In Vitro Antioxidant,Antitumor and Photocatalytic Activities of Silver Nanoparticles Synthesized Using Equisetum Species: A Green Approach

The ethanolic extracts of three Equisetum species (E. pratense Ehrh., E. sylvaticum L. and E. telmateia Ehrh.) were used to reduce silver ions to silver nanoparticles (AgNPs). The synthesized AgNPs were characterized using UV-Vis spectrophotometry, Fourier Transform Infrared Spectroscopy (FTIR), Energy Dispersive X-ray (EDX), Transmission Electron Microscopy (TEM) and Dynamic Light Scattering (DLS) measurements. FTIR data revealed the functional groups of biomolecules involved in AgNPs synthesis, such as O-H, C-H, C=O, C-O, and C-C. EDX spectroscopy was used to highlight the presence of silver, while DLS spectroscopy provided information on the mean diameter of AgNPs, that ranged from 74.4 to 314 nm. The negative Zeta potential values (−23.76 for Ep–AgNPs, −29.54 for Es–AgNPs and −20.72 for Et–AgNPs) indicate the stability of the obtained colloidal solution. The study also focused on establishing the photocatalytic activity of AgNPs, which is an important aspect in terms of removing organic dyes from the environment. The best photocatalytic activity was observed for AgNPs obtained from E. telmateia, which degraded malachite green in a proportion of 97.9%. The antioxidant action of the three AgNPs samples was highlighted comparatively through four tests, with the best overall antioxidant capacity being observed for AgNPs obtained using E. sylvaticum. Moreover, the biosynthesized AgNPs showed promising cytotoxic efficacy against cancerous cell line MG63, the AgNPs obtained from E. sylvaticum L. providing the best result, with a LD₅₀ value around 1.5 mg/mL.     

Physicochemical Characterization and Paper Spray Mass Spectrometry Analysis of Myrciaria Floribunda (H. West ex Willd.) O. Berg Accessions

Myrciaria floribunda, also known as rumberry, is a tree native to the Brazilian Atlantic Forest, where its fruits have the potential for commercial use. This study evaluates the antioxidant potential, determines the phytochemical profile, and chemically characterizes the rumberry fruit. Accessions were sampled from the Rumberry Active Germplasm Bank of the Federal University of Alagoas, Brazil. Physical characteristics, chemical characteristics, and phenolic compound content were analyzed. Chemical profile characterization was carried out using PSMS. Accessions had an average weight of 0.86 g. Accession AC137 presented a higher pulp yield (1.12 g). AC132 and AC156 had larger fruits, AC137 showed greater firmness (5.93 N), and AC160 had a higher and total phenolic content ratio (279.01 ± 11.11). Orange-colored accessions scored higher in evaluated parameters, except for AC160 for phenolic content. Thirty-two compounds were identified on positive ionization mode and 42 compounds on negative ionization mode using PSMS. Flavonoids, followed by the derivatives of benzoic acid, sugars, and phenylpropanoids, were the most prominent. Myricitrin, quercitrin, and catechin stand out as flavonoids that have been reported in previous studies with antioxidant and antimicrobial properties, in addition to health and therapeutical benefits, demonstrating the potential of the rumberry fruit.     

Alkenyl Boronates: Synthesis and Applications

Organoboron compounds have become one of the most versatile building blocks in organic synthesis owing to their accessible and efficient conversion into many different functional groups. In particular, alkenyl boronates have received a great deal of attention as very reactive substrates in Suzuki–Miyaura cross‐coupling reactions. Accordingly, efforts towards the development of efficient methods to prepare this type of compound are ongoing. In this contribution, the progress in the search for synthetic routes for alkenyl boronates and their use in a variety of organic transformations is accounted.     

Synthesis of Azobenzene Dyes Mediated by CotA Laccase

An eco‐friendly protocol for the synthesis of azobenzene dyes by oxidative coupling of primary aromatic amines is reported. As efficient biocatalytic systems, CotA laccase and CotA laccase/ABTS (2,2′‐azinobis(3‐ethylbenzothiazoline‐6‐sulfonic acid)) enable the oxidation of various substituted anilines, in aqueous medium, ambient atmosphere and under mild reaction conditions of pH and temperature. A series of azobenzene dyes were prepared in good to excellent yields in an one‐pot reaction. A mechanistic proposal for the formation of the azo derivatives is presented. Our strategy offers an alternative approach for the direct synthesis of azobenzene dyes, avoiding the harsh conditions generally required for most of the traditional synthetic methods.     

Designing Self-Assembled Rosettes: Why Ammeline is a Superior Building Block to Melamine

In supramolecular chemistry, the rational design of self-assembled systems remains a challenge. Herein, hydrogen-bonded rosettes of melamine and ammeline have been theoretically examined by using dispersion-corrected density functional theory (DFT-D). Our bonding analyses, based on quantitative Kohn–Sham molecular orbital theory and corresponding energy decomposition analyses (EDA), show that ammeline is a much better building block than melamine for the fabrication of cyclic complexes based on hydrogen bonds. This superior capacity is explained by both stronger hydrogen bonding and the occurrence of a strong synergy.     

Scale-up and Sustainability Evaluation of Biopolymer Production from Citrus Waste Offering Carbon Capture and Utilisation Pathway

Poly(limonene carbonate) (PLC) has been highlighted as an attractive substitute to petroleum derived plastics, due to its utilisation of CO₂ and bio-based limonene as feedstocks, offering an effective carbon capture and utilisation pathway. Our study investigates the techno-economic viability and environmental sustainability of a novel process to produce PLC from citrus waste derived limonene, coupled with an anaerobic digestion process to enable energy cogeneration and waste recovery maximisation. Computational process design was integrated with a life cycle assessment to identify the sustainability improvement opportunities. PLC production was found to be economically viable, assuming sufficient citrus waste is supplied to the process, and environmentally preferable to polystyrene (PS) in various impact categories including climate change. However, it exhibited greater environmental burdens than PS across other impact categories, although the environmental performance could be improved with a waste recovery system, at the cost of a process design shift towards energy generation. Finally, our study quantified the potential contribution of PLC to mitigating the escape of atmospheric CO₂ concentration from the planetary boundary. We emphasise the importance of a holistic approach to process design and highlight the potential impacts of biopolymers, which is instrumental in solving environmental problems facing the plastic industry and building a sustainable circular economy.     

Analytical study of the Middle Kingdom group of gold jewellery from tomb 124 at Riqqa,Egypt

The jewellery from tomb 124 at Riqqa, consisting of one pectoral and one winged beetle in gold and cloisonné work, one gold shell pendant decorated with wires and granulation, and one hollow gold amulet in the form of god Min, was analysed by handheld X-ray fluorescence and scanning electron microscopy with energy-dispersive X-ray spectroscopy. This group of jewellery, dated to the second half of the 12th Dynasty (c. 1900–1840 B.C.), was excavated inside the coffin of an adult male, which had been crushed after burial by the collapse of the chamber roof during an episode of looting. Both the male and the looter's body were found inside the chamber, evidencing that the group of jewellery was intact. Despite having been highly restored in the past, as referenced in the correspondence between the excavator Flinders Petrie and the curators of the Manchester Museum, it could be shown that the jewellery was produced using Ag-rich electrum alloys containing platinum group element inclusions that indicate the use of alluvial gold. The analysis of some joins has confirmed the use of hard-soldering, with solders obtained by addition of Cu to the base-alloy. Data obtained for the jewellery of tomb 124 were compared with data previously obtained for tomb 296, also excavated at Riqqa, but dated to the 18th Dynasty. The comparison demonstrates the continuity of the workshop traditions in one location between the Middle Kingdom and the New Kingdom but also reveals discrepancies in the alloys employed in those two periods.     

Arduino-based chaotic secure communication system using multi-directional multi-scroll chaotic oscillators

The experimental realization of a chaotic secure communication system is introduced herein taking advantage of Arduino’s open source integrated development environment along with its preset functions that reduce development time and complexity. The system uses multi-directional multi-scroll chaotic oscillators that are based on piecewise-linear functions. Experimental results are given for chaos generators in 1-direction (1-D), 2-D and 3-D of up to 20, \(20\times 20\) and \(20\times 20\times 20\) scrolls, respectively. Using two chaos generators, a chaotic secure communication system is implemented in a master–slave topology by applying generalized Hamiltonian forms and observer approach. Finally, we detail experimental results for the synchronization of \(6\times 6\) and \(20\times 20\) scroll attractors, which are used for transmitting a monochromatic image through the Arduino-based chaotic secure communication system.     

On some Closed Magnetic Curves on a 3-torus

We consider two magnetic fields on the 3-torus obtained from two different contact forms on the Euclidean 3-space and we study when their corresponding normal magnetic curves are closed. We obtain periodicity conditions analogues to those for the closed geodesics on the torus.     

Supercritical CO2 Assisted Impregnation of Ibuprofen on Medium-Chain-Length Polyhydroxyalkanoates (mcl-PHA)

In this work, we propose the utilization of scCO₂ to impregnate ibuprofen into the mcl-PHA matrix produced by Pseudomonas chlororaphis subs. aurantiaca (DSM 19603). The biopolymer has adhesive properties, is biocompatible and has a melting temperature of 45 °C. Several conditions, namely, pressure (15 and 20 MPa) and impregnation time (30 min, 1 h and 3 h) were tested. The highest ibuprofen content (90.8 ± 6.5 mg of ibuprofen/g_PHA) was obtained at 20 MPa and 40 °C, for 1 h, with an impregnation rate of 89 mg/(g·h). The processed mcl-PHA samples suffered a plasticization, as shown by the decrease of 6.5 °C in the T_g, at 20 MPa. The polymer’s crystallinity was also affected concomitantly with the matrices’ ibuprofen content. For all the impregnation conditions tested the release of ibuprofen from the biopolymer followed a type II release profile. This study has demonstrated that the mcl-PHA produced by P. chlororaphis has a great potential for the development of novel topical drug delivery systems.