ligands containing dimethylamino groups in the biphenyl moiety have been used in transition metal cations’ complexation and one of them (3) has demonstrated to be a selective fluorescent sensor for mercury. Stoichiometries of the formed complexes and complexation constants have been determined by titration experiments. In addition, the extractant ability of some ligands has also been studied. Finally, the electrochemical properties of some of these ligands are also described.     

Self-assembly of a tetranuclear Ni4 cluster with an S = 4 ground state: the first 3d metal cluster bearing a mu4-eta2:eta2-O,O carbonate ligand

Reaction of nickel(II) acetate with H(3)L (2-(5-bromo-2-hydroxyphenyl)-1,3-bis[4-(5-bromo-2-hydroxyphenyl)-3-azabut-3-enyl]-1,3-imidazolidine) yields [Ni(2)L(OAc)(H(2)O)(2)].3MeCN.2H(2)O (1.3MeCN.2H(2)O), crystallographically characterized. 1 is unstable in solution for a long time and hydrolyzes to give [Ni(2)L(o-OC(6)H(3)BrCHO)(H(2)O)].2.25MeCN.H(2)O (2.2.25MeCN.H(2)O). In addition, 1 uptakes CO(2) from air in a basic methanol/acetonitrile solution, yielding [[Ni(2)L(MeOH)](2)(CO(3))].1.5MeOH.MeCN.H(2)O (3.1.5MeOH.MeCN.H(2)O). The X-ray characterization of 3 reveals that it is a tetranuclear nickel cluster, which can be considered as the result of a self-assembly process from two dinuclear [Ni(2)L](+) blocks, joined by a mu(4)-eta(2):eta(2)-O,O carbonate ligand. The coordination mode of the carbonate anion is highly unusual and, to the best of our knowledge, it has not been described thus far for first-row transition metal complexes or magnetically studied until now. Magnetic characterization of 1 and 3 shows net intramolecular ferromagnetic coupling between the metal atoms in both cases, with S = 2 and S = 4 ground states for 1 and 3, respectively.