Effect of excess halide on the palladium‐catalyzed insertion‐triggered radical copolymerization of methyl acrylate and 1‐hexene

[Pd₂(μ‐Cl)₂(C₆F₅)₂(tht)₂] ( 1 ) is a very efficient initiator of the radical polymerization of methyl acrylate, but it is not active in the polymerization of methyl methacrylate or in the copolymerization with 1‐hexene. The addition of an excess of NBu₄Cl to solutions of [Pd₂(μ‐Cl)₂(C₆F₅)₂(tht)₂] ( 1 ) provides an initiator system that copolymerizes methyl acrylate and 1‐hexene by an insertion‐triggered radical mechanism. Random copolymers are obtained with 11% incorporation of 1‐hexene in moderate yields (about 35%). Studies of the decomposition products obtained after the first insertion of methyl acrylate in the Pd? C₆F₅ bond of 1 show that the addition of excess halide in the presence of monomer favors the homolytic cleavage of the Pd? C bond, and the generation of the radicals that are active species in the polymerization, versus alternative evolution pathways. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5682–5691, 2006     

Single electron transfer–degenerative chain transfer living radical polymerization of N‐butyl acrylate catalyzed by Na2S2O4 in water media

Living radical polymerization of n‐butyl acrylate was achieved by single electron transfer/degenerative‐chain transfer mediated living radical polymerization in water catalyzed by sodium dithionate. The plots of number–average molecular weight versus conversion and ln[M]₀/[M] versus time are linear, indicating a controlled polymerization. This methodology leads to the preparation of α,ω‐di(iodo) poly (butyl acrylate) (α,ω‐di(iodo)PBA) macroinitiators. The influence of polymerization degree ([monomer]/[initiator]), amount of catalyst, concentration of suspending agents and temperature were studied. The molecular weight distributions were determined using a combination of three detectors (TriSEC): right‐angle light scattering (RALLS), a differential viscometer (DV), and refractive index (RI). The methodology studied in this work represents a possible route to prepare well‐tailored macromolecules made of butyl acrylate in an environmental friendly reaction medium. Moreover, such materials can be subsequently functionalized leading to the formation of different block copolymers of composition ABA. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2809–2825, 2006     

N,N‐dimethylaminopyridine as initiator in the copolymerization of diglycidylether of bisphenol A with six‐membered cyclic carbonates

N,N‐Dimethylaminopyridine (DMAP) was used as initiator to cure mixtures of diglycidylether of bisphenol A (DGEBA) and 1,3‐dioxan‐2‐one (TMC) or 5,5‐dimethyl‐1,3‐dioxan‐2‐one (DMTMC). The curing was studied by differential scanning calorimetry (DSC) and Fourier transform infrared in the attenuated‐total‐reflection mode (FTIR/ATR). FTIR/ATR was used to monitor the competitive reactive processes and to quantify the evolution of the groups involved in the curing. We observed the formation of five‐membered cyclic carbonates and anionic carbonate groups that remain unreacted at the chain ends. The formation of these groups was explained by the attack of the anionic propagation species on the methylene carbon of the carbonate group, which leads to an alkyl‐oxygen rupture. By performing the cure in the thermobalance we could evaluate the loss of CO₂ produced in the samples containing carbonates. The kinetics were studied by DSC and analyzed with isoconversional procedures. The addition of carbonates slows down the curing rate. Thermogravimetric analysis (TGA) and dynamic mechanical thermal analysis (DMTA) experiments were used to evaluate the properties of the materials obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2873–2882, 2006     

Efficient Synthesis of Nitroflavones by Cyclodehydrogenation of 2′-Hydroxychalcones and by the Baker-Venkataraman Method

Summary. Several nitroflavone derivatives were synthesized by cyclodehydrogenation of 2′-hydroxychalcones and by the Baker-Venkataraman approach, starting from 2′-hydroxyacetophenones and benzoic acid derivatives. Nitroflavones synthesised by the first synthetic approach were obtained in better global yields than those obtained by the later method. The structures of all new compounds were elucidated by microanalyses, 1D and 2D NMR, IR, and mass spectroscopic measurements.     

Sub-Ramsey numbers for arithmetic progressions

Letm 3 andk 1 be two given integers. Asub-k-coloring of [n] = {1, 2,...,n} is an assignment of colors to the numbers of [n] in which each color is used at mostk times. Call an arainbow set if no two of its elements have the same color. Thesub-k-Ramsey number sr(m, k) is defined as the minimumn such that every sub-k-coloring of [n] contains a rainbow arithmetic progression ofm terms. We prove that((k – 1)m ²/logmk) sr(m, k) O((k – 1)m ² logmk) asm , and apply the same method to improve a previously known upper bound for a problem concerning mappings from [n] to [n] without fixed points.Research supported in part by Allon Fellowship and by a Bat Sheva de-Rothschild grant.Research supported in part by the AKA Research Fund of the Hungarian Academy of Sciences, grant No. 1-3-86-264.     

Diffusion coefficient measurement in a microfluidic analyzer using dual-beam microscale-refractive index gradient detection. Application to on-chip molecular size determination

We report a microchip-based detection scheme to determine the diffusion coefficient and molecular mass (to the extent correlated to molecular size) of analytes of interest. The device works by simultaneously measuring the refractive index gradient (RIG) between adjacent laminar flows at two different positions along a microchannel. The device, referred to as a microscale molecular mass sensor (micro-MMS), takes advantage of laminar flow conditions where the mixing of two streams occurs essentially by diffusion across the boundary between the two streams. Two flows merge on the microchip, one containing solvent only, referred to as the mobile phase stream and one which contains the analyte(s) of interest in the solvent, i.e. the sample stream. As these two streams merge and flow parallel to each other down the microchannel a RIG is created by the concentration gradient. The RIG is further influenced by analyte diffusion from the sample stream into the mobile phase stream. Measuring the RIG at a position close to the merging point (upstream signal) and simultaneously a selected distance further down the microchannel (downstream signal) provides real-time data related to the extent a given analyte has diffused, which can be readily correlated to analyte molecular mass by taking the ratio of the downstream-to-upstream signals. For the dual-beam RIG measurements, a diode laser output is coupled to a single mode fiber optic splitter with two output fibers. Light from each fiber passes through a graded refractive index (GRIN) lens forming a collimated beam that then passes through the microchannel and then on to a position sensitive detector (PSD). The RIG at both detection positions deflects the two collimated probe beams. The deflection angle of each beam is then measured on two separate PSDs. The micro-MMS was evaluated using polyethylene glycols (PEGs), sugars, and as a detector for size-exclusion chromatography (SEC). Peak purity can be readily identified using the micro-MMS with SEC. The limit of detection was 0.9 ppm (PEG at 11 840 g/mol) at the upstream detection position corresponding to a RI limit of detection (LOD) (3sigma) of 7-10(-8) RI. The pathlength for the RIG measurement was 200 microm and the angular LOD was 0.23 micro(rad) with a detection volume of 8 nl at both positions. The average molecular mass resolution was 9% (relative standard deviation) for a series of PEGs ranging in molecular mass from 106 to 22 800 g/mol. With this excellent mass resolution, small molecules such as monosaccharides, disaccharides, and so on, are readily distinguished. The sensor is demonstrated to readily determine unknown diffusion coefficients.     

Flow systems exploiting in-line prior assays

An expert sequential injection system involving a prior assay is proposed for spectrophotometric determination of phosphate and eventually zinc in soil extracts. The result of phosphate determination is the basis for a concentration-oriented decision regarding to the need or not for zinc determination. Zinc was only determined if a threshold value (peak height corresponding to 5.0 mg l⁻¹ P) was surpassed. The methods involved formation of molybdenum blue and the Rhodamine 6G/ammonium thiocyanate/Zn²⁺ ternary complex. Variations in the threshold value were < 2% during 4 h operating periods, false responses were not verified, and the analytical time was reduced in about 30%. Precise results (R.S.D. <3% P and < 1% Zn) in agreement with spectrophotometry and flame atomic absorption spectrometry were obtained. The innovation permits faster information processing, as well as a reduction in the number of measurements, number of analytical steps, laboratorial time, and consumption of sample and reagents, thus waste generation.     

THE α-OXIDASE SYSTEM OF YOUNG PEA LEAVES (Pisum sativum) AS GENERATOR OF ELECTRONICALLY EXCITED STATES. EXCITATION IN THE DARK UNDER NATURAL CONDITIONS

Abstract. The aerobic oxidation of saturated long chain fatty acids to the lower aldehyde and CO₂ catalyzed by the α-oxidase system of young leaves from germinating Pisum sativum results in concomitant excitation of the chloroplasts or/and fractions present in the α-oxidase preparation. The excitation is attested to by both chlorophyll emission and Hill activity. This is the first case of photobiochemistry without light within a natural system.     

Determination of N-nitrosamines by HPTLC with Fluorescence Detection — Use of Non-Ionic Surfactants as Enhancing Agents

JPC – Journal of Planar Chromatography – Modern TLC - The dansyl derivatives of N-nitrosodimethylamine, N-nitrosodi-ethylamine, and N-nitrosodibuthylamine have been separated by HPTLC...