Synthesis and hydrolysis of substituted tetrahydropyrimidinium salts. Behaviour of the degradation products on varying pH

Reaction of 1,2-diaryl-3-methyl-1,4,5,6-tetrahydropyrimidinium iodides 1a-i with alkaline solutions afforded N-aroyl-N-aryl-N'-methyltrimethylenediamines 2a-i . Compounds 2 are stable under acid conditions but in neutral or alkaline media spontaneously rearrange giving N-aroyl-N'-aryl-N-methyltrimethylenediamines 3a-i . Treating compounds 3 with concentrated acids reverse reaction takes place. Kinetic studies were performed on this intramolecular N → N' aroyl transfer over the H_o-pH range -0.9 to 2.30. Compounds 3 undergo acyl transfer to give 2 by a mechanism which involves a change in the rate determining step from formation to acid-catalysed decomposition of a six-membered heterocyclic intermediate on going from H_o to pH values. The existence of maxima in the pH rate profile allow to determine apparent pKa values of the hexahydropyrimidine intermediates which gave good correlation with the Swain F substituent constants. Stability of these heterocycles was also predicted by determination of thermodinamic parameters. Comparisons are made with the behaviour of five-membered heterocyclic intermediates (imidazolidine derivatives) which were studied in an earlier paper.     

Thermal studies of pre-formulates of metronidazole obtained by spray drying technique

Compatibility studies between active drugs and excipients are substantial in the pharmaceutical technology. The objective of the present work was to develop pre-formulated mixtures of metronidazole (MT) obtained by spray drying (SPDR) and their thermoanalytical characterization. Dynamic and isothermal TG, conventional DSC and DSC coupled to a photovisual system were used. DSC experiments with both techniques confirmed the homogeneity of the conventional and pre-formulated mixtures. The TG data made possible the comparison the thermal stability of the different mixtures. Similar thermal stabilities were found of the conventional and pre-formulated mixtures, with slower particles sizes of MT.     

Transport properties of alkyltrimethylammonium bromide surfactants in aqueous solutions

Differential mutual diffusion coefficients of n-alkyltrimethylammonium bromides [CH₃(CH₂)_n–1N(CH₃)₃Br, C_nTAB] (n=10, 12, 14, 16) have been measured in aqueous solutions at 298.15 K using a conductimetric cell and an automatic apparatus to follow diffusion. The cell is based on an open-ended capillary, and the technique follows the diffusion process by measuring the resistance of a solution inside the capillaries at various times. The electrical conductances of those solutions have also been measured to calculate the critical micellar concentration (cmc). Thermodynamic analysis of the data suggests that the free ion concentration decreases at concentrations above the cmc, in agreement with theoretical predictions. The obtained values of the micellization parameters were used to model the mutual diffusion coefficients of C_nTAB aqueous solutions.     

Microgravimetric study of electrochemically controlled nucleophilic addition of sulfite to polyaniline

The sulfonation of polyaniline (PANI) films by nucleophilic addition of sulfite ion has been controlled through the polymer oxidation state under electrochemical control. The process was monitored by in situ electrochemical quartz crystal microbalance (EQCM), and the polymer oxidation was accomplished by electrode potential steps in sulfite aqueous solutions. The nucleophilic addition of sulfite to PANI only takes place on the oxidized polymer. From the ratio of added mass to the injected charge, the degree of sulfonation has been obtained with a yield as high as 50%. It has been observed that the ion-exchange mechanism during the oxidation-reduction process in the resulting sulfonated polymer is analogous to the polymer produced by electrophilic sulfonation of polyaniline or by copolymerization of aniline with aminosulfonic acids, unlike the ionic exchange observed for unmodified PANI.     

Cluster Build-up Reactions using Di-gold Cationic Fragments: Synthesis and Structural Characterization of [Os7(CO)19(Au2dppm)]

The reaction of the di-gold cation [Au₂(dppx)]²⁺ with the heptanuclear cluster dianion [Os₇(CO)₂₀]^2– affords the mixed metal cluster [Os₇(CO)₂₀{Au₂(dppx)}] (x=m (1), e (2), b (3)). On standing, in solution, this complex undergoes decarbonylation to give the cluster [Os₇(CO)₁₉{Au₂(dppx)}] (x=m (4), e (5), b (6)). The complexes have been characterised spectroscopically, and an X-ray structure determination of the dppm derivative shows that it contains a metal core based on an Os₇ edge-bridged bicapped tetrahedron with the two ₃-Au atoms capping adjacent triangular Os₃ faces of the central tetrahedron. In an analogous reaction, the carbido anion [Os₇(H)C(CO)₁₉]^– affords the neutral cluster [Os₇C(CO)₁₉{Au₂(dppm)}] (7) when treated with [Au₂(dppm)]²⁺ in the presence of base.     

Electrodynamic investigations of conduction processes in humid microcrystalline cellulose tablets

The conduction mechanism in microcrystalline cellulose (MCC) tablets at varying relative humidity (RH) has been investigated by using the techniques of low frequency dielectric spectroscopy and transient current analysis at room temperature. The dependence on RH on the measured conductivity and charge carrier density indicates that a high-power-law-exponent percolation process of cations being conducted on water molecules occupying available 6-OH units on the cellulose chains is the dominating dc conduction mechanism at RH below 3 wt % of moisture content. The experimentally observed decrease in charge carrier mobility with increasing moisture content shows that protons and H3O+ ions that are being blocked at empty 6-OH sites also contribute to the charge transport process in cellulose at low moisture contents.     

Solid-state photodimerization of steroid enones

Androst-4-ene-3,17-dione (1) and 17alpha-methyltestosterone (2) are dimerized in the solid-state by UV radiation. These substances were selected by a search in the CSD among the steroid enones presenting in the crystalline state an intermolecular short contact between a hydrogen alpha to a carbonyl group and the oxygen of an enone system. Dimerization occurs by transfer of the hydrogen to the oxygen and connection between the two involved carbons. Androst-4-ene-3,17-dione (1) affords dimer 3 and trimer 4, both formed by connection of the C-16 of a molecule with the C-3 of a near one. Irradiation of 17alpha-methyltestosterone (2) gives the isomeric trienones 5 and 6. These compounds are reasonably formed by dehydration of unisolated intermediate products 7 and/or 8 obtained by coupling of two molecules through a linkage between the C-2 and the C-3' carbons. The formation mechanisms of the photoproducts are satisfactory explained on the basis of the molecular arrangement of the monomers in the crystal state. Modeling of the dimeric molecules was done using molecular mechanics calculations. A single-crystal X-ray of the dimer of androst-4-ene-3,17-dione confirms the structural interpretation of spectral data. The conformer found in the solid-state agrees well with the results of molecular mechanics calculations.     

Complex emulsion inversion pattern associated with the partitioning of nonionic surfactant mixtures in the presence of alcohol cosurfactant

Commercial ethoxylated nonionic surfactant mixtures containing alcohol cosurfactant exhibit a three-phase behavior whose formulation strongly varies with the water/oil ratio. As a consequence, a change in water/oil ratio can result in a sequence of up to three different emulsion inversion processes, through a combination of formulation and composition effects.     

New developments in the synthesis of pyrrolizidinone-based dipeptide isosteres

1,3-Dipolar cycloaddition of acrylamide with the cyclic nitrone derived from proline tert-butyl ester has been employed in the synthesis of bicyclic Gly-(s-cis)Pro isosteres suitably protected for the Fmoc-based solid phase peptide synthesis. (R)-1-Phenylethylamine was introduced as chiral auxiliary to resolve racemic intermediates and obtain enantiopure compounds. Using methacrylamide as dipolarophile, the analogous Ala-Pro mimetics have been prepared in racemic form, whereas the same strategy applied to methyl itaconate failed to give the corresponding Asp-Pro mimetic.     

Ion chromatography characterization of polysaccharides in ancient wall paintings

Specific programming of automated HPLC systems allows total on-line qualification, validation and stability monitoring using the concept of deferred standards. Setting up such a process for routine analyses in an automated HPLC system requires specific autosampler programming as well as specific monitoring software. With an autosampler, a double injection procedure is programmed, the first introducing the sample, and the second, a few minutes deferred, the deferred control standard. Two additional compounds are therefore added to the sample before and during the chromatographic process: the intemal standard for sample quantification and the deferred standard for system control. Specific methodologies are described of how to obtain classical quantitative analysis information as well as system qualification validation stability information. Experiments were performed to develop specified methodologies to monitor the quality of quantitative analysis during the life of the column by using the deferred standard concept to probe the effects of column ageing on separation characteristics.