Preferred orientation in filtercakes of kaolinite

The orientational order parameter of dense colloidal dispersions of plate-like particles as a function of volume fraction is measured using neutron diffraction. This non-invasive experimental approach directly provides the full particle orientation distribution from which the order parameters can be calculated. The orientation parameters are shown to be linked to the solids fractions of the cakes and the macroscopic permeability of the samples. However, this study suggests that, although orientation can be relevant for a given system, other factors can have a stronger influence, for example, the degree of dispersion or colloidal stability of the clay and may be the principle factor that controls permeability. In addition, we report enhanced ordering of these materials under the influence of an external cross-flow field.     

Kinetics and Mechanism of Ni(II) Chelation in Model and Real Solutions of Xylem Sap of Quercus ilex

The kinetics of formation and dissociation of Ni(II) complexes with oxalic and citric acids was studied by cyclic voltammetry in model solutions of xylem sap of Q. ilex (the dominant tree growing on serpentine soils of Northeast Portugal) using representative concentrations, pH and ionic strength. The role of magnesium on complex formation was analyzed from solutions where Mg is present at concentration levels found in the xylem sap of Q. ilex growing on both nonserpentine and serpentine soils. Kinetics studies were also done in diluted solutions of real xylem sap samples, spiked with increasing amounts of magnesium. The values obtained for the apparent rate constants were those anticipated by the proposed model. To test the validity of the methodology and mechanisms, formation rate constants, k_f (M^?1 s^?1) of Ni(II) complexes with citrate and oxalate were evaluated that compare with the values from Eigen mechanism.     

Potentiometric, luminescence and NMR study of the interaction of Eu with glyceryl phosphates

Complexation of europium(III) with glyceryl-1- and -2-phosphates has been studied by metal ion luminescence, ¹H and ¹³C NMR spectroscopy and potentiometry. From the luminescence and NMR studies, the formation of a 1:1 inner-sphere complex, in which the glyceryl phosphate is directly bound to the metal, is confirmed. Similar apparent binding constants at pH 2 were obtained by the three methods. Values obtained by NMR at pH 2 are 53 M⁻¹ and 12 M⁻¹ for glyceryl-1- and -2-phosphate, respectively. By comparison with literature data on related systems it is suggested that the ligands bind through the phosphate group. To obtain structural information from the NMR data, complexation has also been studied with the lanthanide ions Dy(III), Er(III) and Gd(III) using both chemical shift and relaxation data. From this, metal-proton distance ratios have been calculated. Comparison of ¹H and ¹³C NMR spectral data in the presence of paramagnetic lanthanides suggests conformational equilibria in the solutions. From the potentiometric studies, global formation constants have been determined, and speciation diagrams obtained over the pH range 1.5pH7.0 for ligand/metal ratios of 1 and 30. Implications of these results on lanthanide induced fusion of phospholipid membranes are discussed.     

Application of fluorescence reactions in the ring oven segment technique

Summary The ring oven segment technique already described earlier has been applied to the determination of ng- tog-amounts of organic and inorganic substances using fluorescence reactions. The methods proposed here are based either on self-fluorescence or on appearance or disappearance of fluorescence following a chemical reaction.

---

Anwendung von Fluoreszenzreaktionen in der Ringofen-Segmenttechnik

Zusammenfassung Die bereits früher beschriebene Ringofen-Segmenttechnik wurde auf die Bestimmung organischer und anorganischer Substanzen im ng- bisg-Bereich mit Hilfe von Fluoreszenzreaktionen angewendet. Die hier vorgeschlagenen Methoden beruhen entweder auf Eigenfluoreszenz oder aber auf der Bildung bzw. dem Verschwinden von Fluoreszenz nach einer chemischen Reaktion.

     

C36填充单壁碳纳米管的结构和电子性质

The structures and electronic properties for C36 encapsulated in four single-wall armchair carbon nanotubes (C36@(n,n), n=6-9) were calculated using ab initio self-consistent field crystal orbital method based on density functional theory. The calculations show that the interwall spacing between the carbon nanotube and C36 plays an important role in the stabilities of resultant structures. The optimum interwall spacing is about 0.30 nm and the tubes can be considered as inert containers for the encapsulated C36. The Fermi levels and relative position of energy bands also have something to do with the interwall spacing. The shifts of Fermi level and C36-derived electron states modulate the electron properties of these structures. The extra electrons fill the bands of C36@(8,8) with the optimum interwall spacing almost in a rigid-band manner.     

Study of the diclofenac/phospholipid interactions with liposomes and monolayers

The interaction of diclofenac sodium (SD) with soya phosphatidylcholine (SPC) has been studied with floating Langmuir monolayers and liposomes. SD was either introduced into the subphase of SPC monolayers or co-spread with SPC on an aqueous subphase. In both cases, SD caused the surface pressure isotherm to become more expanded, thus demonstrating the affinity between SD and SPC. The incorporation of SD caused SPC liposomes to have a decreased diameter according to light scattering experiments. When SPC liposomes were injected into an aqueous subphase, their destruction yielding surface-active monomers could be monitored by changes in surface pressure. SD-loaded liposomes displayed a much faster kinetics when the surface density of surface-active monomers was plotted against time, with rate constants increasing significantly with the SD concentration. The kinetic profile can be quantitatively analyzed by plotting ln[1 - (gamma/gamma infinity)] versus t1/2.     

Carbon-carbon coupling on tetrahedral iridium clusters: X-ray molecular structures and multinuclear NMR studies of the two isomeric forms of [Ir4(CO)6(μ3-η-HCCPh)(μ2-η-C4H2Ph2)(μ-PPh2)2]

The reactions of [HIr₄(CO)₉(Ph₂PCCPh)(μ-PPh₂)] (1) or [Ir₄(CO)₈(μ₃-η²-HCCPh)(μ-PPh₂)₂] (2) with HCCPh gave two isomeric forms of [Ir₄(CO)₆(μ₃-η²-HCCPh)(μ₂-η⁴-C₄H₂Ph₂)(μ-PPh₂)₂] (3 and 4) in good yields as the only products. These compounds were characterized with analytical and spectroscopic data including ¹H, ¹³C and ³¹P NMR (1 and 2D) spectroscopy and their molecular structures were established by X-ray diffraction studies. Compounds 3 and 4 exhibit the same distorted butterfly metal polyhedral arrangement of metal atoms with two μ-PPh₂ that occupy different positions in the structures of the two isomers. Both molecules contain a HCCPh ligand bonded in a μ₃-η²-// mode to one of the wings of the butterfly and a metallacyclic ring, which resulted from head-to-tail coupling, in the case of [Ir₄(CO)₆(μ₃-η²-HCCPh){μ₂-η⁴-(H)CC(Ph)C(H)C(Ph)}(μ-PPh₂)₂] (3) and tail-to-tail coupling, in that of [Ir₄(CO)₆(μ₃-η²-HCCPh){μ₂-η⁴-(H)CC(Ph)C(Ph)C(H)}(μ-PPh₂)₂] (4), and which is linked to two metal atoms of the second wing of the butterfly.     

Electrocatalysis of the SiC Particle‐Modified Glassy Carbon Electrode for the Oxidation of Adrenaline

The electrocatalytic properties of the SiC particle‐modified glassy carbon electrode (MGC) for adrenaline oxidation were studied by cyclic voltammetry (CV), double‐potential step chronocoulometry (DPSCC), and electrochemical impedance spectroscopy (EIS) techniques in McIlvaine buffer solution. It was shown that the electrode modified with SiC particles markedly displayed an electrocatalytic effect on the process of the electrochemical reaction of adrenaline, i.e., the activity and the reversibility of the MGC electrode has been significantly improved. This was attributed to the adsorption effect of the electroactive adrenaline molecules on the MGC electrode surface.     

Preparation and Characterization of Trimethylsilylpyridylacetylene Bridged,Dicobalt Carbonyl Complexes Containing Bis(diphenylphosphino)methylene or Bis(diphenylphosphino)ethylene Ligand

Reaction of an alkyne‐bridged dicobalt complex, [Co₂(CO)₆(μ‐Me₃SiC=Cpy)] 4 , with bis(diphenylphosphino)methylene (DPPM) or bis(diphenylphosphino)ethylene (DPPE) in THF at 55 °C yielded a DPPM or DPPE doubly bridged dicobalt compound, [{μ‐P,P‐PPh₂CH₂PPh₂}Co₂(CO)₄(μ‐Me₃SiC=Cpy)] 5 or [{μ‐P,P‐PPh₂CH₂CH₂PPh₂}Co₂(CO)₄(μ‐Me₃SiC≡Cpy)] 6 . Compound 5 and 6 were characterized by spectroscopic means as well as X‐ray crystal structure determination.     

Novel Synthesis of Dihydroquinoxalinylpyridazine Derivatives

Methylquinoxaline derivative 1 undergoes bromination to give bromomethyl quinoxaline 2 , which could be transferred to cyanomethyl quinoxaline 3 . The latter compound 3 readily coupled with arene diazonium salts to give hydrazone derivatives 5a‐c . Compounds 5a,b reacted with active methylene reagents to give the target ring system, quinoxalinylpyridazine derivatives 8a‐c . Compound 1 reacted with DMFDMA to give the enamine derivative 9 , which coupled with arene diazonium salts to give the aldehydic hydrazone derivatives 10a‐c . Compound 10 reacted with active methylene compounds to give quinoxalinylpyridazine derivatives. UV characterization of some of the prepared compounds was reported.