Oxobenzo[f]benzopyrans as new fluorescent photolabile protecting groups for the carboxylic function

The properties of three oxobenzo[f]benzopyrans as new fluorogenic photolabile protecting groups for the carboxylic function of amino acids were studied. Fluorescent amino acid conjugates were efficiently prepared and characterised. Photodeprotection of these compounds was carried out by irradiation at 300, 350 and 419 nm, the most suitable wavelength being 350 nm, on account of short irradiation times and good deprotection yields.     

Determination of six metals in galician red wines (in northwestern Spain) by capillary electrophoresis

A simple technique is described for the routine simultaneous capillary electrophoretic determination of 6 cations in wine. Separation was achieved on a fused silica capillary column with a UV-Cat-1, alpha-hydroxysobutyric acid and 18-crown-6-ether buffer at pH 4.5 and indirect UV detection at 214 nm. The content of magnesium, sodium, potassium, calcium, manganese, and lithium was determined. The method is quantitative, with recoveries in the 92-102% range, and linear over more than one order of magnitude. The precision is better than 2.5-3.4%. The method is sensible, with detection limits between 0.01 and 0.06 mg/L. Twenty-five red wines with a Certified Brand of Origin from Galicia (north-western Spain) were analyzed by the proposed method. Various wines showed very similar electrophoretic profiles, but significant quantitative differences were observed.     

Solution conformation of a nitrobenzoxadiazole derivative of the polyene antibiotic nystatin: a FRET study

Nystatin is a polyene antibiotic frequently applied in the treatment of topical fungal infections. In this work, a 7-nitrobenz-2-oxa-1,3-diazole (NBD) hexanoyl amide derivative of nystatin was synthesized and its detailed photophysical characterization is presented. The average conformation of the labelled antibiotic in tetrahydrofuran, ethanol and methanol was determined by intramolecular (tetraene to NBD) fluorescence resonance energy transfer measurements. At variance with the literature [Can. J. Chem. 63 (1985) 77-85], it was concluded that there is no need to invoke a solvent-dependent conformational equilibrium between extended and closed conformers of the antibiotic, because the mean tetraene-to-NBD separating distance was found to remain constant (approximately 18 A) in all the solvents studied. In addition, the large solvent dependence of the fluorescence anisotropy observed for the non-derivatized nystatin, was rationalized on the basis of the prolate ellipsoidal geometry of the molecule. It was concluded that the rod shaped and amphipathic antibiotic remains monomeric in different solvents within the concentration range studied (2-20 microM).     

Influence of rotation and isotope effects on the dynamics of the N((2)D)+H(2) reactive system and of its deuterated variants

Integral cross sections and thermal rate constants have been calculated for the N((2)D)+H(2) reaction and its isotopic variants N((2)D)+D(2) and the two-channel N((2)D)+HD by means of quasiclassical trajectory and statistical quantum-mechanical model methods on the latest ab initio potential-energy surface [T.-S. Ho et al., J. Chem. Phys. 119, 3063 (2003)]. The effect of rotational excitation of the diatom on the dynamics of these reactions has been investigated and interesting discrepancies between the classical and statistical model calculations have been found. Whereas a net effect of reagent rotation on reactivity is always observed in the classical calculations, only a very slight effect is observed in the case of the asymmetric N((2)D)+HD reaction for the statistical quantum-mechanical method. The thermal rate constants calculated on this Potential-Energy Surface using quasiclassical trajectory and statistical model methods are in good agreement with the experimental determinations, although the latter are somewhat larger. A reevaluation of the collinear barrier of the potential surface used in the present study seems timely. Further theoretical and experimental studies are needed for a full understanding of the dynamics of the title reaction.     

Theoretical study of the electronic structure of CnS (n=1-6) thiocumulenes

Linear sulfur-carbon chains C(n)S (n=1-6) of astronomical interest were examined by means of several theoretical methods. The three smallest compounds of the series were chosen to evaluate the performance of several computational models, including Hartree-Fock theory, density functional theory with the Becke's three parameter exchange functional and the correlation functional of Lee, Yang, and Parr (B3LYP), and electron-correlated methods (second-order Moller-Plesset perturbation method (MP2), configuration interaction method including single and double excitations (CISD), and quadratic configuration interaction method including single and double excitations (QCISD) in combination with a large variety of basis sets. The systematic comparison between the experiment and theory indicates that the B3LYP/6-311G** method can be considered suitable for the study of the electronic structures of the C(n)S compounds. The electronic ground states of the C(n)S molecules alternate between 1Sigma and 3Sigma for odd and even values of n, respectively. The B3LYP/6-311G** wave functions for these electronic ground states were analyzed by means of the atoms in molecules (AIM) and natural bond orbital (NBO) methods. Both approaches suggest that the electronic structures for the singlet and triplet compounds must be considered separately. According to the NBO method, singlet compounds can be properly represented by acetylenic structures with alternating single and triple bonds (S[triple bond]C-C[triple bond]C...). However, triplet compounds are better described by means of double bond-double bond cumulenic structures (S=C=C=C=C...) as a consequence of the average between different alpha and beta electronic densities. AIM delocalization indexes and NBO interactions between localized orbitals also indicate that these structures are strongly pi delocalized. Finally, the different singlet and triplet structures proposed provide a consistent explanation for the geometries, dipole moments, and spin-density values of the C(n)S compounds studied.     

New macrocycles derived from biphenyl for pH-switched solvent extraction

Four new fluorescent macrocyclic ligands derived from biphenyl are described. The new compounds have been used in liquid-liquid extraction experiments and the influence of pH has been studied in those ligands containing carboxylic groups. The results obtained for the latter ligands have been compared with those observed in the presence of an external acid.     

Effect of ionic strength on the formal potential of the glass electrode in various saline media

We examined the variation with ionic strength (I, adjusted with KCl, KNO₃, KBr, NaCl or NaClO₄) of the formal potential (E_const) for glass electrodes exhibiting a Nernstian response (i.e. E_cell=E_const−s log [H⁺]). For this purpose, we investigated the different factors included in the formal potential, so we obtained reported values for the liquid junction potential as a function of ionic strength and determined the logarithm of the activity coefficient for the proton in various saline media, using Pitzer equations.     

Influence of structure and solubility of chain transfer agents on the RAFT control of dispersion polymerisation in scCO2

Reversible addition–fragmentation chain transfer (RAFT) dispersion polymerisation of methyl methacrylate (MMA) is performed in supercritical carbon dioxide (scCO₂) with 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid (DDMAT) present as chain transfer agent (CTA) and surprisingly shows good control over PMMA molecular weight. Kinetic studies of the polymerisation in scCO₂ also confirm these data. By contrast, only poor control of MMA polymerisation is obtained in toluene solution, as would be expected for this CTA which is better suited for acrylates. In this regard, we select a range of CTAs and use them to determine the parameters that must be considered for good control in dispersion polymerisation in scCO₂. A thorough investigation of the nucleation stage during the dispersion polymerisation reveals an unexpected “in situ two-stage” mechanism that strongly determines how the CTA works. Finally, using a novel computational solvation model, we identify a correlation between polymerisation control and degree of solubility of the CTAs. All of this ultimately gives rise to a simple, elegant and counterintuitive guideline to select the best CTA for RAFT dispersion polymerisation in scCO₂.

RAFT dispersion polymerisation of methyl methacrylate is performed in scCO₂ with 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid (DDMAT) present as chain transfer agent (CTA) and surprisingly shows good control over PMMA molecular weight.     

Indene and pseudoazulene discotic liquid crystals: a synthetic and structural study

Several new liquid-crystalline indene and pseudoazulene systems are reported. These molecules give rise to either columnar hexagonal mesophases and/or columnar plastic phases. The unique nature of these compounds stems from their non-classical discotic structure. Although the molecules have rigid aromatic cores, they lack terminal tails and instead the polarizable atoms (S, halogens) or polar groups (CN, CO) act as unusual soft parts. On the basis of many structurally related materials, we conclude that for this type of compound molecular stacking in the solid state is a prerequisite for the appearance of a columnar mesophase, although other intermolecular interactions within the layers are also important in establishing liquid-crystalline order. The behavior reported for these mesomorphic molecules opens up new possibilities in the search for related molecular interactions that might be useful for the construction of supramolecular architectures with particular properties.     

Reaction of 2H-azirine phosphine oxide and -phosphonates with nucleophiles. Stereoselective Synthesis of functionalized aziridines and alpha- and beta-aminophosphorus derivatives

[reaction: see text] A simple and efficient stereoselective synthesis of aziridine-2-phosphonate 3, and -phosphine oxide 5 by diastereoselective addition of Grignard reagents to 2H-azirine phosphonate 1 and -phosphine oxide 4 is reported. Similarly, the addition of heterocyclic amines and benzenethiol to aziridines 1 and 4 yielded functionalized aziridines 10, 11, and 18. These aziridines are used as intermediates for the regioselective synthesis of beta-aminophosphine oxides 6 and beta-aminophosphonates 7, as well as alpha- aminophosphonates 8. Phenylsulfenyl-substituted alpha-aminophosphorus derivatives 15 and 19 are obtained directly from benzenethiol and 2H-azirine phosphonates 1 and -phosphine oxides 4.