Diasterodivergent synthesis of optically pure vinyl episulfides and β-hydroxy thiocyanates from a bacterial metabolite

Diasterodivergent episulfides were chemoenzymatically derived from bromobenzene by sequential toluene dioxygenase dihydroxylation, followed by chemical epoxidation and thiolysis. The epoxide ring-opening by thiocyanate ion under literature conditions rendered the corresponding hydroxy thiocyanates and not the thiiranes as usually observed. Ring closing under carefully optimized conditions allowed the preparation of optically pure thiiranes that are key precursors for the preparation of thioconduritols and pseudodisaccharides.     

Oxobenzo[f]benzopyrans as new fluorescent photolabile protecting groups for the carboxylic function

The properties of three oxobenzo[f]benzopyrans as new fluorogenic photolabile protecting groups for the carboxylic function of amino acids were studied. Fluorescent amino acid conjugates were efficiently prepared and characterised. Photodeprotection of these compounds was carried out by irradiation at 300, 350 and 419 nm, the most suitable wavelength being 350 nm, on account of short irradiation times and good deprotection yields.     

Etude par diffraction X et microscopie electronique du système CaTiO3---Ca2Fe2O5

In order to check the extended defect model previously proposed for the nonstoichiometric perovskite A_nM_nO_3n−1 (n 2), the Ca₂Ti_2−2xFe_2xO_6−x solid solution has been studied by means of X-ray diffraction and electron microscope investigations. The results show the existence of a continuous evolution (0 x 1) with two different regions. Close to the CaTiO₃ composition (0 x 0.40) the oxygen vacancies seem to be randomly distributed and the symmetry remains pseudocubic. In the composition range 0.55 x 1, the electron microscope patterns show an ordering of the defects: the oxygen vacancies are ordered in the (0k0) planes in strings parallel to the [101] direction. It is concluded from these observations that perpendicular to the Oy direction isolated planes of tetrahedra arranged in rows separate planes of corner-linked octahedra. The n = 2; 2.5; 3, et 4 terms of the A_nM_nO_3n−1 series have been identified. C.S. planes characteristic of classical nonstoichiometric oxides with small cations do not appear: instead, tetrahedra planes succeed to the previous octahedra planes as the degree of nonstoichiometry increases.

Résumé

Afin de vérifier le modèle de non-stoechiométrie proposé dans un travail précédent pour les perovskites lacunaires A_nM_nO_3n−1 (n 2), la solution solide Ca₂Ti_2−2xFe_2xO_6−x a été, étudiée par diffraction X et microscopie électronique. Les résultats montrent l'existence d'une évolution continue (0 x 1) avec deux domaines différents. Pour les compositions proches de CaTiO₃ (0 x 0.40), les lacunes oxygénées semblent être distribuées statistiquement et la symétrie demeure pseudocubique. Dans le domaine de compositions 0.55 x 1, les images de microscopie électronique montrent un ordre des défauts: les lacunes d'oxygène sont ordonnées dans les plans (0k0) en rangées parallèles à la direction [101]. Ces observations ont permis de conclure que perpendiculairement à la direction Oy des plans isolés de files de tétraèdres séparent des plans d'octaèdres liés par leurs sommets. Les termes n = 2; 2.5; 3 et 4 des séries A_nM_nO_3n−1 ont été identifiés. Des plans de cisaillement rencontrés dans les oxydes non-stoechiométriques classiques de petits cations n'ont pas été mis en évidence: par contre, des plans de tétraèdres se substituent aux plans d'octaèdres initiaux lorsque le degré de non-stoechiométrie augmente.     

Solution conformation of a nitrobenzoxadiazole derivative of the polyene antibiotic nystatin: a FRET study

Nystatin is a polyene antibiotic frequently applied in the treatment of topical fungal infections. In this work, a 7-nitrobenz-2-oxa-1,3-diazole (NBD) hexanoyl amide derivative of nystatin was synthesized and its detailed photophysical characterization is presented. The average conformation of the labelled antibiotic in tetrahydrofuran, ethanol and methanol was determined by intramolecular (tetraene to NBD) fluorescence resonance energy transfer measurements. At variance with the literature [Can. J. Chem. 63 (1985) 77-85], it was concluded that there is no need to invoke a solvent-dependent conformational equilibrium between extended and closed conformers of the antibiotic, because the mean tetraene-to-NBD separating distance was found to remain constant (approximately 18 A) in all the solvents studied. In addition, the large solvent dependence of the fluorescence anisotropy observed for the non-derivatized nystatin, was rationalized on the basis of the prolate ellipsoidal geometry of the molecule. It was concluded that the rod shaped and amphipathic antibiotic remains monomeric in different solvents within the concentration range studied (2-20 microM).     

Theoretical study of the electronic structure of CnS (n=1-6) thiocumulenes

Linear sulfur-carbon chains C(n)S (n=1-6) of astronomical interest were examined by means of several theoretical methods. The three smallest compounds of the series were chosen to evaluate the performance of several computational models, including Hartree-Fock theory, density functional theory with the Becke's three parameter exchange functional and the correlation functional of Lee, Yang, and Parr (B3LYP), and electron-correlated methods (second-order Moller-Plesset perturbation method (MP2), configuration interaction method including single and double excitations (CISD), and quadratic configuration interaction method including single and double excitations (QCISD) in combination with a large variety of basis sets. The systematic comparison between the experiment and theory indicates that the B3LYP/6-311G** method can be considered suitable for the study of the electronic structures of the C(n)S compounds. The electronic ground states of the C(n)S molecules alternate between 1Sigma and 3Sigma for odd and even values of n, respectively. The B3LYP/6-311G** wave functions for these electronic ground states were analyzed by means of the atoms in molecules (AIM) and natural bond orbital (NBO) methods. Both approaches suggest that the electronic structures for the singlet and triplet compounds must be considered separately. According to the NBO method, singlet compounds can be properly represented by acetylenic structures with alternating single and triple bonds (S[triple bond]C-C[triple bond]C...). However, triplet compounds are better described by means of double bond-double bond cumulenic structures (S=C=C=C=C...) as a consequence of the average between different alpha and beta electronic densities. AIM delocalization indexes and NBO interactions between localized orbitals also indicate that these structures are strongly pi delocalized. Finally, the different singlet and triplet structures proposed provide a consistent explanation for the geometries, dipole moments, and spin-density values of the C(n)S compounds studied.     

New macrocycles derived from biphenyl for pH-switched solvent extraction

Four new fluorescent macrocyclic ligands derived from biphenyl are described. The new compounds have been used in liquid-liquid extraction experiments and the influence of pH has been studied in those ligands containing carboxylic groups. The results obtained for the latter ligands have been compared with those observed in the presence of an external acid.     

Influence of structure and solubility of chain transfer agents on the RAFT control of dispersion polymerisation in scCO2

Reversible addition–fragmentation chain transfer (RAFT) dispersion polymerisation of methyl methacrylate (MMA) is performed in supercritical carbon dioxide (scCO₂) with 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid (DDMAT) present as chain transfer agent (CTA) and surprisingly shows good control over PMMA molecular weight. Kinetic studies of the polymerisation in scCO₂ also confirm these data. By contrast, only poor control of MMA polymerisation is obtained in toluene solution, as would be expected for this CTA which is better suited for acrylates. In this regard, we select a range of CTAs and use them to determine the parameters that must be considered for good control in dispersion polymerisation in scCO₂. A thorough investigation of the nucleation stage during the dispersion polymerisation reveals an unexpected “in situ two-stage” mechanism that strongly determines how the CTA works. Finally, using a novel computational solvation model, we identify a correlation between polymerisation control and degree of solubility of the CTAs. All of this ultimately gives rise to a simple, elegant and counterintuitive guideline to select the best CTA for RAFT dispersion polymerisation in scCO₂.

RAFT dispersion polymerisation of methyl methacrylate is performed in scCO₂ with 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid (DDMAT) present as chain transfer agent (CTA) and surprisingly shows good control over PMMA molecular weight.     

Indene and pseudoazulene discotic liquid crystals: a synthetic and structural study

Several new liquid-crystalline indene and pseudoazulene systems are reported. These molecules give rise to either columnar hexagonal mesophases and/or columnar plastic phases. The unique nature of these compounds stems from their non-classical discotic structure. Although the molecules have rigid aromatic cores, they lack terminal tails and instead the polarizable atoms (S, halogens) or polar groups (CN, CO) act as unusual soft parts. On the basis of many structurally related materials, we conclude that for this type of compound molecular stacking in the solid state is a prerequisite for the appearance of a columnar mesophase, although other intermolecular interactions within the layers are also important in establishing liquid-crystalline order. The behavior reported for these mesomorphic molecules opens up new possibilities in the search for related molecular interactions that might be useful for the construction of supramolecular architectures with particular properties.     

Reaction of 2H-azirine phosphine oxide and -phosphonates with nucleophiles. Stereoselective Synthesis of functionalized aziridines and alpha- and beta-aminophosphorus derivatives

[reaction: see text] A simple and efficient stereoselective synthesis of aziridine-2-phosphonate 3, and -phosphine oxide 5 by diastereoselective addition of Grignard reagents to 2H-azirine phosphonate 1 and -phosphine oxide 4 is reported. Similarly, the addition of heterocyclic amines and benzenethiol to aziridines 1 and 4 yielded functionalized aziridines 10, 11, and 18. These aziridines are used as intermediates for the regioselective synthesis of beta-aminophosphine oxides 6 and beta-aminophosphonates 7, as well as alpha- aminophosphonates 8. Phenylsulfenyl-substituted alpha-aminophosphorus derivatives 15 and 19 are obtained directly from benzenethiol and 2H-azirine phosphonates 1 and -phosphine oxides 4.     

Electrochemical Synthesis of MII Complexes with a Schiff Base containing an Amido Group. Crystal Structure of a Cobalt(II) Complex with a Reorganised Ligand

M(HL)(H₂O)_n complexes have been obtained by the electrochemical reaction of Fe, Co, Ni, Cu, Zn and Cd anodes with the potentially pentadentate and trianionic asymmetrical Schiff base 3‐aza‐N‐{2‐[1‐aza‐2‐(5‐nitro‐2‐hydroxylphenyl)‐vinyl]phenyl}‐4‐(5‐nitro‐2‐hydroxyphenyl)but‐3‐enamide (H₃L), containing a hard amido donor atom. The complexes have been characterized by elemental analysis, mass spectrometry, IR and ¹H NMR spectroscopies, magnetic measurements and molar conductivities. Co(HL)(H₂O) ( 2 ) has been found to rearrange in DMF solution into a crystallographically solved octahedral complex, CoL¹(H₂O)₂ ( 7 ) [where H₂L¹ is the symmetrical Schiff base ligand N,N′‐(1,2‐phenylene)‐bis(5‐nitro‐3‐hydroxysalicylidenimine)]. A hydrolysis mechanism is discussed to explain this rearrangement.